1. Safety Information
Please read and understand all instructions before assembly and use. Keep this manual for future reference.
- Anti-Tip Kit: For safety, secure the product to the wall using the included anti-tip kit. This prevents accidental tipping, especially in households with children or pets.
- Weight Limit: Do not exceed the recommended weight capacity for the vanity table and stool.
- Assembly: Ensure all screws and fasteners are tightened securely before use. Periodically check for loose connections.
- Placement: Place the vanity on a flat, stable surface. Avoid placing it near heat sources or in direct sunlight to prevent material damage.
- Mirror Care: Handle the mirror with care. Clean with a soft, damp cloth and a mild glass cleaner.
Figure 1.1: Installation of anti-toppling fittings to secure the vanity to a wall, enhancing stability and safety.
2. Package Contents
Verify that all components are present before beginning assembly.
- 1 x Dressing Table
- 1 x Cushioned Stool
- 1 x Screw Bag (containing all necessary hardware)
- 1 x Instruction Manual
- 3 x Removable Organizers (pre-installed or separate)
3. Setup and Assembly
Assembly is straightforward. An Allen wrench is typically included for tightening screws. It is recommended to assemble on a soft, clean surface to prevent scratches.
3.1. Vanity Table Assembly
- Carefully unbox all components and lay them out.
- Attach the four legs to the main vanity table body using the provided screws and Allen wrench. Ensure they are securely fastened.
- Position the vanity table in its desired location.
- Install the anti-tip kit to the back of the vanity and secure it to the wall as per the separate anti-tip kit instructions.
Figure 3.1: The fully assembled vanity set, ready for use.
3.2. Stool Assembly
- Assemble the stool base components according to the diagrams in the instruction manual.
- Attach the cushioned seat to the assembled stool base. Ensure all connections are tight for stability.
Figure 3.2: The stool features a support bar for enhanced stability.
4. Operating Instructions
4.1. Flip-Top Mirror and Storage
The vanity features a flip-top design for versatile use.
- To access the mirror and internal storage, gently lift the central panel of the tabletop. The mirror will automatically position itself.
- The internal compartment is ideal for storing cosmetics, jewelry, and accessories.
- To convert the vanity into a writing desk, simply lower the central panel until it is flush with the tabletop. This conceals the mirror and storage.
Figure 4.1: The 2-in-1 design allows the unit to function as both a vanity and a writing desk.
4.2. Drawers and Removable Organizers
The vanity includes two side drawers and three removable organizers for customized storage.
- Pull the antique ring pulls to open the drawers.
- The removable organizers can be placed within the drawers, the central compartment, or directly on the tabletop to suit your organizational needs.
Figure 4.2: The vanity's storage features, including drawers and versatile removable organizers.
5. Maintenance
- Cleaning: Wipe the surfaces with a dry cloth. For stubborn marks, use a slightly damp cloth with a mild, non-abrasive cleaner, then dry immediately. Avoid harsh chemicals.
- Dusting: Regularly dust the vanity with a soft, dry cloth to prevent buildup.
- Hardware: Periodically check all screws and fittings to ensure they remain tight. Retighten if necessary.
- Avoid Moisture: Do not expose the vanity to excessive moisture or humidity. Promptly wipe up any spills.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Vanity feels wobbly or unstable. | Loose screws or uneven floor. | Ensure all leg screws are tightened. Adjust floor levelers if present, or place shims under legs on uneven surfaces. Verify anti-tip kit is installed correctly. |
| Drawers do not slide smoothly. | Obstruction in the drawer slides or misaligned drawer. | Remove the drawer and check for any debris in the slides. Ensure the drawer is inserted correctly and aligned with the tracks. |
| Flip-top mirror does not stay open or close properly. | Hinge mechanism issue or obstruction. | Check the hinges for any damage or loose screws. Ensure no items are obstructing the lid's movement. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | B071CNBFCK |
| Color | Black |
| Material | Engineered Wood, Rubberwood |
| Table Dimensions (L x W x H) | 35 3/8'' x 15 1/2'' x 29 7/8'' (90 x 39.5 x 76 cm) |
| Mirror Size (L x H) | 12 1/8'' x 13 5/8'' (30.5 x 34.5 cm) |
| Stool Dimensions (L x W x H) | 15 3/4'' x 11 5/8'' x 17 3/8'' (40 x 29.5 x 44 cm) |
| Product Weight | 42 lbs (19 kg) |
| Number of Drawers | 2 |
| Assembly Required | Yes |
Figure 7.1: Detailed dimensions of the VASAGLE Vanity Set.
8. Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase documentation or visit the official VASAGLE website.
If you encounter any issues or have questions regarding your product, please contact our customer service team for assistance.
