Hot Spring Spas Accolade Freshwater Ag+ Continuous Silver Ion Cleaner

Introduction

This manual provides essential information for the proper use and maintenance of the Hot Spring Spas Accolade Freshwater Ag+ Continuous Silver Ion Cleaner. This product is designed as a replacement for use in Hot Spring, Tiger River, Hotspot, Solana, and Limelight hot tubs. It is formulated to last approximately four months, simplifying spa management and contributing to a halogen-free water environment. Additionally, it enhances the performance of ozone systems.

Safety Information

• Always read and follow all instructions carefully before use.
• Keep this product out of reach of children and pets.
• Do not ingest the product. In case of ingestion, seek immediate medical attention.
• Avoid contact with skin and eyes. In case of contact, rinse thoroughly with water.
• Store in a cool, dry place, away from direct sunlight and incompatible materials.
• Ensure proper ventilation when handling the product.

Product Overview

The Hot Spring Spas Accolade Freshwater Ag+ Continuous Silver Ion Cleaner is a cartridge-based system designed to continuously release silver ions into your spa water. These ions work to sanitize the water, reducing the need for traditional halogen-based sanitizers.

Image: Three individual retail packages of the Freshwater Mineral Spa Sanitizer, each containing a cartridge. This illustrates the product as it is typically sold in a multi-pack.

It is crucial to use only genuine Hot Spring Freshwater Ag+ cartridges. Using incompatible or non-approved parts can lead to improper water sanitation and potential damage to your spa system.

Image: An example of an incompatible or incorrect spa part, clearly marked with a red circle and slash, signifying that this type of component should NOT be used with your Hot Spring spa system. Always ensure you are using the correct replacement parts.

Setup and Installation

1. Identify Cartridge Location: Locate the designated slot or filter standpipe in your Hot Spring, Tiger River, Hotspot, Solana, or Limelight hot tub where the silver ion cartridge is to be inserted. Refer to your specific spa model's owner's manual for precise location if unsure.
2. Remove Old Cartridge (if applicable): If replacing an existing cartridge, carefully remove the old unit from its housing. Dispose of the old cartridge according to local regulations.
3. Insert New Cartridge: Gently insert the new Hot Spring Freshwater Ag+ Continuous Silver Ion Cleaner cartridge into the designated slot. Ensure it is seated firmly and correctly. Do not force the cartridge into place.
4. Initial Operation: Once installed, the cartridge will begin to release silver ions into the spa water. It is recommended to run your spa's filtration cycle as usual to help distribute the silver ions throughout the water.

Operating Instructions

The Freshwater Ag+ Continuous Silver Ion Cleaner operates passively once installed. Its primary function is to continuously release silver ions into the spa water, which act as a sanitizer. This system is designed to work in conjunction with your spa's existing filtration and ozone (if equipped) systems to maintain clean and clear water.

• The cartridge is designed for continuous operation over a period of four months.
• While the silver ion system reduces the need for high levels of halogen sanitizers (like chlorine or bromine), it is still important to regularly test your spa water and maintain proper water balance (pH, alkalinity, calcium hardness).
• Consult your spa's owner's manual for recommended water chemistry parameters and testing frequency.

Maintenance

The Hot Spring Spas Accolade Freshwater Ag+ Continuous Silver Ion Cleaner cartridge has a lifespan of approximately four months. Regular replacement is crucial to ensure effective and continuous water sanitation.

• Replacement Schedule: Replace the cartridge every four months. Marking the installation date on the cartridge or in a maintenance log can help you remember the replacement schedule.
• Water Testing: Continue to regularly test your spa water for proper balance and sanitizer levels, even with the silver ion system in place. Adjust water chemistry as needed.
• Filter Cleaning: Ensure your spa's main filter cartridges are regularly cleaned and replaced as per your spa manufacturer's recommendations to maintain optimal water flow and filtration efficiency.

Troubleshooting

If you experience issues with water quality while using the Freshwater Ag+ Continuous Silver Ion Cleaner, consider the following:

• Cloudy Water:
  • Check if the cartridge is due for replacement (every four months).
  • Ensure your spa's main filter is clean and not clogged.
  • Verify water balance (pH, alkalinity, calcium hardness) and adjust if necessary.
  • Consider shocking the spa water with a non-chlorine shock if organic contaminants are present.
• Low Sanitizer Levels:
  • Confirm the cartridge is not expired and has been replaced within the last four months.
  • Ensure proper water circulation and filtration.
  • The silver ion system works to reduce the need for halogens, but supplemental sanitization may be required based on bather load and usage.
• Unusual Odors:
  • Test water chemistry. Odors can indicate imbalanced water or the presence of contaminants.
  • Ensure proper ventilation around the spa.

For persistent issues, consult your Hot Spring Spas dealer or a qualified spa technician.

Specifications

Warranty and Support

Specific warranty information for the Hot Spring Spas Accolade Freshwater Ag+ Continuous Silver Ion Cleaner is typically provided at the point of purchase or within the product packaging. Please retain your proof of purchase for any warranty claims.

For technical support, product inquiries, or to locate an authorized dealer, please refer to the official Hot Spring Spas website or contact their customer service directly. Contact information is usually available on the product packaging or the manufacturer's official website.