Introduction
This manual provides comprehensive instructions for the proper use and maintenance of the GROHE 36407001 Remote Control. This device is designed to facilitate the adjustment of various settings on compatible GROHE bathroom appliances, such as faucet sensitivity and timing. Please read this manual thoroughly before initial use to ensure correct operation and to prevent damage.
Product Overview
Figure 1: Front view of the GROHE 36407001 Remote Control, showing the display screen, power button, back button, OK button, and navigation arrows.
Figure 2: Technical drawing illustrating the dimensions of the GROHE 36407001 Remote Control. Dimensions are approximately 60mm width, 120mm height, and 20mm depth.
Setup
- Battery Installation:
Locate the battery compartment on the back of the remote control. Open the compartment cover and insert the required Alkaline batteries, ensuring correct polarity (+/-). Close the cover securely.
- Power On:
Press and hold the power button (⏻) located on the remote control until the display illuminates.
- Establishing Connection:
The GROHE 36407001 uses infrared (IR) technology. Point the remote control directly at the IR sensor of the GROHE bathroom appliance you wish to adjust. Maintain a close distance for optimal signal transmission, typically within 10 meters, but closer proximity may be required for initial connection or specific adjustments.
Operating Instructions
The remote control features a display screen and several buttons for navigation and selection:
- Power Button (⏻): Press to turn the device on or off.
- Back Button (↩): Used to return to the previous menu or cancel an action.
- Navigation Arrows (▲ ▼ ◀ ▶): Use these buttons to scroll through menu options or adjust values.
- OK Button: Press to confirm a selection or enter a submenu.
Adjusting Appliance Settings:
- Ensure the remote control is powered on and pointed at the target GROHE appliance.
- Use the navigation arrows to browse the main menu on the remote's display.
- Select the desired setting category (e.g., "Sensitivity," "Flow Time," "Temperature Limit") using the OK button.
- Navigate to the specific setting you wish to modify.
- Use the navigation arrows to increase or decrease the value or select an option.
- Press the OK button to confirm the new setting. The change should be applied to the GROHE appliance.
- Use the Back button to exit menus or return to the main screen.
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface and electronic components.
- Battery Replacement: When the display becomes dim or the remote control becomes unresponsive, replace the batteries with new Alkaline batteries of the specified type. Dispose of old batteries according to local regulations.
- Storage: Store the remote control in a dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control does not power on. | Dead or incorrectly installed batteries. | Replace batteries with new ones, ensuring correct polarity. |
| Settings are not applied to the appliance. |
|
|
| Display is dim or flickering. | Low battery power. | Replace batteries. |
Specifications
- Model Name: Remote Control
- Model Number: 36407001
- Brand: GROHE
- Color: GROHE CHROME (This refers to the finish of compatible GROHE products, not the remote control itself.)
- Connectivity Technology: Infrared
- Controller Type: Button Control
- Compatible Devices: Bathroom Appliances (GROHE)
- Maximum Range: 10 Meters
- Battery Type: Alkaline
- Special Feature: Ergonomic
- Dimensions (approximate): 120mm (Height) x 60mm (Width) x 20mm (Depth)
Warranty and Support
For warranty information and technical support, please refer to the official GROHE website or contact GROHE customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.
GROHE Official Website: www.grohe.com
