1. Introduction
This user manual provides comprehensive instructions for the safe installation, operation, and maintenance of the Orbit LWP2-50W-CW LED Wallpack. Please read this manual thoroughly before installation and retain it for future reference. This product is designed for outdoor wall-mounted lighting applications, providing efficient and durable illumination.
2. Product Overview
The Orbit LWP2-50W-CW is a high-performance LED wallpack designed for robust outdoor lighting. It features a durable bronze finish and provides 5000K cool white illumination, operating efficiently within a 100V to 277V range.
Figure 2.1: Orbit LWP2-50W-CW LED Wallpack. A detailed view of the Orbit LWP2-50W-CW LED Wallpack, showcasing its robust bronze housing and clear, textured lens designed for efficient light distribution. The fixture features visible mounting points and a durable construction suitable for outdoor wall-mounted applications.
Key Features:
- 50W LED Wallpack
- Wide Voltage Input: 100V~277V
- Color Temperature: 5000K (Cool White)
- Durable Bronze Finish
- Suitable for outdoor wall-mounted applications
3. Safety Information
Always follow basic safety precautions when installing or servicing electrical equipment. Failure to do so may result in serious injury or death.
- WARNING: Risk of electric shock. Disconnect power before installation or servicing.
- Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.
- Ensure the supply voltage is compatible with the fixture's requirements (100V~277V).
- Do not operate the fixture with damaged wiring or components.
- Wear appropriate personal protective equipment (PPE) during installation.
- Do not modify the fixture in any way.
4. Installation and Setup
4.1 Pre-Installation Checks:
- Unpack the fixture carefully and inspect for any shipping damage.
- Verify that all components are present.
- Ensure the mounting surface is structurally sound and can support the weight of the fixture.
- Turn off power at the circuit breaker before beginning installation.
4.2 Wiring Instructions:
The fixture is designed for universal voltage input (100V~277V). Follow these steps for proper wiring:
- Connect the black wire from the fixture to the LINE (L) wire from the power supply.
- Connect the white wire from the fixture to the NEUTRAL (N) wire from the power supply.
- Connect the green (or bare copper) wire from the fixture to the GROUND (GND) wire from the power supply.
- Secure all wire connections with appropriate wire nuts or connectors.
- Ensure all connections are tight and insulated.
4.3 Mounting Instructions:
- Attach the mounting plate (if separate) to the junction box or desired mounting surface using appropriate screws.
- Align the fixture with the mounting plate/surface.
- Secure the fixture to the mounting plate/surface using the provided screws or hardware.
- Ensure the fixture is securely fastened and level.
- Once installation is complete, restore power at the circuit breaker.
5. Operating Instructions
The Orbit LWP2-50W-CW LED Wallpack operates automatically once power is supplied. It does not feature user-adjustable settings or controls. The fixture will illuminate when power is on and turn off when power is disconnected.
For automated operation (e.g., dusk-to-dawn), an external photocell or timer switch must be installed by a qualified electrician in conjunction with the wallpack.
6. Maintenance
The Orbit LWP2-50W-CW LED Wallpack requires minimal maintenance. Regular inspection and cleaning will help ensure optimal performance and longevity.
6.1 Cleaning:
- Before cleaning, ensure power to the fixture is turned off at the circuit breaker.
- Clean the exterior of the fixture with a soft, damp cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or lens.
- Allow the fixture to dry completely before restoring power.
6.2 Inspection:
- Periodically inspect the fixture for any signs of damage, such as cracks in the housing or lens, or frayed wiring.
- Check that all mounting screws are secure.
- If any damage is observed, disconnect power immediately and contact a qualified electrician for repair or replacement.
7. Troubleshooting
Refer to the table below for common issues and their potential solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not illuminate. | No power supply. Loose wiring connection. Faulty fixture. | Check circuit breaker and power source. Verify all wiring connections are secure (with power off). Contact customer support if power and wiring are confirmed good. |
| Light flickers or dims. | Unstable power supply. Loose wiring. Fixture nearing end of life. | Consult an electrician to check power stability. Check wiring connections (with power off). Consider replacement if fixture is old. |
| Fixture turns on/off unexpectedly. | External photocell/timer malfunction. Intermittent power supply. | Inspect external controls or consult an electrician. Check power supply stability. |
8. Specifications
| Attribute | Detail |
|---|---|
| Model Number | LWP2-50W-CW |
| Power Consumption | 50W |
| Input Voltage | 100V~277V |
| Color Temperature | 5000K (Cool White) |
| Finish | Bronze |
| Manufacturer | OrbitIndustries |
| ASIN | B06Y26B9FJ |
| Date First Available | March 20, 2017 |
9. Warranty Information
This Orbit LWP2-50W-CW LED Wallpack is covered by a standard manufacturer's warranty against defects in materials and workmanship. The specific terms and duration of the warranty may vary. Please refer to the warranty card included with your product or visit the official Orbit Industries website for detailed warranty information and registration.
Note: Warranty may be voided if the product is not installed or maintained according to the instructions in this manual, or if it is modified.
10. Customer Support
If you have any questions, require technical assistance, or need to report an issue with your Orbit LWP2-50W-CW LED Wallpack, please contact Orbit Industries customer support.
For the most current contact information, please visit the official Orbit Industries website or refer to the packaging.
When contacting support, please have your product model number (LWP2-50W-CW) and purchase date available.
