Champion Power Equipment 50-Amp ParaLINK Parallel Kit Instruction Manual

Introduction

The Champion Power Equipment 50-Amp ParaLINK Parallel Kit (Model 100319) is engineered to seamlessly connect two Champion 2500-watt or higher inverter generators. This innovative kit allows you to combine the power output of two generators, providing increased wattage for demanding applications, such as running two 15,000 BTU RV air conditioners. Its design prioritizes ease of use with a simple clip-on connection, requiring no tools for assembly. The kit features standard 120V 50A RV (14-50R) and 120V 30A locking outlets (L5-30R), along with integrated 30-amp and 50-amp circuit breakers for overload protection. This manual provides comprehensive instructions for safe and efficient operation.

Safety Information

Always read and understand all safety warnings and instructions provided with your Champion inverter generators and this parallel kit before operation. Failure to follow these instructions can result in serious injury or death. Ensure the parallel kit is used only in a well-ventilated area and never indoors. Carbon monoxide is a colorless, odorless, poisonous gas. This product may expose you to chemicals including carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov. Always ensure all connections are secure before starting generators. Do not operate in wet conditions.

What's in the Box

• ParaLINK Parallel Kit

Setup

Follow these steps to set up your ParaLINK Parallel Kit with two compatible Champion inverter generators:

1. Position Generators: Place your two Champion inverter generators on a level, stable surface in a well-ventilated outdoor area. Ensure sufficient space between them for proper air circulation and access.
2. Mount Parallel Kit: The ParaLINK Parallel Kit is designed for easy, tool-free installation. Simply clip the kit onto the handle of one of your inverter generators. Ensure it is securely fastened.
3. Connect Parallel Cables: Locate the parallel operation ports on each generator. These are typically color-coded (red and black). Connect the corresponding red and black cables from the parallel kit to the respective ports on each generator. Ensure a firm connection.

Diagram illustrating two inverter generators connected to the Champion ParaLINK Parallel Kit for combined power.

The ParaLINK Parallel Kit securely mounted on the handle of an inverter generator.

A hand connecting the parallel operation cable to the designated port on a Champion inverter generator.

Close-up view of the red and black parallel operation cables connected to the corresponding ports on a Champion inverter generator.

Two Champion inverter generators linked together using the ParaLINK Parallel Kit, ready for increased power output.

Setup Video Guide

Operating Instructions

Once the parallel kit is securely connected to both generators, you can begin operation:

1. Start Generators: Follow the starting procedures for each of your Champion inverter generators as outlined in their respective manuals. Ensure both generators are running smoothly.
2. Connect Appliances: Plug your RV power cord or other high-wattage appliances into the appropriate outlets on the parallel kit. The kit provides a 120V 50A RV (14-50R) outlet and a 120V 30A locking outlet (L5-30R).
3. Monitor Power: The combined power from both generators allows for higher output, capable of running appliances such as two 15,000 BTU RV air conditioners. The integrated 30-amp and 50-amp circuit breakers provide protection against overloads. If an overload occurs, the breaker will trip, interrupting power to the affected outlet. Reset the breaker after reducing the load.

Front view of Champion Power Equipment 50-Amp ParaLINK Parallel Kit showing 50A RV and 30A locking outlets, and circuit breakers.

Champion Power Equipment ParaLINK Parallel Kit connected to an inverter generator with an RV power cord plugged into the 50A outlet.

Maintenance

The ParaLINK Parallel Kit requires minimal maintenance. Regularly inspect the cables and connectors for any signs of wear, damage, or corrosion. Ensure all connections remain tight. Keep the unit clean and free from dirt, debris, and moisture. Store the kit in a dry, protected area when not in use.

Troubleshooting

If you encounter issues with your ParaLINK Parallel Kit, consider the following:

• No Power Output:
  • Ensure both generators are running correctly and producing power.
  • Check all parallel cable connections to ensure they are secure and properly inserted.
  • Verify that the circuit breakers on the parallel kit have not tripped. Reset if necessary.
  • Confirm that the total load connected does not exceed the combined capacity of the generators.
• Loose Connection: If the kit feels loose on the generator handle, re-secure the clip-on mechanism.
• Damaged Cables/Connectors: If any cables or connectors appear damaged, discontinue use immediately and contact Champion Power Equipment for replacement parts or service.

For further assistance, refer to the troubleshooting section of your generator's owner's manual or contact Champion Power Equipment customer support.

Specifications

Warranty and Support

The Champion Power Equipment 50-Amp ParaLINK Parallel Kit is backed by a 1-year limited warranty. Champion Power Equipment also provides FREE lifetime technical support from dedicated experts. For warranty claims, technical assistance, or to locate a service center, please contact Champion Power Equipment customer service.