WENKO Habos 22415100

WENKO Habos Toilet Seat Instruction Manual

Model: Habos 22415100

1. Introduction

Thank you for choosing the WENKO Habos Toilet Seat. This premium toilet seat is designed for comfort, hygiene, and durability. It features an integrated automatic lowering mechanism (Easy-Close) for quiet operation and a Fix-Clip hygiene fastening system for easy installation and cleaning. Constructed from high-quality, break-resistant thermoplastic, this seat offers a hygienic, non-porous surface.

WENKO Habos Toilet Seat, closed, top view

Figure 1: WENKO Habos Toilet Seat (Closed)

WENKO Habos Toilet Seat, open, top view

Figure 2: WENKO Habos Toilet Seat (Open)

2. Safety Instructions

  • Do not stand on the toilet seat or lid.
  • Avoid using abrasive cleaners or harsh chemicals, as these can damage the surface and hinges.
  • Ensure all fastening components are securely tightened after installation to prevent movement.
  • Keep fingers clear of the hinge area during closing, although the soft-close mechanism reduces risk.

3. Package Contents

Verify that all components are present before beginning installation:

  • WENKO Habos Toilet Seat (Lid and Ring)
  • Fix-Clip Hygiene Fastening System (Stainless Steel)
  • Rubber Inserts (to prevent slipping)

4. Setup and Installation

The Fix-Clip fastening system allows for quick and secure installation on most standard toilets. The fastening distance is adjustable from 7.5 cm to 18 cm.

  1. Prepare the Toilet Bowl: Ensure the toilet bowl's mounting holes are clean and free of debris.
  2. Insert Fix-Clip Fasteners: Place the Fix-Clip fasteners into the mounting holes of the toilet bowl. Ensure the rubber inserts are positioned correctly to prevent the seat from slipping.
  3. Adjust Fastening Distance: The Fix-Clip system is adjustable. Position the fasteners to match the distance between the mounting holes on your toilet bowl.
  4. Attach Toilet Seat: Align the toilet seat's hinges with the Fix-Clip fasteners and press down firmly until it clicks into place.
  5. Secure Fasteners: Tighten the fasteners from underneath the toilet bowl to secure the seat firmly. Do not overtighten.
Diagram showing adjustable fixation distance for toilet seat

Figure 3: Adjustable Fixation Distance (75 - 180 mm)

5. Operation

The WENKO Habos Toilet Seat features an integrated Easy-Close automatic lowering mechanism. This function ensures that the toilet lid and seat close gently and silently with a light tap, preventing loud slamming and reducing the risk of pinched fingers or clothing.

6. Maintenance and Cleaning

To maintain the hygiene and appearance of your WENKO Habos Toilet Seat, follow these cleaning guidelines:

  • Regular Cleaning: Clean the seat and lid regularly with a soft cloth and a mild, non-abrasive cleaning agent.
  • Avoid Harsh Chemicals: Do not use chlorine-based cleaners, scouring agents, or abrasive sponges, as these can damage the thermoplastic surface and stainless steel hinges.
  • Easy Removal for Deep Cleaning: The Fix-Clip system allows for quick removal of the entire seat for thorough cleaning of both the seat and the toilet bowl. Simply press the release buttons on the hinges and lift the seat off. Reattach by aligning and pressing down until it clicks.
  • Hinge Care: Ensure the hinges remain dry after cleaning to prevent water spots or corrosion.

7. Troubleshooting

If you encounter any issues with your WENKO Habos Toilet Seat, refer to the following common solutions:

  • Seat is Loose or Wobbly:
    Solution: The Fix-Clip fasteners may not be sufficiently tightened. Remove the seat, re-tighten the fasteners from underneath the toilet bowl, and ensure the rubber inserts are correctly positioned. Reattach the seat.
  • Soft-Close Function Not Working Properly:
    Solution: Check the hinges for any obstructions or damage. Ensure the seat is correctly aligned and fully engaged with the Fix-Clip fasteners. If the issue persists, contact customer support.
  • Seat Swings Too Far Back and Hits the Wall:
    Solution: This can occur if the toilet design allows for excessive backward rotation. Consider installing a small, adhesive bumper or stopper on the wall behind the toilet to prevent direct impact.

8. Specifications

FeatureDetail
Model Number22415100
Material (Seat)Thermoplastic
Material (Fixation)Stainless Steel
Color (Seat)White
Color (Fixation)Matte Silver
Lid Dimensions (L x W)46 cm x 36 cm
Outer Ring Dimensions (L x W)46 cm x 36 cm
Inner Ring Dimensions (L x W)29.5 cm x 22 cm
Fixing Distance7.5 cm - 18 cm
Weight1.69 kg
EAN/UPC04008838140925
Diagram showing outer dimensions of the toilet seat: 460mm length, 360mm width

Figure 4: Outer Dimensions

Diagram showing inner dimensions of the toilet seat: 295mm length, 220mm width

Figure 5: Inner Dimensions

9. Warranty and Support

WENKO provides a 3-year warranty for this product, effective from the date of purchase. This warranty covers all material and manufacturing defects that impair proper functionality. It does not cover damage resulting from incorrect handling or natural wear and tear. Your statutory warranty rights remain unaffected by this guarantee.

In the event of a warranty claim, please return the item, along with your proof of purchase, adequately packaged for transport, to the address below:

Wenko-Wenselaar GmbH & Co. KG
Abteilung « Retouren »
Im Hülsenfeld 17
40721 Hilden, Germany

For further inquiries or support, you may also contact us via email:

Email: service@wenko.de

WENKO 3-Year Guarantee Certificate in multiple languages

Figure 6: WENKO 3-Year Guarantee Certificate

© 2026 WENKO. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.