PUR PPT111W

PUR PLUS 11 Cup Water Pitcher Filtration System User Manual

Model: PPT111W

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your PUR PLUS 11 Cup Water Pitcher Filtration System. Please read it thoroughly before first use to ensure optimal performance and longevity of your product.

PUR PLUS 11 Cup Water Pitcher pouring water into a glass

Image: The PUR PLUS 11 Cup Water Pitcher in use, demonstrating water being poured from the pitcher into a glass.

Product Overview

The PUR PLUS 11 Cup Water Pitcher Filtration System is designed to provide cleaner, great-tasting water by reducing various contaminants. It features an easy-fill lid and a filter change light indicator for convenience.

PUR PLUS 11 Cup Water Pitcher product packaging

Image: The retail packaging for the PUR PLUS 11 Cup Water Pitcher, highlighting key features and certifications.

Key Features:

Diagram showing PUR Pitcher features like LockFit top cap, stay-tight lid, filter change light, dishwasher safe design, and filter life.

Image: An infographic detailing the key features of the PUR PLUS pitcher, including the LockFit™ top cap, stay-tight lid, filter change light, dishwasher-safe design, and filter life.

Setup Instructions

  1. Unpack Components: Carefully remove all parts from the packaging. Ensure you have the pitcher, lid, and one PUR PLUS filter.
  2. Wash Pitcher: Wash the pitcher and lid with mild dish soap and warm water. Rinse thoroughly. The pitcher base is dishwasher safe (top rack only). The lid and filter housing should be hand-washed.
  3. Prepare Filter:
    • Remove the new PUR PLUS filter from its packaging.
    • Submerge the filter in cold water for 15 minutes to remove any loose carbon dust and prepare it for use. This is crucial for optimal performance and to prevent slow filtration.
    • Rinse the filter under cold tap water for 10-15 seconds.
  4. Install Filter: Insert the prepared filter into the filter housing in the pitcher. Twist or push down firmly until it is securely seated. Ensure the filter is properly aligned to prevent leaks and ensure effective filtration.
  5. Fill Pitcher: Fill the top reservoir of the pitcher with cold tap water. The first two full pitchers of filtered water should be discarded or used for watering plants, as they may contain carbon dust.
  6. Activate Filter Change Light: Press and hold the button on the lid for a few seconds until the light flashes, indicating it has been reset.
Comparison of PUR Genuine Filter vs. Generic Filter, highlighting LockFit top cap and filtration process.

Image: An illustration comparing a PUR Genuine Filter with a generic filter, emphasizing the LockFit™ top cap and the internal filtration process of the PUR filter.

Operating Instructions

Using your PUR PLUS Water Pitcher is straightforward:

  1. Filling: Open the easy-fill lid and pour cold tap water into the top reservoir. The water will slowly filter through the PUR filter into the main pitcher chamber. Do not overfill the top reservoir, as this may cause unfiltered water to spill when pouring.
  2. Pouring: Once the water has filtered, you can pour it from the pitcher. The spout is designed to allow filtered water to flow freely.
  3. Filter Change Indicator: The filter change light on the lid will indicate the filter status:
    • Green Light: Filter is working optimally.
    • Yellow Light: Filter is nearing the end of its life and should be replaced soon.
    • Red Light: Filter needs immediate replacement.
Person pouring filtered water from PUR PLUS pitcher into a glass at an outdoor table.

Image: A person pouring filtered water from the PUR PLUS pitcher into a glass, demonstrating typical use in an outdoor setting.

Maintenance

Cleaning the Pitcher:

Filter Replacement:

Replace your PUR PLUS filter every 40 gallons or approximately every 1-2 months, or when the filter change light indicates a red status, whichever comes first. Using genuine PUR filters ensures optimal performance and contaminant reduction.

  1. Remove the old filter from the pitcher.
  2. Prepare the new filter as described in the "Setup Instructions" (submerge and rinse).
  3. Insert the new filter firmly into the filter housing.
  4. Reset the filter change light by pressing and holding the button on the lid until it flashes.

Troubleshooting

ProblemPossible CauseSolution
Slow filtration rate.Filter not properly pre-soaked; air bubbles trapped in filter; filter is clogged or at end of life.Ensure filter is submerged in cold water for 15 minutes before first use. Remove and re-insert filter to release air bubbles. Replace filter if it's old or consistently slow.
Unfiltered water spilling when pouring.Top reservoir overfilled; lid not securely seated.Do not fill water above the MAX fill line in the top reservoir. Ensure the lid is properly aligned and securely closed.
Filter change light not working.Battery depleted (non-replaceable); light not reset after filter change.Press and hold the reset button on the lid. If it still doesn't work, the battery may be depleted. You can manually track filter changes (every 1-2 months).
Water tastes unusual after filter change.Carbon dust from new filter.Discard the first two full pitchers of filtered water after installing a new filter. Ensure the filter was rinsed thoroughly before installation.

Specifications

FeatureDetail
Model NamePPT111W
BrandPUR
Capacity11 Cups
Product Dimensions (L x W x H)11.25" x 6.4" x 10.8"
Item Weight2.25 Pounds
Filter LifeUp to 40 gallons or 1-2 months
CertificationsWQA certified for lead reduction and other contaminants.
Installation TypeCountertop
Dimensions of the PUR PLUS 11 Cup Water Pitcher: 11.4 inches wide, 10.4 inches high, 4.9 inches deep.

Image: A diagram illustrating the dimensions of the PUR PLUS 11 Cup Water Pitcher.

Warranty and Support

For warranty information, product registration, or further assistance, please refer to the official PUR website or contact PUR customer support directly. A digital version of this user manual may also be available for download.

Official User Manual (PDF): Download PDF

Visit the PUR Store for more products and information: PUR Official Store

Related Documents - PPT111W

Preview PUR PLUS Pitcher & Dispenser Owner's Manual - Setup, Care, and Performance Guide
Comprehensive owner's manual for PUR PLUS water filter pitchers and dispensers. Includes setup instructions, product care guidelines, detailed performance data sheets, technical specifications, and warranty information for effective water filtration.
Preview PUR Water Pitcher Quick Start Guide
A quick start guide for setting up and using PUR water pitchers, including filter installation, maintenance, and filter life indicators.
Preview Beautiful by PUR Pitcher Quick Start Guide and Filter Information
A quick start guide for the Beautiful by PUR pitcher (Model PPT120W), detailing setup, filter replacement, and usage tips. Includes information on filter types, capacity, and independent certifications.
Preview PUR Water Filter Performance Data Sheet: NSF/ANSI 42, 53, 401 Certifications
Detailed performance data sheet for PUR water filters, including NSF/ANSI 42, 53, and 401 certifications for reduction of various substances. Covers filter models PPF951K and PPF900Z, listing tested contaminants, their influent concentrations, and reduction percentages against standard requirements.
Preview PUR PFM420W Faucet Mount Water Filter Quick Start Guide
Quick start guide for installing and using the PUR PFM420W Faucet Mount Water Filter. Includes installation steps, filter replacement, and product specifications.
Preview PUR Water Filter Pitcher Quick Start Guide and Information
A comprehensive quick start guide for PUR water filter pitchers, detailing setup, filter replacement, performance specifications, and independent certifications.