Introduction
Thank you for choosing Utilitech LED Puck Lights. This kit is designed to provide efficient and warm illumination for various indoor spaces such as under cabinets, in closets, or on shelves. Featuring a plug-and-play design and a long lifespan, these lights offer a simple and effective lighting solution. This manual provides comprehensive instructions for safe installation, operation, and maintenance of your new LED puck lights.
Image: Three Utilitech LED Puck Lights, showcasing their compact, round design and integrated connecting cables.
Important Safety Information
Please read all instructions carefully before installation and use. Keep this manual for future reference.
- Indoor Use Only: These lights are designed for indoor use in dry locations. Do not expose to water or high humidity.
- Power Source: Use only with the provided power adapter. Ensure the power outlet voltage matches the product's requirements (120 Volts AC).
- Installation: Ensure power is disconnected before installation or maintenance. Do not modify the product or its components.
- Heat: While LED lights produce less heat than traditional bulbs, ensure adequate ventilation around the fixtures.
- Cleaning: Clean only with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Disposal: Dispose of the product according to local regulations for electronic waste.
Package Contents
Verify that all items listed below are included in your package. If any parts are missing or damaged, please contact customer support.
Image: Detailed diagram illustrating the components included in the Utilitech LED Puck Lights kit, including the power cord, puck lights, linking cables, and mounting hardware.
| Item | Description | Quantity |
|---|---|---|
| Power Cord | 72-inch power cord with adapter | 1 |
| LED Puck Light | 3-watt LED puck light (round, black) | 3 |
| Linking Cable | 12-inch quick-connect cables for linking puck lights | 2 |
| Mounting Screws | M3 x 10mm screws for mounting | 6 |
Setup and Installation
Follow these steps to properly install your Utilitech LED Puck Lights. Ensure the power source is disconnected before beginning installation.
Step 1: Plan Your Layout
Determine the desired locations for each puck light. Consider the area you wish to illuminate and the proximity to a power outlet. The linking cables allow for flexible spacing between lights.
Step 2: Mounting the Puck Lights
- Place a puck light at your desired mounting location. The back of the puck light serves as a template for screw placement.
- Using the two keyhole slots on the back of the puck light as a guide, mark the locations for the mounting screws on the surface.
- Drill small pilot holes if necessary, then insert the provided mounting screws (M3 x 10mm) into the marked locations, leaving a small gap between the screw head and the surface.
- Align the keyhole slots on the back of the puck light with the screw heads and slide the light into place, ensuring it is securely fastened.
Image: The reverse side of a Utilitech LED Puck Light, highlighting the keyhole slots used for mounting. This image demonstrates how to use the light itself as a template to mark screw positions on the installation surface.
Step 3: Connecting the Lights
- Connect the puck lights to each other using the provided 12-inch quick-connect linking cables.
- Ensure the connectors are fully inserted and secure. The system is designed for a simple plug-and-play connection.
Image: Two hands demonstrating the quick and easy connection process of two Utilitech LED Puck Lights using their integrated linking cables.
Step 4: Power Connection
- Connect the main power cord to the first puck light in your series.
- Plug the power adapter into a standard 120V AC wall outlet.
Operating Instructions
The Utilitech LED Puck Lights feature a simple plug-and-play operation with an instant-on feature.
Turning On/Off
Once properly installed and connected to a power source, the lights will turn on instantly when power is supplied. To turn the lights off, simply unplug the power adapter from the wall outlet or use a switched outlet if available.
Image: A single Utilitech LED Puck Light emitting its 3000K warm white light, demonstrating its operational appearance.
Maintenance
These LED puck lights require minimal maintenance.
- Cleaning: Ensure the lights are unplugged and cool before cleaning. Wipe the surface gently with a soft, dry, lint-free cloth. Do not use liquid cleaners, sprays, or abrasive materials.
- Bulb Replacement: The LED bulbs are integrated and not user-replaceable. The product has a long lifespan of approximately 25,000 hours.
- Storage: If storing the lights for an extended period, disconnect them from power and store them in a cool, dry place.
Troubleshooting
If you encounter issues with your Utilitech LED Puck Lights, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on. | No power to the outlet. Loose connection. Faulty power adapter. | Check if the outlet is working by plugging in another device. Ensure all quick-connect cables and the power cord are securely plugged in. Contact customer support if the power adapter is suspected to be faulty. |
| Only some lights are working. | Loose connection between puck lights. Damaged linking cable. | Check the connections of the non-working lights and ensure they are fully inserted. Inspect linking cables for any visible damage. Replace if necessary. |
| Lights flicker or dim. | Unstable power supply. Overloaded circuit. | Ensure the power outlet provides stable voltage. Avoid connecting to circuits with high power fluctuations. Do not connect more lights than the system is designed for. |
Specifications
Detailed technical specifications for the Utilitech LED Puck Lights.
| Feature | Detail |
|---|---|
| Brand | Utilitech |
| Model Number | 0709184 |
| Light Source Type | LED |
| Light Color | 3000K Warm White |
| Brightness | 391 Lumens (total for 3-pack) |
| Wattage | 9.3 watts (total for 3-pack) |
| Voltage | 120 Volts AC |
| Dimensions (per puck) | 2.66" Width x 1" Height (2.66 x 2.66 x 1 inches) |
| Lifespan | Approximately 25,000 hours |
| Installation Type | Plug-in, Under Cabinet Mounting |
| Control Method | Plug-in (Instant On) |
| Material | Plastic |
| Certifications | ETL Safety Listing |
Warranty and Support
Utilitech stands behind the quality of its products.
- Customer Guarantee: This product comes with a 100% Customer Usage Guarantee, ensuring satisfaction with your lighting solution.
- Technical Support: For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please refer to the contact information provided on the product packaging or the official Utilitech website.
- Online Resources: Visit the Utilitech website for additional product information, FAQs, and support resources.
