JVC KY-PZ100BU

JVC KY-PZ100BU HD Remote Streaming Camera User Manual

Model: KY-PZ100BU

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your JVC KY-PZ100BU HD Remote Streaming Camera. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

Product Overview

The JVC KY-PZ100BU is a high-definition remote-controlled Pan/Tilt/Zoom (PTZ) camera designed for streaming applications. It features a 1/2.8-inch progressive CMOS sensor capable of capturing 1080p 60fps footage. Key functionalities include:

Front view of the JVC KY-PZ100BU HD Remote Streaming Camera

Figure 1: Front view of the JVC KY-PZ100BU camera, showing the lens and JVC branding.

Rear view of the JVC KY-PZ100BU HD Remote Streaming Camera showing various ports

Figure 2: Rear view of the JVC KY-PZ100BU camera, detailing the MicroSD slot, DC 12V power input, LAN (PoE+) ports, HDMI, Audio In, RS-232C, RS-422, USB, and SDI Out ports.

Setup

  1. Unpacking: Carefully remove the camera and all accessories from the packaging. Verify all components are present.
  2. Mounting: Securely mount the camera in the desired location. Ensure the mounting surface can support the camera's weight and that the camera has an unobstructed view.
  3. Power Connection: Connect the provided DC 12V power adapter to the camera's DC IN port. Alternatively, if using Power over Ethernet (PoE+), connect an Ethernet cable from a PoE+ enabled switch to the LAN (PoE+) port.
  4. Network Connection:
    • Wired: Connect an Ethernet cable from your network router or switch to the camera's LAN port.
    • Wireless (Wi-Fi): Refer to the camera's on-screen menu or web interface for Wi-Fi setup instructions.
  5. Video Output: Connect an HDMI or SDI cable from the camera's respective output port to your display, recorder, or video switcher.
  6. Audio Input: If using an external microphone or audio source, connect it to the 3.5mm Audio In port.
  7. MicroSD Card Insertion: Insert a compatible MicroSD card into the MicroSD slot for local recording. Ensure the card is inserted correctly until it clicks into place.

Operating Instructions

Powering On and Initial Access

Once connected to power, the camera will initiate its startup sequence. Access the camera's settings and live feed via its web interface using a web browser on a networked computer. Refer to the camera's network settings for its IP address or use JVC's provided discovery tools.

Pan, Tilt, and Zoom (PTZ) Control

The camera can be controlled remotely using a compatible JVC PTZ controller or through its web interface. Use the directional controls to pan (horizontal movement) and tilt (vertical movement) the camera. Adjust the zoom level using the zoom controls to achieve the desired field of view. The 30x optical zoom allows for significant magnification without loss of quality.

Setting and Recalling Presets

To save a specific camera position (pan, tilt, zoom, and focus settings):

  1. Manually adjust the camera to the desired position and zoom level.
  2. Access the preset menu on your controller or web interface.
  3. Select an available preset number and save the current position.

To recall a saved preset, simply select the corresponding preset number from the menu.

Recording to MicroSD

Ensure a MicroSD card is inserted. Recording can typically be initiated and stopped via the camera's web interface or a connected controller. Recorded files will be stored on the MicroSD card in MP4 format.

Streaming Configuration

The camera supports various streaming protocols. Access the network and streaming settings in the web interface to configure stream resolution, bitrate, and destination (e.g., RTMP server for live streaming platforms). Consult your streaming service provider for specific settings.

Maintenance

Troubleshooting

ProblemPossible CauseSolution
No powerPower cable disconnected; power outlet faulty; PoE+ not active.Check power cable connection; try a different outlet; ensure PoE+ switch is functioning.
No video outputVideo cable disconnected; incorrect input selected on display; camera not powered on.Verify HDMI/SDI cable connection; select correct input on display; ensure camera is powered.
Cannot access web interfaceIncorrect IP address; network cable issue; firewall blocking access.Verify camera's IP address; check network cable; temporarily disable firewall for testing.
PTZ controls unresponsiveControl cable disconnected; incorrect control protocol selected; camera frozen.Check RS-232C/RS-422 connection; verify protocol settings; power cycle the camera.
MicroSD recording failureMicroSD card full; card not formatted; incompatible card; card error.Delete old files; format card in camera; use a compatible card; try a different card.

Specifications

Model NumberKY-PZ100BU
Video Capture Resolution1080p (60fps)
Optical Zoom30x
Pan Range175° horizontal
Tilt Range-30° to 90° vertical
ConnectivityWi-Fi, Ethernet (LAN PoE+)
Video OutputHDMI, SDI, IP
Audio Input3.5mm TRS stereo mic/line input
StorageMicroSD (MP4 format)
Dimensions (L x W x H)12.35 x 12.2 x 9.9 inches
Weight7.34 pounds
ColorBlack
Control MethodRemote (RS-232C, RS-422, IP)

Warranty and Support

For detailed warranty information and technical support, please refer to the official JVC website or contact JVC customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

JVC Official Website: www.jvc.com

Related Documents - KY-PZ100BU

Preview JVC Camcorder Web API Reference
Comprehensive technical reference for the JVC Camcorder Web API (Version 1.08), detailing commands for controlling JVC camcorders via network, including streaming, PTZ, and system settings.
Preview JVC KY-PZ200/400 PTZ Camera Setup and Firmware Update Guide
Comprehensive guide for setting up JVC KY-PZ200 and KY-PZ400 PTZ cameras, including IP configuration, firmware updates, recommended NDI HX and SRT streaming settings, and image adjustments.
Preview JVC GY-HM200 & GY-LS300 Professional Camcorder Streaming Setup Guide
A comprehensive setup guide for JVC GY-HM200 and GY-LS300 professional camcorders, detailing how to stream live to platforms like Facebook Live, YouTube, and Ustream. Covers network setup, RTMP configuration, bitrate selection, and user button assignment.
Preview JVC KD-AR755 Car Audio Receiver User Manual
Comprehensive user guide for JVC KD-AR755, KD-R750, KD-AR555, KD-R650, KD-R450 car audio receivers. Covers features, operation, USB/iPod/iPhone connectivity, safety, and basic troubleshooting.
Preview JVC KW-V820BT Monitor with DVD Receiver Instruction Manual
This instruction manual provides detailed information for the JVC KW-V820BT Monitor with DVD Receiver. It covers installation, operation, settings, and features such as Apple CarPlay, SiriusXM, Bluetooth, and iPod/iPhone integration for your car audio system.
Preview Connecting JVC GY-HC500 and GY-HM250 Series Cameras to Facebook via RTMPS
This guide provides detailed instructions for connecting JVC GY-HC500 and GY-HM250 series professional camcorders to Facebook for live streaming using the RTMPS protocol. It covers camera-specific settings and Facebook configuration steps.