Moen 82604SRN

Moen Adler 82604SRN 1-Handle Shower Faucet Instruction Manual

Model: 82604SRN

Product Overview

The Moen Adler 82604SRN 1-Handle Shower Faucet is designed for durability and ease of use. This model features a Spot Resist Brushed Nickel finish, which helps to resist fingerprints and water spots, contributing to a cleaner appearance. The showerhead includes self-cleaning nozzles for simplified maintenance. This trim kit is supplied with a Posi-Temp valve for complete installation and complies with Americans with Disabilities Act (ADA) specifications.

Moen Adler 82604SRN 1-Handle Shower Faucet components

Image: The Moen Adler 82604SRN 1-Handle Shower Faucet components, including the showerhead, handle, and escutcheon plate, in a Spot Resist Brushed Nickel finish.

Important Safety Information

Please read all instructions carefully before installation and use. Failure to follow these instructions may result in personal injury or property damage. Always turn off the main water supply before beginning any plumbing work. If you are unsure about any part of the installation process, consult a qualified plumber.

Package Contents

Verify that all components are present before beginning installation:

Setup and Installation

This section provides general guidelines for installing your Moen Adler shower faucet. Specific steps may vary based on your existing plumbing and wall construction. Professional installation is recommended.

  1. Prepare the Installation Area: Turn off the main water supply to your home. Clear the work area and ensure you have all necessary tools and components.
  2. Install the Posi-Temp Valve: Follow the specific instructions provided with the Posi-Temp valve for proper rough-in installation. Ensure the valve is securely mounted and plumb.
  3. Connect Water Lines: Connect the hot and cold water supply lines to the appropriate inlets on the valve. Ensure all connections are watertight.
  4. Install Shower Arm and Showerhead: Apply plumber's tape to the threads of the shower arm. Thread the shower arm into the wall fitting. Attach the showerhead to the shower arm, tightening by hand and then with a wrench if necessary, being careful not to overtighten.
  5. Install Trim Kit: Place the escutcheon plate over the valve body. Secure it according to the valve instructions. Attach the handle to the valve stem, ensuring it operates smoothly.
  6. Test for Leaks: Slowly turn the main water supply back on. Check all connections for leaks. Operate the faucet handle to ensure proper water flow and temperature control.
Installed Moen Adler 82604SRN shower faucet in a bathroom

Image: An installed Moen Adler 82604SRN 1-Handle Shower Faucet with showerhead, demonstrating its appearance in a shower setting.

Operating Instructions

The Moen Adler 82604SRN features a single handle for controlling both water flow and temperature.

Maintenance

Proper care and maintenance will ensure the longevity and appearance of your Moen Adler shower faucet.

Troubleshooting

This section addresses common issues you might encounter with your shower faucet.

ProblemPossible CauseSolution
Low Water FlowMineral buildup in showerhead; partially closed shut-off valve; low household water pressure.Clean showerhead nozzles. Ensure shut-off valves are fully open. Consult a plumber if household water pressure is consistently low.
Water Temperature FluctuationsPosi-Temp valve not functioning correctly; issues with water heater.Verify Posi-Temp valve installation. Check water heater settings and function.
Leaks from Handle/BaseLoose connections; worn O-rings or cartridge.Ensure all connections are tight. If leaks persist, the cartridge or O-rings may need replacement. Contact Moen customer support.

Specifications

Warranty Information

The Moen Adler 82604SRN 1-Handle Shower Faucet is backed by Moen’s Limited Lifetime Warranty. This warranty covers defects in material and manufacturing workmanship for the original consumer purchaser. For full details regarding warranty coverage and claims, please refer to the official Moen warranty documentation or contact Moen customer support.

Customer Support

For technical assistance, replacement parts, or warranty inquiries, please contact Moen customer support. Have your model number (82604SRN) and purchase date available when contacting support.

Moen Customer Service: Please visit the official Moen website for contact information, including phone numbers and online support options.

Related Documents - 82604SRN

Preview Moen Ronan One-Handle Lavatory Faucet Illustrated Parts List & Specifications
Detailed illustrated parts list for the Moen Ronan One-Handle Lavatory Faucet (Models 84021BL, 84021SRN). Find part numbers, descriptions, and finishes for your Moen faucet.
Preview Moen Adler Two Handle Lavatory Faucet Illustrated Parts List
Detailed illustrated parts list for the Moen Adler Two Handle Lavatory Faucet, providing part numbers, descriptions, and finish options for components like handles, cartridges, and mounting hardware. Includes model numbers 84603 and 84603SRN.
Preview Moen Hamden 4" Lavatory Faucet Illustrated Parts
Detailed illustrated parts list for the Moen Hamden 4-inch Lavatory Faucet (Model 84300SRN) in Spot Resist Brushed Nickel. Includes part numbers, descriptions, waste assembly details, and deck thickness compatibility.
Preview Moen Halle 4" Lavatory Faucet Illustrated Parts List
Illustrated parts list for the Moen Halle 4-inch lavatory faucet (Model 84971SRN), detailing components, part numbers, and assembly options for ordering and installation.
Preview Moen Faucet Finish Care and Cleaning Guide
Comprehensive guide to cleaning and maintaining Moen faucet finishes, including LifeShine® and Non-LifeShine® types, with instructions for general cleaning, removing water spots, and warranty information.
Preview Moen GRAEDENT™ Two Handle Centerset Lavatory Faucet Illustrated Parts List
Detailed illustrated parts list for the Moen GRAEDENT™ Two Handle Centerset Lavatory Faucet (Model 84137SRN). Includes part numbers and descriptions for handles, cartridges, gaskets, mounting hardware, aerator kits, and waste assemblies.