Bell+Howell 6254

Bell+Howell Chelsea Cordless LED Table Lamp User Manual

Model: 6254

Introduction

Thank you for choosing the Bell+Howell Chelsea Cordless LED Table Lamp. This manual provides essential information for the safe and efficient operation of your new lamp. Please read these instructions thoroughly before use and retain them for future reference.

Product Overview

The Bell+Howell Chelsea Cordless LED Table Lamp is designed for versatile lighting in various indoor settings. It features touch activation, three distinct light colors, and dimmable brightness, all powered by a rechargeable battery for cordless convenience.

Key Features:

What's in the Box:

Setup

Initial Charge:

Before first use, fully charge the lamp. Connect the provided USB-C cable to the charging port located on the lamp's base and plug the other end into a compatible USB power adapter (not included). The charging indicator light (if present) will show charging status.

Bell+Howell Chelsea Cordless LED Table Lamp with USB-C charging cable

Image: The Bell+Howell Chelsea Cordless LED Table Lamp shown next to its USB-C charging cable. The charging port is visible on the lamp's base.

Operation

Power On/Off and Light Color Selection:

  1. To turn the lamp ON, gently tap the touch sensor located on the top surface of the lamp.
  2. Each subsequent tap will cycle through the three available light colors: Warm, White, and Natural Daylight.
  3. To turn the lamp OFF, continue tapping until the lamp switches off after cycling through all colors.
Hand tapping the top of the Bell+Howell Chelsea Cordless LED Table Lamp to turn it on

Image: A hand demonstrates tapping the top surface of the lamp to activate it. The lamp emits a soft glow.

Bell+Howell Chelsea Cordless LED Table Lamp displaying three different light color temperatures: warm, white, and daylight

Image: A visual representation of the lamp's three light color settings: warm, white, and natural daylight, shown side-by-side.

Adjusting Brightness (Dimming):

To adjust the brightness, tap and hold your finger on the touch sensor. The light will gradually dim or brighten. Release your finger when the desired brightness level is reached. This stepless dimming function works for all three light color modes.

Bell+Howell Chelsea Cordless LED Table Lamp demonstrating dimmable function with a hand touching the top

Image: A hand is shown touching the top of the lamp, illustrating the dimming function. The image depicts the lamp in a dining setting with food.

Maintenance

Cleaning:

To clean the lamp, ensure it is turned off and disconnected from any charging source. Wipe the surface with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish.

Battery Care:

For optimal battery life, avoid fully discharging the lamp frequently. Recharge the lamp when the light output noticeably diminishes. If storing the lamp for an extended period, charge it to approximately 50% every few months to prevent deep discharge.

Troubleshooting

ProblemPossible CauseSolution
Lamp does not turn on.Battery is depleted.Charge the lamp using the provided USB-C cable.
Lamp light is dim or flickers.Low battery.Recharge the lamp.
Touch control is unresponsive.Surface is dirty or wet; internal issue.Ensure the touch surface is clean and dry. If the issue persists after charging, contact customer support.
Lamp does not charge.Faulty cable or power adapter; charging port issue.Try a different USB power adapter and/or cable. Ensure the cable is fully inserted into the charging port.

Specifications

FeatureDetail
BrandBell+Howell
Model Name2 pack (Model 6254)
StyleChelsea Black
Product Dimensions9"D x 4"W x 4"H (approximately 22.86 cm D x 10.16 cm W x 10.16 cm H)
Item Weight2.01 pounds (approximately 0.91 kg)
Light Source TypeLED
Number of Light Sources2 (per lamp, referring to the 2-pack)
Power SourceRechargeable Battery
Control MethodTouch
Special FeaturesCordless, Rechargeable, Dimmable Brightness, 3 Light Colors (Warm, White, Daylight)
MaterialAcrylonitrile Butadiene Styrene (Base and Shade)
Indoor/Outdoor UsageIndoor
UPC080313062544

Safety Information

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact Bell+Howell customer service directly. A lifetime warranty is mentioned in one of the reviews, but it's best to verify with the manufacturer for current terms.

Manufacturer: E Mishan & Sons

For further assistance, visit the official Bell+Howell store: Bell+Howell Store on Amazon

Related Documents - 6254

PreviewBell+Howell Crystal Acrylic Lamp - The Quartz (Model 2718) - User Guide
Detailed instructions and specifications for the Bell+Howell Crystal Acrylic Lamp - The Quartz (Model 2718). Learn how to charge, use touch controls, operate the remote, and explore its features including 16 color changing modes and adjustable brightness.
PreviewBell+Howell Bionic Rechargeable Work Light Beam User Manual
User manual and specifications for the Bell+Howell Bionic Rechargeable Work Light Beam, featuring 1000 lumens, multidirectional LEDs, magnetic base, and a swiveling hook.
PreviewBell Portable Battery Table Lamp - Quick Start Guide
Get started with your Elega Light Bell Portable Battery Table Lamp. This guide covers unboxing and bulb installation for quick setup.
PreviewChelsea Boston Series Clocks and Barometers: Operation, Care, Service, and Warranty
Comprehensive guide to operating, caring for, and servicing Chelsea's Boston Series striking and non-striking clocks, quartz clocks, tide clocks, and barometers. Includes warranty information and the ship's bell code.
PreviewEichholtz Bell Rive Dining Table Assembly Instructions
Step-by-step assembly instructions for the Eichholtz Bell Rive dining table, including important attention points, care advice, and manufacturer contact information.