ROBOTIME Walking T-Rex Dinosaur 3D Wooden Puzzle: Instruction Manual

1. Introduction

Thank you for choosing the ROBOTIME Walking T-Rex Dinosaur 3D Wooden Craft Kit Puzzle. This kit allows you to construct a detailed wooden model of a T-Rex that responds to sound with walking and roaring actions. This manual provides essential information for assembly, operation, and maintenance to ensure a successful and enjoyable experience.

2. Product Features

• Sound-Activated Movement: The assembled T-Rex model walks and roars in response to sound.
• 3D Wooden Puzzle: Construct a detailed T-Rex model from pre-cut wooden pieces.
• Educational Craft Kit: Enhances creativity and practical ability through hands-on assembly.
• Interactive Design: Provides an engaging experience once assembled.

3. Package Contents

Please verify that all components are present before beginning assembly.

• Wooden Puzzle Sheets (pre-cut pieces)
• Motor Unit
• Instruction Manual

4. Assembly Instructions

Follow these steps carefully to assemble your T-Rex model. Handle wooden pieces gently to prevent breakage.

1. Prepare Pieces: Carefully detach all wooden pieces from their sheets. Use sandpaper if necessary to smooth any rough edges.
2. Identify Components: Refer to the diagrams in the included manual to identify each piece by its number.
3. Assemble Core Body: Begin by constructing the central body structure, ensuring all interlocking tabs fit securely.
4. Integrate Motor: Install the motor unit into the designated compartment within the body. Ensure wires are routed correctly and connections are secure.
5. Attach Limbs: Assemble and attach the legs, arms, and tail, paying close attention to the orientation of moving joints.
6. Construct Head: Assemble the head and jaw components, ensuring the jaw can move freely if designed to do so.
7. Final Connections: Connect any remaining pieces and ensure all parts are firmly in place. Do not force pieces together.

5. Initial Setup

After assembly, the T-Rex requires batteries for operation.

1. Battery Compartment: Locate the battery compartment on the T-Rex model, typically on its back or underside.
2. Insert Batteries: Insert the required number of AAA batteries (not included) according to the polarity indicators (+/-).
3. Close Compartment: Securely close the battery compartment cover.

6. Operating Instructions

The ROBOTIME Walking T-Rex is designed for sound-activated interaction.

1. Power On: Locate the power switch, usually near the battery compartment, and switch it to the 'ON' position.
2. Sound Activation: Make a distinct sound, such as a clap or a loud voice, near the T-Rex. The model will respond by walking and emitting a roaring sound.
3. Observe Movement: The T-Rex will typically walk a short distance and roar before pausing, awaiting the next sound input.
4. Power Off: When not in use, switch the power to 'OFF' to conserve battery life.

7. Maintenance

Proper care will extend the life of your wooden T-Rex model.

• Cleaning: Wipe the model gently with a dry, soft cloth. Avoid using water or cleaning solutions, as they can damage the wood.
• Storage: Store the model in a dry environment away from direct sunlight and extreme temperatures to prevent warping or fading of the wood.
• Battery Care: Remove batteries if the product will not be used for an extended period to prevent leakage.
• Handling: Avoid dropping or applying excessive force to the model, as wooden pieces can break.

8. Troubleshooting

If you encounter issues with your T-Rex model, refer to the following common solutions:

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ROBOTIME website. Keep your proof of purchase for any warranty claims.