1. Introduction
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Neumann KH 80 DSP 4 Inches Powered Studio Monitor. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
2. Product Overview
The Neumann KH 80 DSP is a high-quality 4-inch powered studio monitor designed for accurate audio reproduction in nearfield applications. It features advanced Digital Signal Processing (DSP) for precise acoustic control and bi-amplification technology for efficient power delivery to its drivers.
Key Features:
- DSP-controlled bi-amplification for optimized performance.
- Mathematically Modeled Dispersion (MMD) waveguide for wide sweet spot.
- 4-inch composite-sandwich woofer and 1-inch titanium-fabric dome tweeter.
- Network controllable via a dedicated application (iOS only).
- Compact design suitable for various studio environments.
Figure 2.1: Front view of the Neumann KH 80 DSP Studio Monitor.
Figure 2.2: Close-up view of the Neumann KH 80 DSP woofer and logo.
3. Setup
3.1 Unpacking
Carefully remove the monitor from its packaging. Retain all packaging materials for future transport or storage.
3.2 Placement
Position the monitors in your listening environment. For nearfield monitoring, place them at an equilateral triangle with your listening position, with the tweeters at ear height. Ensure adequate space around the monitors for proper heat dissipation and acoustic performance.
Figure 3.1: Example of Neumann KH 80 DSP monitors in a studio setup.
3.3 Connections
- Connect your audio source (e.g., audio interface, mixer) to the monitor's input using a balanced XLR or 1/4-inch TRS cable. The KH 80 DSP features a combo jack for input.
- Connect the power cable to the monitor and then to a suitable power outlet.
3.4 DSP Control Application
The KH 80 DSP monitors can be controlled and calibrated using a dedicated application. This application is currently available for iOS devices only. Download the Neumann Control app from the Apple App Store to access advanced features such as room correction and equalization.
4. Operating Instructions
4.1 Powering On/Off
Ensure all connections are secure before powering on. Use the power switch located on the rear panel of the monitor to turn it on or off. The monitor may have an automatic standby feature.
4.2 Volume Control
Adjust the input sensitivity or volume directly from your audio source. The KH 80 DSP does not feature an external volume knob. Fine-tuning of levels can be done via the Neumann Control app.
4.3 Using the Neumann Control App
Once the app is installed on your iOS device and connected to the same network as your monitors, you can:
- Perform guided room calibration to optimize frequency response for your listening environment.
- Adjust individual monitor settings, including input gain, output level, and various acoustic parameters.
- Create and recall custom equalization presets.
Note: The control application is exclusively for iOS devices. Android support is not available.
5. Maintenance
5.1 Cleaning
To clean the monitor, use a soft, dry cloth. Do not use liquid cleaners, aerosols, or solvents, as these may damage the cabinet or electronic components. Ensure the monitor is powered off and disconnected from the power source before cleaning.
5.2 Storage
If storing the monitor for an extended period, place it back in its original packaging to protect it from dust and physical damage. Store in a cool, dry environment.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No sound output |
|
|
| Distorted sound |
|
|
| Neumann Control app cannot find monitors |
|
|
| Standby function issues |
|
|
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | KH 80 DSP |
| Speaker Type | Monitor |
| Woofer Diameter | 4 Inches |
| Tweeter Diameter | 1 Inch (Titanium-fabric dome) |
| Power Source | Corded Electric |
| Speaker Maximum Output Power | 25 Watts |
| Frequency Response | 57 Hz - 21 kHz (typical range, app-adjustable) |
| Connectivity Technology | Combo Jack (XLR/TRS) |
| Control Method | App (iOS only) |
| Product Dimensions (D x W x H) | 13.75"D x 11.25"W x 9.5"H |
| Item Weight | 9.15 Pounds |
| ASIN | B06VTFL9Q6 |
| Item Model Number | 506835 |
| UPC | 615104271012 |
Figure 7.1: Neumann KH 80 DSP Studio Monitor with indicated dimensions.
8. Warranty and Support
8.1 Warranty Information
The Neumann KH 80 DSP Studio Monitor comes with a Limited Warranty (2 years). Please refer to the official Neumann website or your purchase documentation for full warranty terms and conditions.
8.2 Customer Support
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact Neumann customer support through their official website or authorized service centers. Keep your proof of purchase handy when contacting support.
