Lightolier Soli Surface Mounted ADA Decorative Wall Sconce

Introduction

Thank you for choosing the Lightolier Soli Surface Mounted ADA Decorative Wall Sconce. This manual provides important information regarding the installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and keep it for future reference.

This wall sconce features a metallic aluminum finish and is designed for surface mounting. It operates on 120/277V and is compatible with (1) 32-42 Watt Triple Tube or (1-2) 13/18/26W Quad Tube lamps. Its modern style and ADA compliance make it suitable for various indoor applications.

Figure 1: Front view of the Lightolier Soli Wall Sconce, showcasing its sleek, metallic aluminum design.

Safety Information

WARNING: Risk of Electric Shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.

• All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
• Do not install this fixture in wet or damp locations. This fixture is designed for indoor, dry location use only.
• Ensure the mounting surface can support the weight of the fixture.
• Do not exceed the specified wattage for the lamps. Refer to the specifications section for compatible lamp types and wattages.
• Handle lamps with care. Avoid touching lamps with bare hands as oils can reduce lamp life.
• Keep packaging materials away from children.

Package Contents

Carefully unpack your wall sconce and ensure all components are present and undamaged. If any parts are missing or damaged, do not attempt to install the fixture. Contact Lightolier customer support immediately.

• Lightolier Soli Wall Sconce Unit (Model: 48020ALUDA)
• Mounting Hardware (screws, wire nuts, etc.)
• Instruction Manual (this document)
• Lamps (bulbs) are typically sold separately unless specified on packaging.

Setup and Installation

Follow these steps carefully to install your Lightolier Soli Wall Sconce. Professional installation is recommended if you are not experienced with electrical wiring.

1. Turn Off Power: Before beginning installation, ensure the power to the circuit at the circuit breaker or fuse box is completely turned off. Verify with a voltage tester.
2. Prepare Mounting Location: Identify the desired location on the wall. The fixture is designed for surface mounting. Ensure there is a suitable electrical junction box for wiring connections.
3. Attach Mounting Bracket: Secure the fixture's mounting bracket to the electrical junction box using the provided screws. Ensure it is firmly attached and level.
4. Make Electrical Connections:
   • Connect the black wire from the fixture to the black (hot) wire from the junction box.
   • Connect the white wire from the fixture to the white (neutral) wire from the junction box.
   • Connect the green or bare copper ground wire from the fixture to the ground wire from the junction box.
   • Secure all connections with wire nuts and wrap with electrical tape for added safety.
   

   Figure 2: Rear view of the sconce, illustrating the wiring compartment and mounting points for installation.

5. Secure Fixture: Carefully tuck all wires into the junction box. Align the fixture with the mounting bracket and secure it in place using the provided screws. Ensure the fixture is flush against the wall.
6. Install Lamp(s): Insert the appropriate lamp(s) (e.g., 32-42 Watt Triple Tube or 13/18/26W Quad Tube) into the fixture's sockets. Refer to the fixture's internal labeling for exact lamp requirements.
7. Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box.

Operating Instructions

The Lightolier Soli Wall Sconce is designed for simple operation once installed.

1. Power On: Ensure the wall switch connected to the fixture is in the "ON" position.
2. Remote Control (if applicable): This model supports remote control. If a remote control system is integrated with your electrical setup, use the remote to turn the light on/off or adjust settings as per your remote system's instructions.

Figure 3: Angled view of the sconce, highlighting its decorative design and metallic finish.

Maintenance

Regular maintenance will help preserve the appearance and functionality of your wall sconce.

• Cleaning: To clean the fixture, first ensure power is off. Use a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Lamp Replacement:
  1. Turn off power to the fixture at the circuit breaker.
  2. Allow the lamp to cool completely if it has been recently in use.
  3. Carefully remove the old lamp according to the lamp manufacturer's instructions.
  4. Insert the new, correct wattage and type lamp.
  5. Restore power.

Troubleshooting

If you encounter issues with your wall sconce, refer to the following common problems and solutions:

If the problem persists after trying these solutions, contact a qualified electrician or Lightolier customer support.

Specifications

Warranty and Support

Lightolier products are manufactured to the highest quality standards and are backed by a manufacturer's warranty. Specific warranty terms and conditions may vary. Please refer to the warranty card included with your purchase or visit the official Lightolier website for detailed warranty information.

For technical support, replacement parts, or any questions regarding your Lightolier Soli Wall Sconce, please contact Lightolier customer service. Contact information can typically be found on the product packaging or the official Lightolier website.

Website: www.lightolier.com (Note: This is a placeholder URL, please refer to official documentation for actual website.)