Introduction
This manual provides essential information for the safe and efficient use of your Feit Electric T7 LED Light Bulb, model BPT7N/SU/LED. This energy-saving LED bulb is designed for various applications, including refrigerators, appliances, and indicator lights. Please read these instructions carefully before installation and operation.
Image: Packaging for the Feit Electric T7 LED Light Bulb, highlighting its features such as 15W equivalent, 1.5W actual usage, 80 lumens, E17 intermediate base, warm white 3000K, non-dimmable, and 120V compatibility.
Safety Information
Always follow basic safety precautions when installing or replacing light bulbs to reduce the risk of fire, electric shock, and personal injury.
- Turn off power: Before installing or removing the bulb, ensure the power to the fixture is turned off at the circuit breaker or fuse box.
- Suitable for dry locations: This bulb is intended for indoor use in dry locations.
- Non-Dimmable: This bulb is non-dimmable. Do not use with dimmers, as this may damage the bulb or the dimmer.
- Correct Base: Ensure the fixture has an E17 Intermediate Base to match the bulb.
- Avoid contact with water: Do not expose the bulb to water or moisture.
- Operating Temperature: Suitable for operation in temperatures ranging from -20°C to +40°C (-4°F to +104°F).
Setup and Installation
Follow these steps to properly install your Feit Electric T7 LED Light Bulb:
- Verify Power Off: Confirm that the power to the light fixture is completely off at the main power source (e.g., circuit breaker).
- Remove Old Bulb: Carefully unscrew the existing bulb from the fixture. Allow it to cool if it was recently in use.
- Inspect Fixture: Check the fixture's socket to ensure it is clean and free of debris. Confirm it is an E17 Intermediate Base.
- Install New Bulb: Gently screw the Feit Electric T7 LED bulb into the E17 Intermediate Base socket until it is snug. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker.
- Test: Activate the light switch to ensure the bulb illuminates.
Image: A detailed view of the Feit Electric T7 LED bulb, highlighting its E17 intermediate screw base, which is crucial for proper installation in compatible fixtures.
Operating Instructions
The Feit Electric T7 LED Light Bulb operates like a standard incandescent bulb once installed:
- Power On/Off: Use the existing light switch or appliance control to turn the bulb on or off.
- Instant On: The bulb provides instant full brightness upon activation, with no warm-up time.
- Non-Dimmable: This bulb is designed for on/off operation only and is not compatible with dimmer switches.
Image: The Feit Electric T7 LED bulb installed and illuminating the interior of an oven, demonstrating its use in appliances.
Image: A collage illustrating the versatility of the T7 LED bulb, showing it in a refrigerator, under kitchen cabinets, inside a microwave, and as part of a lighted sign.
Maintenance
The Feit Electric T7 LED Light Bulb requires minimal maintenance due to its long lifespan and durable design.
- Cleaning: Ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth if necessary. Do not use liquid cleaners.
- Lifespan: This LED bulb has an average rated life of 15,000 hours, or approximately 13.7 years based on 3 hours of daily use. Replacement is typically only needed after this extended period.
- Disposal: Dispose of the bulb according to local regulations for electronic waste. This bulb is 100% mercury-free.
Image: A visual representation emphasizing the bulb's longevity (15,000 hours) and low annual energy cost ($0.18), demonstrating its economical and durable nature.
Troubleshooting
If your Feit Electric T7 LED Light Bulb is not functioning as expected, consider the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. |
|
|
| Bulb flickers or dims. |
|
|
Specifications
Key technical specifications for the Feit Electric T7 LED Light Bulb (Model BPT7N/SU/LED):
| Specification | Value |
|---|---|
| Model Number | BPT7N/SU/LED |
| Light Type | LED |
| Bulb Shape Size | T7 |
| Bulb Base | E17 Intermediate |
| Wattage | 1.5 Watts |
| Incandescent Equivalent | 15 Watts |
| Brightness | 80 Lumens |
| Light Color | Warm White |
| Color Temperature | 3000 Kelvin |
| Voltage | 120 Volts |
| Special Feature | Instant On, Non-Dimmable |
| Average Life | 15,000 Hours (13.7 Years) |
| Material | Plastic |
| Product Dimensions | 0.9"W x 2"H |
| Item Weight | 0.5 Ounces |
| Certifications | UL Listed, FCC Compliant, RoHS Compliant |
Image: A diagram illustrating the physical dimensions (0.9 inches width, 2 inches height) and key electrical specifications of a similar LED bulb, including 80 Lumens brightness, 1.5W wattage, 13.7 years lifetime, and E17 base type. Note: The image text mentions T6 E12, but the product is T7 E17; refer to the table above for accurate product specifications.
Warranty and Support
Warranty: The provided product information indicates "Warranty Description: Na." Please refer to the retailer or Feit Electric's official website for the most current warranty details, if any apply.
Customer Support: For further assistance, technical support, or inquiries regarding your Feit Electric T7 LED Light Bulb, please visit the official Feit Electric website or contact their customer service department.
You can visit the Feit Electric Store on Amazon for more information: Feit Electric Store
