BEMKO B62-TSED1 TS SCHUKO Timer Instruction Manual

1. Introduction

This manual provides detailed instructions for the proper use and maintenance of your BEMKO B62-TSED1 TS SCHUKO Timer. This electronic weekly timer is designed to control electrical appliances by switching them ON and OFF at pre-set times. It features an electronic weekly program, a 1.5-inch LCD display, and supports up to 8 programs per day. Please read this manual thoroughly before operating the device.

2. Product Overview

The BEMKO B62-TSED1 is a compact digital timer with a built-in SCHUKO socket. It allows for precise control over connected devices.

An image showing the white BEMKO B62-TSED1 digital timer. It features an LCD screen at the top, below which are control buttons labeled WEEK, HOUR, MINUTE, RES/RCL, CLOCK, TIMER, ON/AUTO/OFF, and RANDOM. The lower part of the device integrates a Schuko type electrical socket.

2.1. Components

• LCD Display: Shows current time, day, and program status.
• Control Buttons:
• WEEK: Sets the day of the week.
• HOUR: Sets the hour.
• MINUTE: Sets the minute.
• RES/RCL: Resets the device or recalls programs.
• CLOCK: Used to set the current time and exit programming mode.
• TIMER: Enters program setting mode.
• ON/AUTO/OFF: Manually switches the output ON, OFF, or sets it to automatic mode.
• RANDOM: Activates or deactivates the random function.
• SCHUKO Socket: For connecting an appliance.
• LED Indicator: Informs about the timer's status.

3. Setup

3.1. Initial Power-Up and Reset

1. Plug the timer into a standard 230V AC wall socket.
2. The LCD display will illuminate. If the display is blank or shows erratic characters, press the RES/RCL button with a pointed object (e.g., a pen tip) to reset the device. This will clear all previous settings.

3.2. Setting Current Time and Day

1. Press and hold the CLOCK button.
2. While holding CLOCK, press the WEEK button repeatedly to set the current day of the week (e.g., MO, TU, WE, TH, FR, SA, SU).
3. While holding CLOCK, press the HOUR button repeatedly to set the current hour (0-23).
4. While holding CLOCK, press the MINUTE button repeatedly to set the current minute (0-59).
5. Release the CLOCK button. The current time and day are now set.

4. Operating Instructions

4.1. Programming ON/OFF Times

The timer allows for up to 8 ON/OFF programs per day. Each program consists of an ON time and an OFF time.

1. Press the TIMER button once to enter program setting mode. The display will show '1 ON'.
2. Press WEEK to select the desired day(s) for this program. Options include individual days, blocks of days (e.g., MO-FR, SA-SU, MO-SA), or all days (MO-SU).
3. Press HOUR to set the desired ON hour.
4. Press MINUTE to set the desired ON minute.
5. Press TIMER again. The display will show '1 OFF'.
6. Repeat steps 3 and 4 to set the desired OFF hour and minute for program 1.
7. Press TIMER again to move to the next program ('2 ON') or to review existing programs.
8. Repeat the process for up to 8 ON/OFF programs.
9. To exit program setting mode and return to the current time display, press the CLOCK button.

4.2. Manual Override (ON/AUTO/OFF)

Press the ON/AUTO/OFF button to cycle through the following modes:

• ON: The connected appliance is continuously ON, overriding all programs.
• OFF: The connected appliance is continuously OFF, overriding all programs.
• AUTO: The timer operates according to the programmed ON/OFF times. This is the standard operating mode for automatic control.

4.3. Random Function

The random function is useful for security purposes, making it appear as if someone is home. When activated, the timer will randomly switch the connected appliance ON and OFF within a specific time window.

1. Press the RANDOM button to activate the random function. 'RANDOM' will appear on the display.
2. Press RANDOM again to deactivate it.

5. Maintenance

5.1. Cleaning

To clean the timer, disconnect it from the power outlet. Use a soft, dry cloth to wipe the surface. Do not use abrasive cleaners, solvents, or immerse the device in water.

5.2. Environmental Considerations

The BEMKO B62-TSED1 has an IP20 protection rating, meaning it is protected against solid objects larger than 12.5mm but has no protection against water. Use the device indoors in dry conditions only. Avoid exposure to moisture, dust, and extreme temperatures.

6. Troubleshooting

6.1. Common Issues and Solutions

• Display is blank or erratic: The internal battery might be low or the device needs a reset. Press the RES/RCL button with a pointed object. Ensure the timer is plugged into a live power outlet.
• Programs are not executing: Ensure the timer is in AUTO mode (check the display for 'AUTO'). Verify that the current time and day are set correctly. Recheck your programmed ON/OFF times for accuracy.
• Appliance does not turn ON/OFF: Check if the appliance itself is working by plugging it directly into a wall socket. Ensure the timer is receiving power.
• LED indicator not lit: The LED indicates the status of the timer. If it's not lit when the appliance should be ON, check power supply and timer mode.

If problems persist after attempting these solutions, contact customer support.

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact BEMKO customer service directly. Specific warranty terms and support channels may vary by region.