1. Introduction
Thank you for choosing the Mount-It! Mobile TV Stand, Model MI-879. This stand is designed to provide a versatile and portable solution for mounting flat panel LCD/LED screens ranging from 13 to 42 inches. Its robust construction and adjustable features make it suitable for various environments, including homes, offices, schools, and trade shows. This manual provides essential information for safe installation, operation, and maintenance of your TV stand.
Figure 1: Mount-It! Mobile TV Stand with a television mounted.
2. Safety Information
Please read all instructions carefully before assembly and use. Failure to follow these instructions may result in property damage, serious injury, or death. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Weight Capacity: Do not exceed the maximum weight capacity of 44 lbs (20 kg).
- Screen Size: This stand is designed for screens between 13 and 42 inches.
- VESA Compatibility: Ensure your TV's VESA mounting pattern is compatible (up to 200x200mm).
- Stability: Always ensure the stand is on a level surface. Lock the wheels when the stand is stationary to prevent accidental movement.
- Assembly: Assemble the product exactly as described in this manual. Do not modify the structure or use parts not supplied by the manufacturer.
- Children: Keep children away from the assembly area. Small parts may be a choking hazard.
3. Package Contents
Verify that all components are present and undamaged before beginning assembly. If any parts are missing or defective, contact Mount-It! customer service.
Figure 2: Key components of the Mount-It! Mobile TV Stand.
The package should include:
- Base Assembly (with pre-attached casters)
- Telescopic Pole
- TV Mounting Plate (VESA compatible)
- Hardware Kit (screws, washers, spacers for TV mounting)
- Tools (e.g., Allen wrench, spanner)
4. Setup Instructions
Follow these steps to assemble your mobile TV stand.
4.1 Assemble the Base
- Unpack the base components. The wide 18" x 20" base features four swiveling wheels.
- Ensure the two locking casters are in the unlocked position during assembly.
Figure 3: Detail of the stand's base with locking wheels.
4.2 Attach the Telescopic Pole
- Insert the bottom section of the telescopic pole into the central opening of the base.
- Secure the pole to the base using the provided bolts and tools. Ensure it is firmly tightened for stability.
4.3 Install the TV Mounting Plate
- Attach the VESA compatible TV mounting plate to the top section of the telescopic pole.
- Use the provided screws and nuts to secure the mounting plate.
Figure 4: VESA mounting plate attachment.
4.4 Mount Your Television
- Before mounting, identify the VESA pattern on the back of your TV. Refer to Figure 5 for common VESA patterns.
- Select the appropriate screws, washers, and spacers from the hardware kit that match your TV's VESA holes.
- Carefully attach the TV to the mounting plate. It is recommended to have assistance when lifting and positioning the TV.
- Ensure all screws are securely tightened, but do not overtighten.
Figure 5: VESA mounting patterns supported.
5. Operating Instructions
This section details how to use the adjustable features of your mobile TV stand.
5.1 Adjusting Height
The telescopic pole allows for height adjustment. To adjust the height:
- Loosen the height adjustment knob or lever on the telescopic pole.
- Carefully raise or lower the TV to the desired viewing height. The maximum stand height (center of TV) is 52 inches, with a minimum height of 36 inches.
- Once the desired height is reached, securely tighten the adjustment knob/lever to lock the pole in place.
Figure 6: Height adjustment and dimensions.
5.2 Adjusting Tilt Angle
The TV bracket allows for a downward tilt of up to 30 degrees for optimal viewing angles.
- Locate the tilt adjustment mechanism on the TV mounting plate.
- Loosen the tilt knobs or bolts.
- Adjust the screen to the desired downward angle.
- Securely tighten the tilt knobs/bolts to fix the angle.
Figure 7: Television tilt adjustment.
5.3 Moving the Stand
The stand is equipped with four swiveling wheels for easy mobility.
- To Move: Ensure the two locking casters are in the unlocked position. Gently push the stand to its new location.
- To Secure: Once the stand is in the desired position, press down on the levers of the two locking casters to engage the brakes. This will prevent unintended movement.
Figure 8: Mobile TV Stand ready for use.
6. Maintenance
Regular maintenance ensures the longevity and safe operation of your TV stand.
- Cleaning: Wipe the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the finish.
- Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary.
- Caster Inspection: Inspect the wheels for any debris or damage that might impede smooth movement. Clean or replace as needed.
- Weight Limit: Do not place items on the stand that exceed its stated weight capacity.
7. Troubleshooting
If you encounter issues with your Mount-It! Mobile TV Stand, refer to the following common problems and solutions.
7.1 Stand is Unstable
- Check Assembly: Ensure all bolts and screws are securely tightened, especially those connecting the pole to the base and the mounting plate to the pole.
- Level Surface: Verify that the stand is placed on a flat, level surface.
- Weight Distribution: Ensure the TV is centered on the mounting plate and its weight does not exceed the stand's capacity.
7.2 Difficulty Adjusting Height/Tilt
- Loosen Fasteners: Ensure the height adjustment knob/lever and tilt adjustment knobs/bolts are sufficiently loosened before attempting to adjust.
- Obstructions: Check for any obstructions or debris in the adjustment mechanisms.
7.3 Wheels Not Rolling Smoothly or Locking
- Clear Debris: Remove any hair, dust, or debris that may be caught in the casters.
- Lubrication: A small amount of silicone spray can improve wheel movement if they are stiff.
- Locking Mechanism: Ensure the locking levers are fully engaged or disengaged.
8. Specifications
Detailed technical specifications for the Mount-It! Mobile TV Stand MI-879.
| Feature | Specification |
|---|---|
| Model Number | MI-879 |
| Material | Alloy Steel (Cold Rolled Steel Construction) |
| Color | Black |
| Compatible TV Sizes | 13" - 42" Flat Panel LCD LED Screens |
| Weight Capacity | Up to 44 lbs (20 kg) |
| VESA Compatibility | Up to 200x200mm (e.g., 75x75, 100x100, 200x100, 200x200) |
| Height Adjustment | Telescopic, Max 52" (center of TV), Min 36" |
| Tilt Angle | 30 degrees downward |
| Base Dimensions | 18" x 20" |
| Mobility | 4 Swiveling Wheels, 2 Locking Casters |
| Item Weight | Approximately 0.01 ounces (product data indicates this, actual shipping weight will be higher) |
| UPC | 713012040154 |
9. Warranty & Support
Mount-It! products are designed for durability and performance. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official Mount-It! website.
If you require technical assistance, have questions about assembly, or need to report missing/damaged parts, please contact Mount-It! customer support. Contact details can typically be found on the product packaging or the brand's official website.
Online Resources: For additional support, FAQs, and product registration, please visit the Mount-It! Brand Store on Amazon.
