Roca Logica-N Built-in Mixer Tap User Manual

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Roca Logica-N Built-in Mixer Tap. Designed for both bathtubs and showers, this single-lever mixer combines timeless design with efficiency and functionality, making it a perfect addition to modern bathroom spaces. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

Image: Front view of the Roca Logica-N Built-in Mixer Tap, featuring a chrome finish, a circular wall plate, and a single lever handle.

Safety Information

• Always turn off the main water supply before beginning any installation or maintenance work.
• If you are unsure about any part of the installation process, consult a qualified plumber.
• Wear appropriate personal protective equipment (PPE) such as gloves and eye protection during installation.
• Ensure all connections are secure and watertight to prevent leaks.
• Do not use abrasive cleaners or harsh chemicals on the chrome finish, as this can cause damage.

Package Contents

Verify that all components are present before beginning installation:

• 1 x Roca Logica-N Built-in Mixer Tap unit (Model A5A0B27C00)
• Installation hardware (screws, seals, etc. - specific items may vary, refer to packaging)
• Instruction manual (this document)

Note: This mixer tap requires a separate Rocabox 525869403 for complete installation, which is not included with this product and must be purchased separately.

Installation Guide

This section outlines the steps for installing your Roca Logica-N Built-in Mixer Tap. This is a wall-mounted, built-in installation and requires careful attention to plumbing and wall preparation. It is recommended to have this installed by a professional plumber.

Tools and Materials Required (Not Included):

• Rocabox 525869403 (essential for installation)
• Adjustable wrench
• Screwdriver (Phillips/Flathead as needed)
• Measuring tape
• Level
• Drill with appropriate bits
• Sealant/Teflon tape
• Pipe cutter (if modifying existing plumbing)

Installation Steps:

1. Prepare the Installation Area:

   Ensure the main water supply to the bathroom is turned off. Identify the desired location for the mixer tap on the wall. This unit is designed for built-in installation, meaning the main body will be concealed within the wall.

2. Install the Rocabox (Sold Separately):

   The Roca Logica-N mixer tap requires the Rocabox 525869403 for its concealed installation. Follow the specific instructions provided with the Rocabox for its proper mounting and connection to your hot and cold water lines within the wall cavity. Ensure the Rocabox is securely fixed and level.

3. Connect the Mixer Tap to the Rocabox:

   Once the Rocabox is installed, carefully connect the mixer tap unit to the designated outlets on the Rocabox. Ensure all connections are tight and sealed using appropriate plumbing tape or sealant to prevent leaks. The mixer tap unit will typically slide into or attach to the Rocabox from the front.

4. Secure the Faceplate/Escutcheon:

   Position the decorative faceplate (escutcheon) over the installed mixer unit, aligning it with the mounting points. Secure the faceplate to the wall or the Rocabox using the provided screws. Ensure it is flush against the wall and covers the opening neatly.

5. Install the Handle:

   Attach the single lever handle to the mixer spindle. Typically, this involves pushing the handle onto the spindle and securing it with a small set screw, often located on the underside of the handle. Cover the set screw with the decorative cap if provided.

6. Test for Leaks and Functionality:

   Slowly turn the main water supply back on. Check all connections for any signs of leaks. Operate the mixer handle to test the flow of hot and cold water and ensure proper mixing. Adjust water temperature and flow as needed.

Operating Instructions

The Roca Logica-N mixer tap features a single lever for controlling both water flow and temperature.

• Water Flow Control:

  To turn the water on, lift the lever upwards. The further you lift it, the greater the water flow. To turn the water off, push the lever downwards until it is in the closed position.

• Temperature Control:

  To adjust the water temperature, move the lever horizontally. Moving the lever to the left typically increases the hot water proportion, while moving it to the right increases the cold water proportion. Find your desired temperature by adjusting the lever's horizontal position.

Maintenance and Care

Proper care will ensure the longevity and appearance of your Roca Logica-N mixer tap.

• Cleaning:

  Clean the chrome finish regularly with a soft cloth and mild soap and water. Rinse thoroughly with clean water and dry immediately to prevent water spots. Do not use abrasive sponges, scouring pads, or harsh chemical cleaners (e.g., bleach, ammonia-based products, or acidic cleaners) as these can damage the chrome finish.

• Hard Water Areas:

  In areas with hard water, limescale deposits may build up. Use a descaling solution specifically designed for bathroom fixtures, following the product's instructions carefully. Ensure the solution does not remain on the surface for too long and rinse thoroughly.

• Leak Prevention:

  Periodically check for any signs of leaks around the base of the tap or connections. Address any leaks promptly to prevent water damage.

Troubleshooting

If the problem persists after attempting these solutions, please contact Roca customer support or a qualified plumber.

Technical Specifications

Warranty and Support

Roca products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Roca website. For technical support, spare parts, or service inquiries, please contact Roca customer service through their official channels. Keep your proof of purchase for warranty claims.

For more information, visit: www.roca.com