Pohopa Bluetooth Speaker Instruction Manual

Introduction

The Pohopa B210D Bluetooth Speaker is a portable, waterproof outdoor wireless speaker designed to deliver high-quality audio with integrated LED strip lights. It supports advanced 5.8GHz multi-speaker pairing for a synchronized audio experience, making it ideal for various indoor and outdoor settings.

Image: The Pohopa B210D Bluetooth Speaker, showcasing its lantern design and integrated LED lights.

What's Included

Your Pohopa B210D Bluetooth Speaker package includes the following items:

• 1x Pohopa Bluetooth Speaker
• 1x Type-C Charging Cable
• 1x 3.5mm Audio Cable
• 1x User Manual

Image: The complete package contents of the Pohopa B210D speaker.

Specifications

Setup

Bluetooth Pairing (Single Speaker)

1. Ensure the speaker is charged and powered on.
2. Activate Bluetooth on your audio device (e.g., smartphone, tablet).
3. Select "Pohopa B210D" from the list of available Bluetooth devices.
4. Once connected, the speaker will indicate successful pairing.

Multi-Speaker Pairing (5.8GHz Wireless Technology)

The Pohopa B210D supports advanced 5.8GHz technology for connecting two or more units, creating a synchronized audio experience without delay. This allows for stereo or multi-channel surround sound setups.

1. First, pair your primary (host) speaker with your audio device via Bluetooth as described above.
2. For additional speakers, tap the Pairing button (the first top button on the left side of the speaker) once.
3. After hearing an audible cue like “PAIRING,” the additional speakers will automatically sync with the host speaker.

The Bluetooth range between your phone and a single speaker is up to 50 feet. For 5.8GHz multiple pairing, the distance between the host and sub-speakers extends up to 100 feet. Please note that outdoor environments may affect the effective range due to signal interference.

Image: Illustration of 5.8GHz wireless technology for multi-speaker synchronization.

Operating Instructions

Power On/Off

• Refer to the user manual for specific power button location and press-and-hold duration.

Audio Playback

The 10W high-performance speaker delivers rich, full-bodied stereo sound with crisp highs and deep bass. It features enhanced digital sound processing, noise/wind reduction, and a unique loudspeaker cavity structure for optimal audio quality.

Image: Depiction of the speaker's internal components highlighting superior sound quality.

LED Lights

The speaker is equipped with 20 built-in LED lights that provide a warm ambient glow. These lights can be used to enhance the atmosphere during nighttime gatherings.

• Refer to the user manual for instructions on how to turn the LED lights on or off, and if applicable, to adjust brightness or modes.

Battery Life and Charging

The speaker is powered by a 4400mAh high-capacity rechargeable battery. Battery performance varies based on usage:

• Up to 10 hours of continuous music playback with LED lights on (at 70% volume).
• Up to 6 hours at full volume with LED lights on.
• Over 15 hours of continuous music playback with LED lights off (at 70% volume).

A full charge takes approximately 8 hours using the provided Type-C charging cable.

Image: The Pohopa B210D speaker providing extended audio playback for outdoor activities.

Maintenance

Water and Dust Resistance

The Pohopa B210D speaker is designed with IP54 waterproof and dustproof protection. This makes it suitable for use in various outdoor environments such as patios, gardens, lawns, backyards, and during camping.

• While resistant to splashes and light rain, avoid submerging the speaker in water.
• Clean the speaker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Ensure the charging port cover is securely closed when not charging to maintain water resistance.

Image: The speaker demonstrating its water resistance, suitable for poolside use.

Troubleshooting

If you encounter issues with your Pohopa B210D speaker, please refer to the following common solutions:

No Power / Speaker Not Turning On

• Ensure the battery is fully charged. Connect the speaker to a power source using the provided Type-C cable and allow sufficient charging time (approx. 8 hours).
• Press and hold the power button for a few seconds to ensure it's not just a short press.

Bluetooth Connectivity Issues

• Make sure the speaker is within the Bluetooth range (up to 50ft from your device).
• Ensure Bluetooth is enabled on your audio device and the speaker is in pairing mode.
• Forget the speaker from your device's Bluetooth settings and attempt to re-pair.
• Turn off and on both the speaker and your audio device.

Multi-Speaker Pairing Problems

• Ensure the host speaker is successfully paired with your audio device first.
• Verify that all speakers are B210D models and are compatible for 5.8GHz pairing.
• Ensure additional speakers are within 100ft of the host speaker for optimal 5.8GHz connection.
• Repeat the pairing steps carefully: pair host, then tap pairing button on sub-speakers.

Low Volume or Distorted Sound

• Adjust the volume on both the speaker and your connected audio device.
• Ensure the speaker is fully charged, as low battery can affect sound output.
• Check for any obstructions around the speaker grille.
• If using the 3.5mm audio cable, ensure it is securely connected at both ends.

Loud Noise When Activating Bluetooth

• This may be a characteristic of the speaker's Bluetooth activation sound. Ensure volume is not set excessively high before connecting.

Warranty and Support

The Pohopa B210D Bluetooth Speaker comes with a 12-month worry-free warranty. For any questions, technical assistance, or warranty claims, please contact Pohopa customer support. Refer to the contact information provided in your quick guide or on the official Pohopa website.

Additional protection plans may be available for purchase separately, offering extended coverage beyond the standard warranty period.