Important Safety Information
Always protect the unit with appropriate circuit breakers or fuses as per the nameplate. Ensure the supply voltage (volts) matches the nameplate indication. This unit must be grounded. Use copper conductors only. Power leads suitable for 75°C (167°F) are required. Switch off the power supply to the unit at the circuit breaker/fuse before any installation, repair, or cleaning. Verify that the unit is designed for its intended use. Recommended heating capacity: 1.25 W/cubic foot (0.03 m³).
Product Overview
The Uniwatt by Stelpro UHC0502W is a modern, surface-mounted quiet convector heater designed for efficient and consistent warmth. It features a sleek design with rounded sides and a 22-gauge steel cabinet that promotes efficient airflow. This 500W, 240V unit is proudly made in Canada and includes a built-in electronic thermostat for precise temperature control.
Front angled view of the Uniwatt by Stelpro convector heater.
Direct front view of the convector heater, highlighting its minimalist design.
Side profile of the heater, showing its slim depth.
Rear view of the heater, showing mounting points and electrical entry.
The 'Proudly Made in Canada' logo, featuring a maple leaf, indicating product origin.
Key Features:
- Optimal Heating Solution: Provides consistent, quiet warmth, suitable for various rooms like basements, bedrooms, kitchens, living rooms, or offices.
- Modern Aesthetic Design: Features sleek rounded sides and clean lines with a 22-gauge steel cabinet for efficient airflow.
- Energy Efficient: Designed for use with a separate electronic thermostat to optimize energy usage.
- Quiet Operation: Ensures warmth without noise, ideal for quiet environments.
- Proudly Made in Canada: Manufactured with sound design, comfort, and performance in mind.
Setup and Installation
The Uniwatt convector heater is designed for streamlined surface or wall-mounted installation. Ensure a minimum clearance of 4 inches from the floor for proper operation.
Installation Steps:
- Preparation: Before beginning, ensure the power supply to the installation area is switched off at the circuit breaker or fuse.
- Mounting: The heater includes a concealed mounting bracket. Securely attach the bracket to the wall at the desired location, ensuring it is level and provides the necessary clearance from the floor.
- Electrical Connection: This unit requires a 240V hardwired connection. Use the back entry plate with cable clamps for a tidy and secure setup. Connect the power leads according to local electrical codes.
- Mounting the Heater: Once wiring is complete and secure, mount the heater onto the installed bracket.
Diagram illustrating the dimensions for proper installation, including height and width.
Illustration of the 240V hardwired connection process within a junction box.
View of the heater's internal heating elements and wiring connections.
The convector heater seamlessly installed on a wall in an office environment.
Operating Instructions
The Uniwatt convector heater is equipped with a built-in electronic thermostat for precise temperature control and energy efficiency.
Using the Electronic Thermostat:
Detailed view of the electronic thermostat display and control buttons.
- Setting Temperature: Use the control buttons on the thermostat to adjust the desired room temperature. The digital display will show the current and set temperatures.
- Energy Optimization: The electronic thermostat helps maintain a consistent temperature, reducing energy consumption by cycling the heater on and off as needed.
- Quiet Operation: This convector heater operates silently, making it suitable for bedrooms and other noise-sensitive areas.
Choosing the Right Heating Capacity:
To ensure optimal heating, select a heater with appropriate wattage for your room size. Refer to the table below for guidance.
Chart indicating recommended wattage based on the area to be heated (in square feet).
| Area to Heat (ft²) | Required Power (Watts) |
|---|---|
| 0 - 30 | 300 |
| 30 - 50 | 500 |
| 50 - 75 | 750 |
| 75 - 100 | 1000 |
| 100 - 150 | 1500 |
| 150 - 200 | 2000 |
| 200 - 250 | 2500 |
| 250 - 300 | 3000 |
| 300 - 350 | 3500 |
| 350 - 400 | 4000 |
| 400 - 450 | 4500 |
| 450 - 500 | 5000 |
Maintenance
Regular maintenance ensures the longevity and efficient operation of your convector heater. Always disconnect power at the circuit breaker before performing any maintenance.
- Cleaning: Periodically wipe the exterior of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no liquid enters the unit.
- Dust Removal: Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and outlet grilles. Accumulated dust can reduce heating efficiency.
- Inspection: Annually inspect the power cord and connections for any signs of damage or wear. If any damage is found, contact a qualified electrician for repair.
Troubleshooting
If you experience issues with your Uniwatt convector heater, refer to the following common troubleshooting steps.
| Problem | Possible Cause & Solution |
|---|---|
| Heater does not turn on. |
|
| Insufficient heating. |
|
| Unusual noises. |
|
If the problem persists after attempting these solutions, contact a qualified technician or Stelpro customer support.
Specifications
| Attribute | Detail |
|---|---|
| Brand | Stelpro |
| Model Number | UHC0502W |
| Colour | White |
| Product Dimensions | 43.97 x 10 x 44.61 cm (17.3 x 3.9 x 17.6 inches) |
| Power/Wattage | 500 watts |
| Voltage | 240 Volts |
| Material | Steel |
| Special Features | Electronic Thermostat |
| Item Weight | 5.08 kg (11.2 lbs) |
| Mounting Type | Wall Mount |
| Heating Method | Convection |
| Indoor/Outdoor Usage | Indoor |
| Date First Available | Jan. 30 2017 |
| Manufacturer | Stelpro |
| Place of Business | 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 6L7, Canada |
Warranty and Support
The Uniwatt by Stelpro convector heater comes with a 2-year warranty.
Visual representation of the 2-year warranty, 500 Watts power rating, and totally quiet operation.
For technical support, warranty claims, or further assistance, please contact Stelpro directly:
- Phone: 1-844-783-5776
- Email: info@stelpro.com
- Address: 1041 Rue Parent, Saint-Bruno-de-Montarville, QC J3V 6L7, Canada
Please have your model number (UHC0502W) and date of purchase ready when contacting support.
