Sauder Palladia L-Shaped Desk Instruction Manual

Product Overview

The Sauder Palladia L-Shaped Desk is designed to provide a functional and stylish workspace. It features a versatile L-shaped configuration, multiple storage options including a file drawer, additional utility drawers, and a concealed storage area for a CPU tower. The desk also incorporates cable management grommets and a flip-down panel for a keyboard or laptop.

Image: The Sauder Palladia L-Shaped Desk, showcasing its Vintage Oak finish and spacious design.

Image: The L-shaped desk positioned in a home office environment, demonstrating its integration into a living space.

Key Features:

• Center drawer/shelf with flip-down panel for laptop or keyboard, can be fastened on left or right side.
• File drawer with full extension slides, accommodating letter or legal size hanging files.
• Three additional drawers with metal runners and safety stops for organized storage.
• Desktop grommet holes for efficient electrical cord access and management.
• Concealed storage area behind a door, designed to hold a vertical CPU tower, with an adjustable shelf.
• Durable engineered wood construction with a Vintage Oak finish.

Important Safety Information

• Always assemble the desk according to the provided instructions to ensure structural integrity.
• Ensure the desk is properly anchored to the wall or floor to prevent tipping, especially when utilizing the L-shaped design.
• Do not exceed the maximum weight recommendation of 70 Pounds for the desk surface to prevent damage or instability.
• This product is intended for use as a desk and should not be used for purposes other than its design.

Setup and Assembly

The Sauder Palladia L-Shaped Desk requires assembly. Detailed step-by-step instructions are included with your product packaging. It is recommended to lay out all parts and hardware before beginning assembly. A Phillips head screwdriver and a flathead screwdriver will be required.

For visual guidance on specific assembly components, please refer to the video below:

Assembly Tips:

• Ensure you have adequate space for assembly.
• Follow the numerical order of the steps in the instruction manual.
• Do not overtighten screws unless specified, as this can damage the material.
• If you encounter any difficulties, refer to the troubleshooting section or contact customer support.

Image: Detailed diagram illustrating the overall dimensions and internal measurements of the desk's drawers and storage compartments.

Operating Instructions

Keyboard Tray / Laptop Shelf:

The center drawer features a flip-down panel, allowing it to function as a keyboard tray or a shelf for a laptop. This panel can be positioned on either the left or right side during assembly to suit your preference.

Image: The desk with its keyboard tray extended and the file drawer open, demonstrating functional access.

File Drawer:

The file drawer is equipped with full extension slides, allowing for complete access to your documents. It is designed to hold both letter and legal-sized hanging files.

Image: A close-up view of the file drawer, showing its full extension and capacity for hanging files.

Additional Drawers:

The desk includes three additional utility drawers that operate on smooth metal runners with safety stops. These drawers provide ample space for office supplies and personal items.

Image: A detailed view of the desk's drawer pulls, highlighting the design and finish.

Cable Management:

Desktop grommet holes are integrated into the desk surface to facilitate organized routing of electrical cords and cables, helping to maintain a tidy workspace.

CPU Tower Storage:

A dedicated storage area behind a door is provided for a vertical CPU tower. This compartment includes an adjustable shelf for flexible storage solutions.

Maintenance

Cleaning:

• Wipe surfaces with a soft, damp cloth.
• Avoid using harsh chemicals, abrasive cleaners, or polishes that may damage the finish.
• Promptly clean up spills to prevent staining or water damage.

General Care:

• Periodically check all fasteners and tighten if necessary to ensure stability.
• Avoid placing hot items directly on the desk surface; use coasters or protective pads.
• Protect the desk from direct sunlight and extreme temperature changes to prevent warping or fading.

Troubleshooting

Desk Wobbles:

• Ensure all assembly fasteners are securely tightened.
• Verify the desk is on a level surface. Adjust leg levelers if present, or use shims if needed.

Drawers Stick or Don't Close Properly:

• Check that the drawer slides are correctly installed and aligned.
• Ensure the drawer is not overloaded.
• Clean the drawer slides to remove any dust or debris.

Missing Parts or Damaged Components:

• Refer to the parts list in your assembly manual to identify missing items.
• Contact Sauder customer support for replacement parts.

If you experience issues not covered here, please contact customer support for assistance.

Specifications

Warranty and Support

Warranty Information:

This Sauder product comes with a 5-year limited warranty on parts. For specific details regarding warranty coverage and claims, please refer to the documentation included with your product or contact Sauder customer service.

Customer Support:

For assistance with assembly, missing parts, or any other product-related inquiries, please contact Sauder customer support. You can find contact information on the Sauder website or within your product packaging.

Visit the official Sauder Store for more information and support: Sauder Store