Introduction
This manual provides essential instructions for the safe and effective use of your UpBright 15V AC/DC Adapter. This adapter is designed to provide reliable power for charging compatible Pilot InstaBoost car jump starters, including models 10KJS, m10kjs, CA-9801, and CA-9802. Please read this manual thoroughly before use and retain it for future reference.
Figure 1: UpBright 15V AC/DC Adapter. This image shows the main adapter unit with its power cord and barrel connector.
Setup Instructions
Follow these steps to properly set up your AC/DC adapter:
- Verify Compatibility: Ensure your jump starter requires a 15V DC input with a 1A current and has a compatible barrel connector. This adapter is specifically designed for Pilot InstaBoost 10KJS, m10kjs, CA-9801, and CA-9802 models.
- Check Polarity: Confirm the polarity of your jump starter's input port matches the adapter's output. The adapter features a center-positive polarity. Incorrect polarity can damage your device.
Figure 2: Polarity Diagram. The image illustrates the correct (center positive) and incorrect (center negative) polarity configurations for the barrel connector. Ensure your device requires center positive.
- Connect to Jump Starter: Insert the barrel connector end of the adapter firmly into the DC input port of your Pilot InstaBoost jump starter.
- Connect to Power Outlet: Plug the AC prongs of the adapter into a standard 100-240VAC 50/60Hz wall outlet.
Operating Instructions
Once connected, the adapter will begin charging your jump starter. Observe the charging indicator on your jump starter (if available) to monitor the charging status.
- Charging Time: Refer to your jump starter's manual for estimated charging times.
- Full Charge: Disconnect the adapter from the wall outlet and then from the jump starter once the jump starter indicates a full charge.
- Safety Features: The UpBright adapter includes Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure safe charging.
Maintenance
To ensure the longevity and proper function of your adapter:
- Storage: Store the adapter in a cool, dry place when not in use.
- Cleaning: Wipe the adapter with a dry, soft cloth. Do not use liquid cleaners.
- Cable Care: Avoid bending or crimping the cable excessively. Do not pull the cable to disconnect from the outlet; always grasp the plug.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Jump starter not charging. |
|
|
| Adapter feels warm during use. | Normal operation. | A slight warmth is normal during charging. If it becomes excessively hot or emits smoke/odor, disconnect immediately and cease use. |
Specifications
| Feature | Detail |
|---|---|
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | 15V DC |
| Output Current | 1A (1000mA) |
| Wattage | 15 Watts |
| Connector Type | Barrel Connector |
| Polarity | Center Positive |
| Protection Features | OVP, OCP, SCP |
| Product Dimensions | 3 x 3 x 1 inches |
| Item Weight | 8.8 ounces |
| Certifications | CECCCROHS |
Warranty Information
UpBright products come with a limited warranty. Please refer to the warranty certificate for specific terms and conditions.
- Refund Period: 30 days.
- Exchange Period: 24 months.
Figure 3: UpBright Limited Warranty Certificate. This image shows a document titled "LIMITED WARRANTY CERTIFICATE" and a "PRODUCT WARRANTY" seal, indicating the product's warranty coverage.
Support
For further assistance or inquiries regarding your UpBright 15V AC/DC Adapter, please refer to the contact information provided with your purchase or visit the official UpBright website.
Manufacturer: UpBright
