Polk Audio SB225 Universal Bluetooth Soundbar Instruction Manual

Introduction

This manual provides essential information for the proper setup, operation, and maintenance of your Polk Audio SB225 Universal Bluetooth Soundbar. Please read these instructions carefully before using the product to ensure optimal performance and longevity.

1. Setup

1.1 Unpacking

Carefully remove all components from the packaging. Ensure all items listed below are present. If any items are missing or damaged, contact Polk Audio customer support.

Polk Audio SB225 Soundbar
Remote Control
Power Adapter
Optical Cable (may vary by region)
RCA Stereo Audio Cable (may vary by region)
Quick Start Guide (this document)

Polk Audio SB225 Soundbar and included accessories

Image: The Polk Audio SB225 soundbar displayed with its remote control, power adapter, and various audio cables, indicating the contents typically found in the product packaging.

1.2 Placement

Position the soundbar centrally below your television for the best audio experience. Ensure there are no obstructions in front of the soundbar that could block the sound or the remote control's infrared signal. The soundbar dimensions are approximately 35 x 5 x 6 inches (W x D x H).

Front and side view of Polk Audio SB225 Soundbar

Image: A view of the Polk Audio SB225 soundbar, showcasing its sleek black design and compact form factor suitable for placement below a television.

1.3 Connections

Connect the soundbar to your television or other audio sources using one of the following methods:

Optical Digital Audio (Recommended): Connect one end of the optical cable to the OPTICAL IN port on the soundbar and the other end to the optical digital audio output on your TV.
Auxiliary Audio: Connect one end of the 3.5mm stereo audio cable (or RCA to 3.5mm adapter) to the AUX IN port on the soundbar and the other end to the headphone jack or RCA audio output on your TV or audio source.

Rear panel of Polk Audio SB225 Soundbar showing input ports

Image: The rear panel of the Polk Audio SB225 soundbar, highlighting the various input ports including Optical, AUX, and the power input, along with mounting points.

1.4 Power Connection

Connect the power adapter to the POWER input on the back of the soundbar, then plug the adapter into a wall outlet. The soundbar will enter standby mode.

Image: The power adapter for the Polk Audio SB225 soundbar, showing the AC plug and the DC output connector.

2. Operating Instructions

2.1 Power On/Off

Press the POWER button on the soundbar or the remote control to turn the unit on or off. The LED indicator on the soundbar will change color to indicate its status.

2.2 Input Selection

Press the INPUT button on the remote control or the soundbar to cycle through available audio inputs: Optical, Auxiliary, and Bluetooth.

2.3 Volume Control

Use the VOLUME UP (+) and VOLUME DOWN (-) buttons on the remote control or the soundbar to adjust the audio level. The soundbar features Smart Bar Technology, allowing it to learn your TV's remote control volume commands. Refer to the "Smart Bar Technology" section in the full manual for detailed instructions on programming your TV remote.

2.4 Bluetooth Pairing

To connect a Bluetooth device:

Press the BLUETOOTH button on the remote control or the soundbar. The Bluetooth indicator will flash, indicating pairing mode.
On your mobile device (smartphone, tablet, PC), enable Bluetooth and search for available devices.
Select "Polk SB225" from the list of devices.
Once paired, the Bluetooth indicator on the soundbar will glow solid.

Note: The soundbar can remember multiple Bluetooth devices but will only connect to one at a time.

3. Maintenance

3.1 Cleaning

To clean the soundbar, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the finish or internal components. Ensure the soundbar is powered off and unplugged before cleaning.

3.2 Storage

If storing the soundbar for an extended period, disconnect it from power and store it in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to keep the original packaging for storage and transport.

4. Troubleshooting

Problem	Possible Cause	Solution
No sound from soundbar.	Soundbar is off or muted. Incorrect input selected. Cables are not connected properly. TV audio output settings are incorrect.	Ensure soundbar is on and not muted. Select the correct input (Optical, AUX, Bluetooth). Check all cable connections. Verify TV audio output is set to external speakers or PCM for optical.
Bluetooth device will not pair.	Soundbar not in pairing mode. Device too far from soundbar. Another device is already connected.	Press the Bluetooth button to enter pairing mode. Move device closer to the soundbar. Disconnect any currently paired devices.
Remote control not working.	Batteries are dead or inserted incorrectly. Obstruction between remote and soundbar.	Replace batteries and check polarity. Ensure a clear line of sight to the soundbar's IR receiver.
Sound is distorted.	Volume too high. Source audio quality is poor.	Reduce the volume. Check the audio source for quality issues.

5. Specifications

Model: SB225
Speaker Type: Soundbar
Connectivity Technology: Bluetooth
Audio Output Mode: Stereo
Surround Sound Channel Configuration: 2.0
Output Wattage: 150 Watts
Item Weight: 5 pounds
Product Dimensions: 35 x 5 x 6 inches (W x D x H)
Included Components: Remote
Power Source: Corded Electric
Compatible Devices: Laptop, Smartphone, Television
Control Method: Remote

6. Warranty Information

The Polk Audio SB225 Soundbar comes with a Limited Warranty. Please refer to the warranty card included with your product or visit the official Polk Audio website for detailed terms and conditions regarding warranty coverage, duration, and claims procedures.

7. Support

For technical assistance, troubleshooting not covered in this manual, or service inquiries, please contact Polk Audio customer support. Contact information can typically be found on the official Polk Audio website or in the product packaging.

Online Support: www.polkaudio.com/support (Example link, actual link may vary)

	Polk MagniFi Soundbar Setup Guide and Product Information Comprehensive setup guide and product information for the Polk MagniFi Voice-optimizing Wireless Sound Bar System, including connection instructions, remote control details, safety precautions, and troubleshooting.
	Polk REACT SOUND BAR Owner's Manual: Setup, Operation & Guide Explore the Polk REACT SOUND BAR owner's manual for comprehensive setup, operation, and troubleshooting guides. Learn about Alexa integration, Bluetooth, connections, and audio settings for an enhanced home theater experience.
	Polk MagniFi Soundbar Quick Start Guide: Setup and Operation This guide provides essential information for setting up and operating your Polk MagniFi Soundbar, including connection instructions, remote control usage, and troubleshooting tips.
	Polk MagniFi Mini AX Quick Start Guide A quick start guide for the Polk MagniFi Mini AX soundbar, covering setup, connections, and basic features.
	Polk MagniFi Soundbar Setup Guide: Connect and Operate This guide provides instructions for setting up and operating the Polk MagniFi Voice-Optimizing Wireless Sound Bar System, including connection, remote control, and troubleshooting.
	Polk MagniFi Mini Home Theater Sound Bar System - Quick Start Guide & User Manual Comprehensive guide for the Polk MagniFi Mini Home Theater Sound Bar System. Includes setup instructions, connection options, remote control details, sound modes, wireless setup (Bluetooth, Google Cast), safety precautions, and warranty information.

Polk Audio SB225