eldom CS10 Aqua Water Kettle

Introduction

Thank you for choosing the eldom CS10 Aqua Water Kettle. This stainless steel electric kettle is designed for efficient and safe water boiling. Please read this instruction manual carefully before first use and keep it for future reference. Proper use and maintenance will ensure long-lasting performance and safety.

Image: The eldom CS10 Aqua Water Kettle, made of stainless steel, is shown on a kitchen counter, illustrating its compact design.

Important Safety Instructions

• Read all instructions before using the appliance.
• Do not immerse the kettle, power base, cord, or plug in water or other liquids.
• Ensure the voltage indicated on the appliance corresponds to your local mains voltage before connecting the kettle.
• Do not operate the kettle if the cord, plug, or the appliance itself is damaged. Contact authorized service personnel for repair.
• Keep the appliance out of reach of children.
• Always place the kettle on a firm, flat, heat-resistant surface.
• Do not fill the kettle above the MAX level indicator to prevent boiling water from overflowing.
• Do not operate the kettle without water. The kettle is equipped with boil-dry protection, but continuous operation without water can damage the heating element.
• Exercise caution when handling hot water. The kettle body becomes hot during operation. Use the handle only.
• Unplug the kettle from the outlet when not in use and before cleaning.
• This appliance is for household use only.
• The kettle features an automatic shut-off function once water boils.

Product Components

The eldom CS10 Aqua Water Kettle package includes:

• Stainless Steel Kettle Body (1.0 Litre capacity)
• 360° Swivel Power Base with cord storage
• Removable and Washable Anti-Calc Filter
• Instruction Manual

Image: The retail packaging for the eldom CS10 Aqua Water Kettle, displaying product features and branding.

Setup and First Use

1. Unpacking: Carefully remove the kettle and all accessories from the packaging. Retain the packaging for future transport or storage.
2. Placement: Place the power base on a stable, flat, and dry surface away from the edge of the countertop.
3. Initial Cleaning: Before first use, fill the kettle with clean water up to the MAX level. Boil the water and then discard it. Repeat this process 2-3 times to remove any manufacturing residues.
4. Cord Storage: The power base features integrated cord storage. Adjust the cord length as needed to avoid tangles.

Operating Instructions

1. Filling the Kettle: Open the lid and fill the kettle with the desired amount of fresh water. Ensure the water level is between the MIN and MAX marks on the water level indicator. Do not overfill.
2. Closing the Lid: Close the lid securely until it clicks into place.
3. Placing on Power Base: Place the kettle firmly onto the 360° swivel power base. The cordless design allows for easy placement from any angle.
4. Connecting to Power: Plug the power cord into a suitable electrical outlet.
5. Boiling Water: Press the ON/OFF switch located on the handle. The blue LED indicator light will illuminate, signifying that the kettle is heating.
6. Automatic Shut-off: The kettle will automatically switch off once the water has boiled. The indicator light will turn off.
7. Pouring: Carefully lift the kettle from its base and pour the hot water. Always hold the kettle by its handle, as the body will be hot.
8. Re-boiling: If you need to re-boil water, wait a few moments for the thermostat to reset before pressing the ON/OFF switch again.

Image: A hand holding the eldom CS10 Aqua Water Kettle by its ergonomic handle, demonstrating its portability and ease of pouring.

Image: A detailed view of the eldom CS10 Aqua Water Kettle showing the blue LED indicator light, which illuminates during operation.

Maintenance and Cleaning

Regular cleaning and maintenance will extend the life of your kettle.

1. Before Cleaning: Always unplug the kettle from the power outlet and allow it to cool completely before cleaning.
2. Exterior Cleaning: Wipe the exterior of the kettle with a soft, damp cloth. Do not use abrasive cleaners or scouring pads, as they may scratch the stainless steel surface.
3. Interior Cleaning: The interior is made of food-grade stainless steel. For general cleaning, rinse with clean water.
4. Anti-Calc Filter: The removable anti-calc filter can be detached for cleaning. Rinse it under running water or use a soft brush to remove any mineral deposits. Ensure it is properly re-inserted before use.
5. Descaling: Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas.
   • Fill the kettle with a mixture of water and white vinegar (e.g., 1 part vinegar to 2 parts water) or a commercial descaling solution.
   • Bring the mixture to a boil and let it stand for at least 30 minutes, or longer for heavy deposits.
   • Empty the kettle and rinse thoroughly with fresh water several times to remove any vinegar residue.
   • Boil fresh water once or twice and discard to ensure no taste remains.

Image: The eldom CS10 Aqua Water Kettle with its lid open, revealing the stainless steel interior and the wide opening for easy filling and cleaning.

Troubleshooting

Technical Specifications

Warranty and Support

The eldom CS10 Aqua Water Kettle is designed for reliability and performance. For any questions, technical assistance, or warranty claims, please contact your retailer or the manufacturer's customer support. Please refer to your purchase documentation for specific warranty terms and contact information.

As stated in the product description, the manufacturer aims to respond to inquiries within 24 hours.