Introduction
This user manual provides detailed instructions for the installation, operation, and maintenance of your BAZZ Slim Square Integrated LED Recessed Light Fixture Kit. Designed for both new construction and retrofit applications, this fixture offers energy-efficient LED lighting with dimming capabilities, suitable for various indoor environments, including damp locations.
Key features include:
- Integrated LED Technology: Energy-efficient lighting with a long bulb life of 30,000 hours.
- Flexible Application: Suitable for new construction, retro-fit projects, and insulated ceilings.
- No Box Required: Simplifies installation in insulated ceilings.
- Damp Location Rated: Ideal for use in bathrooms and showers.
- Dimmable: Supports flicker-free dimming for adjustable ambiance.
Safety Information
Please read all instructions carefully before beginning installation. Failure to do so may result in electric shock, fire, or other injuries that could be hazardous or even fatal. Always consult a qualified electrician if you are unsure about any part of the installation process.
- WARNING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing.
- Ensure all electrical connections are made in accordance with local codes, ordinances, and the National Electric Code (NEC).
- Do not alter or modify the fixture. Any alterations may void the warranty and create a safety hazard.
- This fixture is designed for 120 Volts AC. Ensure your power supply matches this requirement.
- Do not install in locations where the operating temperature exceeds the fixture's rated temperature.
- Handle the LED light source with care. Do not touch the LED directly.
Package Contents
Verify that all components listed below are included in your package before beginning installation:
- 1 x Integrated LED fixture
- Built-in Junction box
- Decorative trim
- Housing with installation clips and thermal protection
- Porcelain socket (pre-installed or included)
Image: Overview of the BAZZ Slim Square Integrated LED Recessed Light Fixture Kit, showing the integrated LED fixture, junction box, and connecting conduit.
Installation Guide
This fixture is designed for easy installation in both new construction and retrofit applications. It is suitable for insulated ceilings and does not require a separate housing box.
Pre-Installation Considerations:
- Ensure power is disconnected at the circuit breaker before starting.
- Determine the desired location for the fixture.
- The fixture requires a 4-inch (102mm) square cut-out for installation.
- Refer to the dimensions diagram for precise measurements.
Image: Detailed dimensions of the BAZZ Slim Square Recessed Light Fixture, including overall length (11 inches / 279 mm), fixture height (1 3/8 inches / 35 mm), and required cut-out size (4 1/2 inches / 114 mm square).
Installation Steps:
- Turn Off Power: Locate the circuit breaker controlling the area where you will install the light and turn off the power. Verify power is off using a voltage tester.
- Prepare Opening: Cut a 4-inch (102mm) square hole in the ceiling at the desired location. Ensure there are no obstructions (joists, pipes, wires) within the ceiling space.
- Connect Wiring: Open the junction box cover. Connect the house wiring (live, neutral, ground) to the corresponding wires inside the fixture's junction box using appropriate wire connectors. Ensure all connections are secure.
- Secure Junction Box: Place the junction box into the ceiling opening. The fixture is designed to be installed without a separate housing box, especially for insulated ceilings.
- Insert Fixture: Gently push the light fixture into the ceiling opening. The spring-loaded clips on the sides of the fixture will automatically engage and secure the fixture to the ceiling.
- Test Operation: Restore power at the circuit breaker. Turn on the light switch to test the fixture.
Operating Instructions
The BAZZ Slim Square Integrated LED Recessed Light Fixture is designed for simple operation.
- Standard Operation: Turn the wall switch connected to the fixture ON/OFF to control the light.
- Dimming Function: This fixture is fully dimmable. For optimal performance, use with a compatible LED dimmer switch. Consult the BAZZ dimmer compatibility list for recommended models.
Maintenance
The BAZZ Slim Square Integrated LED Recessed Light Fixture requires minimal maintenance due to its durable design and long-lasting LED technology.
- Cleaning: To clean the fixture, ensure power is off. Wipe the surface with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electrical components.
- LED Longevity: The integrated LED has a lifespan of 30,000 hours and does not require replacement.
Image: BAZZ Slim Square Recessed Light Fixtures illuminating a modern bathroom, demonstrating their suitability for damp locations.
Troubleshooting
If you experience issues with your BAZZ Slim Square Integrated LED Recessed Light Fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture; loose wiring connection; faulty switch. | Check circuit breaker. Verify all wire connections are secure. Test or replace the wall switch. |
| Light flickers or dims improperly. | Incompatible dimmer switch; loose wiring. | Ensure you are using an LED-compatible dimmer. Check wiring connections. |
| Light is not as bright as expected. | Dimmer setting too low; incorrect voltage. | Adjust dimmer to maximum brightness. Verify power supply is 120 Volts. |
Specifications
Technical specifications for the BAZZ Slim Square Integrated LED Recessed Light Fixture Kit:
| Model Number | SLMSQ4W |
| Manufacturer | Bazz |
| Product Dimensions | 28.58 x 11.43 x 3.51 cm (11.25 x 4.5 x 1.38 inches) |
| Item Weight | 363 g (0.8 lbs) |
| Size | 4-in |
| Colour | White |
| Style | Recessed |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Type of Bulb | LED (Integrated) |
| Special Features | Dimmable, Damp Location Suitable |
| Usage | Residential |
| Item Package Quantity | 1 |
Warranty Information
The BAZZ Slim Square Integrated LED Recessed Light Fixture Kit comes with a 5-year warranty against manufacturer defects. This warranty covers defects in materials and workmanship under normal use and service.
Please note: The warranty does not apply to free bulbs included with light fixtures, though this product features an integrated LED that does not require separate bulbs.
For warranty claims or further details, please retain your proof of purchase and contact BAZZ customer support.
Support
If you require further assistance, have questions about installation, or need to troubleshoot an issue not covered in this manual, please contact BAZZ customer support.
For the most up-to-date contact information and resources, please visit the official BAZZ website or refer to the product packaging.
You can also visit the BAZZ Store on Amazon for more product information and support resources.
