1. Introduction
This instruction manual provides essential information for the safe and effective use of your Logilink LPS223 Outdoor Weatherproof Electrical Box. Please read this manual thoroughly before installation and operation, and retain it for future reference.
The Logilink LPS223 is designed to provide a secure and weatherproof enclosure for electrical connections, power strips, and other electrical equipment in outdoor environments. It offers protection against dust and splashing water, making it suitable for garden lighting, outdoor tools, and other temporary outdoor electrical setups.
2. Safety Information
- Always ensure that the electrical box is properly closed and sealed when in use outdoors to maintain its IP54 rating.
- Do not submerge the electrical box in water. It is designed for protection against splashing water and dust, not immersion.
- Before placing any electrical devices inside, ensure they are in good working condition and their cables are undamaged.
- Route cables through the designated openings only. Do not force cables through tight spaces.
- Always disconnect power to electrical devices before opening the box for installation or maintenance.
- If any damage to the electrical box is observed, discontinue use immediately and replace the unit.
- Keep out of reach of children.
3. Package Contents
- 1 x Logilink LPS223 Outdoor Weatherproof Electrical Box
4. Setup and Installation
Follow these steps to set up your Logilink LPS223 electrical box:
- Open the Electrical Box: Unlatch the side clips and open the lid of the electrical box.
- Prepare Internal Components: Place your power strip, adapters, or other electrical devices inside the box. The box is designed to accommodate various sizes, including larger adapters and timers.
Figure 4.1: The electrical box with its lid open, revealing the spacious interior.
Figure 4.2: Example of a power strip and plugs placed inside the open electrical box.
- Secure Internal Components (Optional): The box may include internal velcro straps or mounting points to help secure power strips or other devices, preventing them from shifting.
Figure 4.3: Securing a power strip using the internal velcro strips.
- Route Cables: Carefully route the power cables from your devices through the designated cable entry points on the sides of the box. Ensure cables are not pinched or strained.
Figure 4.4: Cables routed through the side openings of the electrical box.
Figure 4.5: Securing cables with the internal cable management flap.
Figure 4.6: Detailed view of the cable routing and securing mechanism.
- Close and Latch: Close the lid firmly and ensure both side clips are securely latched. This ensures the weatherproof seal.
Figure 4.7: The Logilink LPS223 electrical box in its closed and secured state.
Figure 4.8: The electrical box in an outdoor setting, protecting electrical connections for garden equipment.
5. Operating Instructions
Once installed, the Logilink LPS223 operates passively by protecting your electrical connections. Ensure the box remains closed and latched during outdoor use to maintain its IP54 protection against dust and splashing water. Periodically check the integrity of the seals and cable entry points.
6. Maintenance
- Cleaning: Clean the exterior of the electrical box with a damp cloth. Do not use abrasive cleaners or solvents. Ensure the box is dry before opening or closing.
- Inspection: Regularly inspect the box for any signs of damage, cracks, or wear on the seals. If damage is found, the weatherproof integrity may be compromised, and the box should be replaced.
- Cable Integrity: Periodically check the cables routed through the box for any signs of damage or fraying.
7. Troubleshooting
- Water Inside the Box: If water is found inside, immediately disconnect power to all devices. Check if the lid was properly closed and latched, and if cables were routed correctly through the designated openings. Inspect the seals for damage.
- Difficulty Closing the Lid: Ensure no cables or devices are obstructing the lid's closure. Verify that the internal components are positioned correctly and not overfilling the box.
- Loose Cables: If cables are loose, ensure they are properly secured within the cable management system and that the entry points are snug around the cables.
8. Specifications
| Model Number | LPS223 |
| Brand | Logilink |
| Material | Plastic |
| Color | Gray |
| Product Dimensions (L x W x H) | 320 x 210 x 115 mm (12.6" x 8.27" x 4.53") |
| Item Weight | 0.88 kg (1.94 lbs) |
| IP Rating | IP54 (Protection from dust and splashing water) |
| Installation Type | Screw-In (for mounting, screws not included) |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Logilink website. Contact their customer service for assistance with product-related inquiries.
