RHYTHM Citizen 8MY516-018 Radio-Controlled Wall Clock User Manual

1. Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your RHYTHM Citizen 8MY516-018 Radio-Controlled Wall Clock. Please read this manual thoroughly before using the product to ensure correct usage and optimal performance.

Product Overview

The RHYTHM Citizen 8MY516-018 is an analog wall clock designed for accurate timekeeping through radio wave synchronization. It features a clear dial, a smooth continuous second hand, and an elegant golden finish with crystal decoration.

Key Features

• Radio-Controlled Time Synchronization: Automatically adjusts time for precision.
• Analog Display: Classic and easy-to-read numerals.
• Continuous Second Hand: Smooth, sweeping motion for quiet operation.
• Battery-Powered: Operates with one AA alkaline battery.
• Battery Replacement Notification: Alerts when battery power is low.
• Elegant Design: Golden finish with decorative crystal accents.

Figure 1: Front view of the RHYTHM Citizen 8MY516-018 Wall Clock.

2. Package Contents

Please verify that all items listed below are included in your package:

• RHYTHM Citizen 8MY516-018 Wall Clock Unit
• Instruction Manual (this document)
• Trial AA Alkaline Battery (for initial setup)

Figure 2: Rear view of the clock, showing the battery compartment.

3. Safety Information

To ensure safe operation and prevent damage, please observe the following:

• Do not expose the clock to direct sunlight, extreme temperatures, or high humidity.
• Keep the clock away from strong magnetic fields, which may interfere with its operation.
• Use only the specified battery type (AA alkaline). Do not mix old and new batteries or different battery types.
• Dispose of used batteries according to local regulations.
• Do not attempt to disassemble or repair the clock yourself. Contact qualified service personnel.
• Ensure the clock is securely mounted on the wall to prevent falling.

4. Setup

4.1 Battery Installation

1. Locate the battery compartment on the back of the clock (refer to Figure 2).
2. Open the battery compartment cover.
3. Insert one (1) AA alkaline battery, ensuring the correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment cover securely.

4.2 Initial Time Synchronization

After battery installation, the clock will automatically attempt to receive a radio time signal. This process may take several minutes.

1. Place the clock in a location where it can receive a clear radio signal. Avoid placing it near large metal objects, electronic devices, or in basements.
2. The clock hands will move to the 12 o'clock position and then begin searching for the time signal.
3. Once the signal is received, the clock will automatically set itself to the correct time. This typically occurs within 5-10 minutes, but can take longer depending on signal strength.
4. If the clock does not set itself after an extended period, try moving it to a different location or manually setting the time (refer to Section 5.1 for manual setting).

Figure 3: Illustration of radio wave reception for time synchronization.

5. Operation

5.1 Radio-Controlled Timekeeping

Your RHYTHM Citizen clock is designed to automatically synchronize with official time signals, ensuring accurate time display without manual adjustment. The clock will periodically attempt to receive the signal, typically overnight, to correct any minor discrepancies.

In areas with poor reception, or if you need to set the time manually (e.g., after a long period without power), there may be a manual setting button or procedure. Refer to the specific instructions on the clock's movement or a detailed diagram if provided with your physical product.

5.2 Continuous Second Hand

The clock features a continuous (sweeping) second hand, which moves smoothly around the dial rather than in distinct ticks. This design provides quiet operation, ideal for bedrooms or quiet environments.

Figure 4: Close-up of the continuous second hand and crystal decoration.

6. Maintenance

6.1 Cleaning

To clean the clock, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these can damage the finish or internal components.

6.2 Battery Replacement

The clock is equipped with a battery replacement notification function. When the battery power is low, the clock's operation may become erratic, or the second hand might stop. Replace the AA alkaline battery promptly when this occurs to ensure continuous and accurate timekeeping. Refer to Section 4.1 for battery installation instructions.

7. Troubleshooting

8. Specifications

Figure 5: Size comparison of the wall clock.

9. Warranty and Support

For warranty information, technical support, or service inquiries regarding your RHYTHM Citizen 8MY516-018 Wall Clock, please refer to the warranty card included with your product or contact RHYTHM customer service directly. Contact details can typically be found on the manufacturer's official website or on the product packaging.

Please retain your proof of purchase for any warranty claims.