1. Introduction
Thank you for purchasing the Baseus SW Motion Sensing Vibrating Gamepad. This manual provides detailed instructions for the proper use, setup, and maintenance of your new gamepad. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
The Baseus SW Motion Sensing Vibrating Gamepad (Model: GMSWA-01) is designed for an immersive gaming experience, featuring motion sensing capabilities and vibration feedback. It comes in a transparent black finish, allowing a view of its internal components.
Figure 1: Baseus SW Motion Sensing Vibrating Gamepad. This image shows the transparent black gamepad from an angled perspective, highlighting its internal circuitry and button layout.
2. Key Features
- Model: GS01 / GMSWA-01
- Material: PC (Polycarbonate)
- Color: Transparent Black
- Battery Capacity: 550mAh/3.7V
- Input: Type-C, 5V 550mAh
- Rated Operating Current: 35mA
- Dimensions: 156.2mm x 101.0mm x 64.8mm
- Weight: 207.5g (without packaging)
- Special Features: Motion Sensing, Vibrating Feedback
3. Package Contents
Upon opening the package, please verify that all items are present and in good condition:
- Baseus SW Motion Sensing Vibrating Gamepad (Transparent Black)
- Type-C Charging Cable
- User Manual (this document)
Figure 2: Package contents. The image displays the Baseus gamepad, its retail packaging, and the included Type-C charging cable.
4. Setup and Connection
4.1 Charging the Gamepad
- Locate the Type-C charging port on the gamepad.
- Connect the provided Type-C cable to the gamepad's charging port.
- Connect the other end of the cable to a compatible USB power source (e.g., computer USB port, USB wall adapter).
- The indicator light on the gamepad will illuminate to show charging status. It will turn off or change color when fully charged.
4.2 Pairing with a Device
The Baseus SW Gamepad is designed for use with compatible gaming consoles or devices. Specific pairing instructions may vary slightly depending on your device.
- Ensure the gamepad is sufficiently charged.
- Turn on your gaming console or device.
- On the gamepad, press and hold the pairing button (refer to the button layout diagram in Section 5.1 for location) for a few seconds until the indicator lights begin to flash rapidly. This indicates the gamepad is in pairing mode.
- On your console/device, navigate to the Bluetooth or controller settings and select "Pair New Device" or similar option.
- Select "Baseus SW Gamepad" from the list of available devices.
- Once successfully paired, the indicator lights on the gamepad will stop flashing and remain solid.
Figure 3: Gamepad in use with a gaming console. This image shows a user holding the Baseus gamepad while a Nintendo Switch console is docked and displaying a game.
5. Operating the Gamepad
5.1 Button Layout and Functions
Familiarize yourself with the gamepad's button layout:
| Button/Component | Function |
|---|---|
| Left Analog Stick | Movement, camera control |
| Right Analog Stick | Camera control, aiming |
| D-Pad (Directional Pad) | Menu navigation, specific actions |
| A/B/X/Y Buttons | Action buttons (context-dependent) |
| L/R Buttons | Shoulder buttons |
| ZL/ZR Triggers | Trigger buttons (e.g., shooting, accelerating) |
| Home Button | Return to console home screen |
| Screenshot Button | Capture screenshots |
| Plus (+) / Minus (-) Buttons | Start/Select or menu options |
| Turbo Button (if applicable) | Enables rapid fire for assigned buttons (check specific model features) |
5.2 Motion Sensing
The gamepad features built-in gyroscopes and accelerometers for motion sensing. This allows for intuitive control in games that support motion input. Calibrate the motion sensors if you experience inaccurate tracking by following your console's calibration procedure.
5.3 Vibration Feedback
The gamepad provides haptic feedback through vibrations, enhancing immersion during gameplay. The intensity of vibration is typically controlled by the game or console settings.
6. Care and Maintenance
- Cleaning: Use a soft, dry cloth to wipe the surface of the gamepad. For stubborn dirt, slightly dampen the cloth with water. Do not use harsh chemicals, solvents, or abrasive cleaners.
- Storage: Store the gamepad in a cool, dry place away from direct sunlight and extreme temperatures.
- Handling: Avoid dropping the gamepad or subjecting it to strong impacts, as this can damage internal components.
- Battery Care: To prolong battery life, avoid fully discharging the gamepad frequently. Charge it regularly, even if not in use for extended periods.
7. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Gamepad does not turn on. | Battery is depleted. Charge the gamepad fully. |
| Gamepad does not connect to console/device. |
|
| Buttons or analog sticks are unresponsive. |
|
| Motion sensing is inaccurate. | Recalibrate the motion sensors through your console's settings. |
| Vibration feedback is not working. |
|
8. Product Specifications
| Attribute | Detail |
|---|---|
| Brand | Baseus |
| Model Name | GMSWA-01 (GS01) |
| Material | PC |
| Color | Transparent Black |
| Battery Capacity | 550mAh/3.7V |
| Input | Type-C input 5V 550mAh |
| Rated Operating Current | 35mA |
| Product Dimensions (L x W x H) | 156.2mm x 101.0mm x 64.8mm |
| Product Weight | 207.5g (without packaging) |
| Special Features | Motion Sensing, Vibrating |
9. Warranty Information
Baseus products are manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Baseus website.
10. Customer Support
If you encounter any issues or have questions regarding your Baseus SW Motion Sensing Vibrating Gamepad that are not addressed in this manual, please contact Baseus customer support. You can typically find contact information on the official Baseus website or on the product packaging.
Online Support: Visit the official Baseus website for FAQs, driver downloads, and support resources.
Email Support: Refer to your product's warranty card or the Baseus website for the customer service email address.
