Baseus Encok True Wireless Earphones W07

Introduction

This manual provides detailed instructions for the proper use and maintenance of your Baseus Encok True Wireless Earphones W07. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Package Contents

Upon unboxing, please verify that all items listed below are present:

• Baseus Encok True Wireless Earphones (Left and Right)
• Charging Case
• USB Charging Cable
• User Manual (This document)

Note: The "1 Baseus Branded Product" listed in specifications typically refers to the complete retail package including earphones and case.

Product Overview

Figure 1: Baseus Encok W07 Earphones inside their open charging case, showcasing the sleek black design and the earbuds' form factor.

Figure 2: The charging case with earbuds inserted, displaying a green indicator light, signifying charging status or battery level.

Figure 3: An illustrative internal view of an earbud, showing its electronic components and acoustic structure.

The Baseus Encok W07 earphones consist of two independent earbuds and a portable charging case. The case not only protects the earbuds but also recharges them on the go. An LED indicator on the case provides information about charging status and battery level.

Setup

1. Charging the Charging Case

Before first use, fully charge the charging case. Connect the provided USB charging cable to the charging port on the case and plug the other end into a USB power adapter (not included) or a computer's USB port.

• The indicator light on the case will show charging status.
• A full charge typically takes approximately 1.5 hours.

2. Charging the Earphones

Place the earphones into the charging case. Ensure they are correctly seated in their respective slots (L for left, R for right). The earphones will automatically begin charging.

• The indicator lights on the earphones (if present) or case will indicate charging.
• Earphones typically charge fully within 1 hour when placed in a fully charged case.

3. Pairing with Your Device (Bluetooth)

To connect the earphones to your smartphone or other Bluetooth-enabled device:

1. Ensure the earphones are charged and inside the charging case.
2. Open the charging case lid. The earphones will automatically enter pairing mode (indicator lights may flash).
3. On your device, go to Bluetooth settings and turn Bluetooth ON.
4. Search for available devices. Select "Baseus Encok W07" (or similar name) from the list.
5. Once connected, the earphones will indicate successful pairing (e.g., a voice prompt or steady light).

Note: The earphones will automatically reconnect to the last paired device when taken out of the case, if Bluetooth is enabled on the device.

Operating Instructions

The Baseus Encok W07 earphones feature touch controls for various functions. The specific touch areas are located on the outer surface of each earbud.

Power On/Off

• Power On: Open the charging case lid, or take the earphones out of the case. They will power on automatically.
• Power Off: Place the earphones back into the charging case and close the lid. They will power off automatically.
• Manual Power Off: (If supported) Long press the touch area for approximately 5 seconds.

Music Playback Control

• Play/Pause: Single tap on either earbud.
• Next Track: Double tap on the right earbud.
• Previous Track: Double tap on the left earbud.
• Volume Up: Triple tap on the right earbud.
• Volume Down: Triple tap on the left earbud.

Call Management

• Answer/End Call: Single tap on either earbud during an incoming call or active call.
• Reject Call: Long press on either earbud for approximately 2 seconds during an incoming call.

Voice Assistant

• Activate Voice Assistant: Long press on either earbud for approximately 3 seconds (e.g., Siri, Google Assistant).

Figure 4: A user demonstrating the comfortable and secure fit of the Baseus Encok W07 earbud during daily activities, such as driving.

Maintenance

Proper maintenance ensures the longevity and optimal performance of your Baseus Encok W07 earphones.

• Cleaning: Regularly clean the earbuds and charging case with a soft, dry, lint-free cloth. Do not use harsh chemicals, cleaning solvents, or strong detergents. For ear tips, gently wipe with a slightly damp cloth and ensure they are completely dry before reattaching.
• Storage: When not in use, always store the earphones in their charging case to protect them from dust, dirt, and physical damage. Store in a cool, dry place away from extreme temperatures.
• Battery Care: To preserve battery life, avoid fully discharging the earphones and charging case frequently. Charge them regularly, even if not in constant use. Avoid leaving them uncharged for extended periods.
• Water Resistance: The product is listed as "Waterproof." While this indicates a degree of protection against water ingress, it is not designed for submersion. Avoid exposing the earphones to excessive moisture, rain, or sweat for prolonged periods. Dry them thoroughly if they get wet before placing them back in the charging case.

Troubleshooting

If you encounter issues with your Baseus Encok W07 earphones, please refer to the following common solutions:

Specifications

The following are the technical specifications for the Baseus Encok True Wireless Earphones W07:

Warranty and Support

Baseus products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Baseus website. Keep your proof of purchase for warranty claims.

For further assistance, you may also contact the retailer from whom you purchased the product.