Avidsen Skyda 100757 Infrared Motion Sensor User Manual

1. Introduction

The Avidsen Skyda 100757 Infrared Motion Sensor is designed to enhance the security of your premises by detecting unauthorized movement. This device is ideal for integrating into an existing alarm system to protect a room from intruders. Upon detection, it can trigger an integrated siren and transmit an audible signal from a distance. This manual provides essential information for the proper installation, operation, and maintenance of your motion sensor.

2. Safety Information

Please read all safety instructions carefully before using the device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Battery Safety: Use only the specified battery type (2 x 1.5V AA batteries). Ensure correct polarity when inserting batteries. Do not mix old and new batteries, or different types of batteries. Remove batteries if the device will not be used for an extended period. Dispose of used batteries responsibly according to local regulations.
• Placement: Install the sensor in a dry indoor location, away from direct sunlight, heat sources, and strong electromagnetic fields. Avoid placing it near windows or vents where drafts could cause false alarms.
• Cleaning: Do not use liquid cleaners or aerosol cleaners. Use a soft, dry cloth for cleaning.
• Repair: Do not attempt to repair or modify the device yourself. Refer all servicing to qualified personnel.

3. Product Overview

The Avidsen Skyda 100757 motion sensor is a compact, white unit designed for discreet placement. It features an infrared detection window on the front and a battery compartment and mounting point on the rear.

This image displays the front of the Avidsen motion sensor, highlighting its white casing, the infrared detection lens, and the Avidsen brand name at the bottom. A small indicator light is visible above the logo.

This image shows the back of the motion sensor. A label is clearly visible, detailing "Avidsen MOTION DETECTOR", "Reference: 100757", "2xAA 1.5V LR6", "RF: 433MHz", and "Made in PRC". There is also a small circular indentation and a battery compartment latch.

This composite image displays the motion sensor from various angles, with blue arrows indicating the horizontal and vertical detection coverage. It visually represents the 110-degree detection angle and the 8-meter detection distance.

Key Features:

• Detection distance: up to 8 meters in open field.
• Detection angle: up to 110 degrees.
• Power source: 2 x 1.5V AA batteries (included).
• Bi-directional communication for enhanced system integration.
• Wireless range in open field: up to 100 meters.

4. Setup

4.1. Battery Installation

1. Locate the battery compartment on the rear of the motion sensor.
2. Open the battery compartment cover.
3. Insert two (2) 1.5V AA batteries, ensuring correct polarity (+/-). The batteries are included with the product.
4. Close the battery compartment cover securely.

4.2. Mounting the Sensor

The sensor is designed for wall mounting (Wandmontage).

1. Choose a suitable location for installation. For optimal performance, place the sensor in a corner or on a wall where it can cover the desired area without obstruction. Avoid placing it directly facing windows or heat sources.
2. Use the provided mounting bracket or screw hole on the back of the sensor (refer to Figure 3.2 and 3.3 for mounting point).
3. Secure the sensor firmly to the wall using appropriate screws and wall plugs (not included unless specified).
4. Adjust the sensor's angle to ensure optimal detection coverage within its 110-degree angle and 8-meter range.

4.3. System Integration

This motion sensor is designed for integration with compatible Avidsen alarm systems (e.g., Ref. 100725, 100728). Refer to your alarm system's manual for specific pairing instructions. The sensor utilizes bi-directional communication and operates on a 433MHz RF frequency.

5. Operating the Sensor

Once installed and paired with your alarm system, the Avidsen Skyda 100757 motion sensor operates automatically.

• Detection: The infrared sensor detects changes in heat signatures within its detection zone (up to 8 meters, 110-degree angle).
• Alarm Trigger: Upon detecting motion, the sensor transmits a signal to the connected alarm system. Depending on your system's configuration, this will trigger the integrated siren and/or other associated accessories (e.g., external sirens).
• Indicator Light: A small LED indicator on the front of the sensor may flash to indicate detection or low battery status. Refer to your alarm system's manual for specific indicator light behaviors.

6. Maintenance

6.1. Cleaning

To maintain optimal performance, keep the sensor's detection window clean. Use a soft, dry, lint-free cloth to gently wipe the surface. Do not use abrasive cleaners, solvents, or spray directly onto the device.

6.2. Battery Replacement

When the batteries are low, the sensor or your connected alarm system will typically provide an indication. Replace both AA batteries simultaneously to ensure consistent power. Follow the battery installation steps outlined in Section 4.1.

7. Troubleshooting

8. Specifications

9. Warranty and Support

Specific warranty information for the Avidsen Skyda 100757 Infrared Motion Sensor is not provided in this manual. Please refer to the product packaging, your purchase receipt, or the official Avidsen website for detailed warranty terms and conditions.

For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding compatible alarm systems, please contact Avidsen customer service or visit their official support channels. Contact information can typically be found on the manufacturer's website or product packaging.