Introduction
Thank you for choosing the Marathon Bluetooth Controlled Designer Panoramic Wall Clock. This digital clock is designed for convenience, offering self-setting and self-adjusting time synchronization via Bluetooth connectivity with your smartphone. It features a clear display, alarm functions, and can be used as both a wall-mounted or desk clock.
This manual provides essential information for setting up, operating, maintaining, and troubleshooting your new clock to ensure long-lasting and accurate performance.
Package Contents
- Marathon Bluetooth Controlled Designer Panoramic Wall Clock
- Instruction Manual
- Batteries (pre-installed or included separately)
Product Overview
The Marathon Bluetooth Clock features a large, easy-to-read digital display and a sleek design suitable for various environments. Its primary functions are controlled via a dedicated smartphone application.
Figure 1: Front view of the Marathon Bluetooth Controlled Designer Panoramic Wall Clock.
The clock's rear panel houses essential controls and the battery compartment.
Figure 2: Rear view of the clock with key components labeled.
Key Components:
- Digital Display: Shows time, day, date, and other indicators.
- Alarm ON/OFF Button: Activates or deactivates the alarm.
- Snooze Button: Temporarily silences the alarm.
- Bluetooth Pair Button: Initiates Bluetooth pairing mode.
- Scroll Button: Used for navigating settings (primarily for manual adjustments if app is not used).
- Reset Button: Resets the clock to factory defaults.
- Fold-out Stand: Allows the clock to stand on a flat surface.
- Battery Compartment: Houses the power source.
Setup
1. Battery Installation
- Locate the fold-out stand on the back of the clock. Pull it down to access the battery compartment.
- Open the battery compartment cover.
- Insert the required batteries (typically 2x AA or 4x AA, refer to the battery compartment label for exact type and quantity) ensuring correct polarity (+/-).
- Close the battery compartment cover and fold the stand back into place if wall-mounting, or leave it extended for desk use.
2. App Installation and Bluetooth Pairing
The Marathon clock is designed to be controlled and synchronized via a dedicated smartphone application. Search for the official Marathon clock app on your device's app store (e.g., Apple App Store for iOS or Google Play Store for Android).
- Download and install the Marathon clock application on your smartphone or tablet.
- Ensure Bluetooth is enabled on your smartphone.
- Open the Marathon clock app. Follow the on-screen instructions to add a new device.
- On the clock, press and hold the Bluetooth Pair button (refer to Figure 2) until the Bluetooth icon on the clock's display starts flashing, indicating it is in pairing mode.
- Select the Marathon clock from the list of available devices in your app.
- Once paired, the clock's time and date will automatically synchronize with your smartphone's time. The Bluetooth icon on the clock's display will become solid.
Figure 3: Clock dimensions for placement reference.
Operation
Time Synchronization
After successful Bluetooth pairing, the clock will automatically set its time and date based on your smartphone. It is designed to self-adjust for Daylight Saving Time (DST) changes if enabled in the app settings.
Setting Alarms
Alarms are primarily set and managed through the Marathon clock application. Open the app, navigate to the alarm settings, and follow the prompts to set desired alarm times, days, and tones.
- To activate or deactivate an alarm directly on the clock, press the Alarm ON/OFF button on the rear panel.
Using the Snooze Function
When an alarm sounds, press the Snooze button on the rear panel to temporarily silence the alarm. The alarm will sound again after a preset snooze interval (typically 5-10 minutes, configurable via the app).
Display Modes
The clock's display shows the current time (12 or 24-hour format), day of the week, and date. Some models may also display indoor temperature and humidity. Display preferences can often be customized through the smartphone application.
Maintenance
- Cleaning: Wipe the clock's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, which may damage the display or casing.
- Battery Replacement: Replace batteries when the display dims or the clock stops functioning. Always replace all batteries at the same time with new ones of the same type. Dispose of old batteries responsibly.
- Storage: If storing the clock for an extended period, remove the batteries to prevent leakage and damage.
Troubleshooting
| Problem | Solution |
|---|---|
| Clock does not power on or display is dim. | Check battery installation. Ensure batteries are new and inserted with correct polarity. Replace batteries if necessary. |
| Clock does not synchronize with smartphone. | Ensure Bluetooth is enabled on your smartphone and the clock is in pairing mode. Make sure the clock is within Bluetooth range. Try restarting the app or your phone. If issues persist, try unpairing and re-pairing the device. |
| Time is incorrect or does not adjust for DST. | Verify that the clock is successfully paired with the app. Check app settings for time zone and Daylight Saving Time preferences. Ensure your phone's time is correct. |
| Poor battery life. | Ensure you are using high-quality alkaline batteries. Frequent use of certain features or constant Bluetooth connection attempts may consume more power. |
| Display is difficult to read from certain angles. | This may be a characteristic of the LCD display. Try adjusting the viewing angle or lighting conditions in the room. |
| Cannot connect multiple devices to the clock. | The clock is designed to pair with one controlling device at a time. To connect a different device, the current connection must be disconnected or forgotten. |
Specifications
| Feature | Detail |
|---|---|
| Brand | MARATHON |
| Model Number | CL800001GH |
| Display Type | Digital |
| Connectivity Technology | Bluetooth |
| Power Source | Battery Powered (Batteries Included) |
| Special Features | Alarm, Self-Setting, Self-Adjusting |
| Mounting Type | Wall Mount, Desk Stand |
| Product Dimensions | 8.5 x 3 x 13 inches (approximate) |
| Item Weight | 1 Pound |
| Color | Black |
| Material | Plastic |
Warranty Information
Marathon products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Marathon website. Keep your purchase receipt as proof of purchase for any warranty claims.
Support
For further assistance, technical support, or inquiries regarding your Marathon Bluetooth Controlled Designer Panoramic Wall Clock, please visit the official Marathon website or contact their customer service department.
Website: www.marathonwatch.com
Phone: 1-800-822-4323 (as indicated on product image, verify for current support)
