Atrend E8DV
Atrend Bbox E8DV 8-inch Dual Vented-Divided Subwoofer Enclosure Instruction Manual
Model: E8DV | Brand: Atrend
Introduction
The Atrend Bbox E8DV 8-inch Dual Vented-Divided Subwoofer Enclosure is engineered to deliver optimal bass response and low-frequency reproduction, ideal for enhancing your car audio system. This manual provides essential information for the proper setup, operation, and maintenance of your subwoofer enclosure.
Image: Atrend Bbox E8DV 8-inch Dual Vented-Divided Subwoofer Enclosure, showcasing its dual speaker cutouts and vented design.
Video: Product Overview Video showing the Atrend Bbox E8DV subwoofer enclosure from various angles, highlighting its features and construction. This video provides a visual guide to the enclosure's design.
What's in the Box
- 1 x Atrend Bbox E8DV 8-inch Dual Vented-Divided Subwoofer Enclosure
Note: Subwoofers, wiring, and mounting hardware are sold separately.
Key Features
- Dual 8-inch Vented Divided Design: Engineered for optimum bass response and low frequency reproduction, suitable for lower profile sound quality subwoofers.
- Airtight Construction: Utilizes aliphatic wood glue and brad nails for an airtight seal, preventing leaks and rattles, and improving overall sound quality.
- High-Grade MDF: Constructed from durable, thick MDF for solid frequency response and accurate music reproduction. CNC Miter ensures an airtight fit.
- Dado Design: Offers a precision fit for car subwoofer boxes and enclosures, ensuring a rattle and noise-free environment.
- Tuning Frequency: 32Hz for deep bass.
Setup and Installation
Proper installation is crucial for optimal performance and longevity of your subwoofer enclosure. Follow these general guidelines for setup:
1. Preparing the Enclosure
Ensure the enclosure is clean and free of debris. The internal wiring terminals are pre-installed. For a secure connection, it is recommended to use crimp-on ring terminals for your speaker wire rather than wrapping bare wire around the bolts.
2. Installing Subwoofers
- Connect your subwoofer's positive terminal to the positive terminal inside the enclosure, and the negative to negative. Ensure connections are secure.
- Carefully place each 8-inch subwoofer into its respective cutout.
- Secure the subwoofers using appropriate wood screws. Exercise caution to avoid screwing through the subwoofer's surround. MDF is soft, so screws will go in easily.
- (Optional) Install speaker grills over the subwoofers for protection, especially if the enclosure will be in a high-traffic area like a car trunk.
3. Placement in Vehicle
Consider the dimensions of the enclosure (16.25"D x 24"W x 10.5"H) to ensure proper fit in your vehicle's trunk or cargo area. To prevent the enclosure from sliding, you may apply self-adhesive Velcro strips to the bottom surface of the enclosure. The hook side of the Velcro will grip the carpet in your trunk, providing stability.
Image: Atrend Bbox E8DV Subwoofer Enclosure with dimensions labeled: 10.5" Height, 16.25" Depth, 24" Width. This image helps in planning the placement within a vehicle.
Operating Instructions
Once your subwoofers are securely installed in the enclosure and connected to your amplifier, ensure your amplifier settings are correctly configured for the impedance and power handling of your subwoofers. Refer to your amplifier's manual for specific settings. Gradually increase volume and bass levels to allow the subwoofers to break in and to prevent damage.
Maintenance
- Cleaning: Use a soft, dry cloth to wipe down the exterior of the enclosure. Avoid using harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all connections (speaker wires, terminals, mounting screws) to ensure they remain tight and secure. Loose connections can lead to poor sound quality or damage.
- Environment: Keep the enclosure in a dry environment, away from extreme temperatures and direct sunlight, to preserve the MDF and carpet finish.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound from Subwoofers | Loose wiring connections; Amplifier off or in protect mode; Incorrect amplifier settings. | Check all wiring connections to the enclosure and amplifier. Verify amplifier power and settings. |
| Distorted Bass | Gain too high on amplifier; Incorrect crossover settings; Damaged subwoofer. | Adjust amplifier gain and crossover settings. Inspect subwoofers for physical damage. |
| Rattling Noise | Loose subwoofer mounting screws; Objects inside the enclosure; Enclosure not stable. | Tighten subwoofer screws. Check inside the enclosure for foreign objects. Secure the enclosure in the vehicle. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Bbox E8DV 8" Dual Vented |
| Material | High Grade MDF |
| Subwoofer Diameter | 8 Inches |
| Product Dimensions (D x W x H) | 16.25" x 24" x 10.5" |
| Item Weight | 28 Pounds |
| Tuning Frequency | 32 Hz |
| Recommended Uses | For Car Audio Systems |
| Connectivity Technology | Wired |
| UPC | 636644603873 |
Warranty and Support
This Atrend Bbox Subwoofer Enclosure comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the official Atrend website or contact their customer service directly. Keep your purchase receipt for warranty validation.
For additional information and product registration, visit the Atrend Store on Amazon.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.