Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Nuvo Lighting Laguna 6-Light Caged Pendant, model 60/5877. Please read this manual thoroughly before beginning installation and retain it for future reference.
The Nuvo Lighting Laguna pendant features a transitional style with a brushed nickel finish, designed for indoor use. It accommodates six candelabra base bulbs (not included) with a maximum wattage of 60W per bulb, operating at 120 volts.
Safety Information
WARNING: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing.
CAUTION: All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). If you are unfamiliar with proper electrical wiring connections, obtain the services of a qualified electrician.
- Ensure the fixture is securely mounted to a structural element.
- Do not exceed the maximum wattage specified for the bulbs.
- This fixture is rated for dry locations only. Do not install in damp or wet environments.
- Handle glass components with care to prevent breakage.
Package Contents
Verify that all parts listed below are included in your package. If any parts are missing or damaged, contact Nuvo Lighting customer service before proceeding with installation.
- Pendant Fixture Assembly
- Mounting Hardware (Crossbar, Mounting Screws, Wire Nuts)
- Canopy
- Downrod(s) (if applicable for adjustable height)
- Instruction Manual
Image 1: The Nuvo Lighting Laguna 6-Light Caged Pendant, showcasing its brushed nickel finish and open cage design.
Setup and Installation
- Turn Off Power: Before starting, ensure the power to the circuit you are working on is turned off at the circuit breaker or fuse box.
- Prepare Mounting: Attach the mounting crossbar to the outlet box using the provided mounting screws. Ensure the crossbar is securely fastened.
- Adjust Height (if applicable): If your pendant includes adjustable downrods, determine the desired hanging height and assemble the downrods accordingly.
- Wire Connections: Connect the fixture's wires to the supply wires from the outlet box using the wire nuts. Connect the black (hot) fixture wire to the black (hot) supply wire, the white (neutral) fixture wire to the white (neutral) supply wire, and the bare copper (ground) fixture wire to the green or bare copper (ground) supply wire. Ensure all connections are secure.
- Secure Fixture: Carefully tuck the wires into the outlet box. Raise the canopy to the ceiling and secure it to the mounting crossbar using the provided screws or nuts.
- Install Bulbs: Screw six candelabra base bulbs (Type B, max 60W each, not included) into the sockets. Do not overtighten.
Image 2: The Nuvo Lighting Laguna Pendant with key dimensions, showing a height of 32.75 inches and a width of 17 inches.
Operating Instructions
Once installation is complete and all connections are secure, restore power at the circuit breaker or fuse box. The fixture is now ready for use. Operate the light using your standard wall switch.
This fixture is designed for general purpose indoor lighting. For optimal performance and longevity, use recommended bulb types and wattages.
Image 3: The Nuvo Lighting Laguna Pendant installed in a modern kitchen and dining area, demonstrating its aesthetic appeal and illumination.
Maintenance
Regular maintenance will help preserve the appearance and functionality of your Nuvo Lighting pendant.
- Cleaning: To clean the fixture, turn off the power and allow it to cool. Wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Ensure power is off before replacing bulbs. Allow old bulbs to cool before removal. Replace with new candelabra base bulbs (Type B) of the specified wattage (max 60W).
- Inspection: Periodically inspect wiring and connections for any signs of wear or damage. If any issues are found, consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | No power to the fixture. Loose wire connections. Faulty bulb. | Check circuit breaker/fuse. Verify all wire connections are secure (power off). Replace bulb. |
| Light flickers. | Loose bulb. Incorrect bulb type/wattage. Loose wire connection. | Tighten bulb. Ensure correct bulb type and wattage are used. Check wire connections (power off). |
| Fixture hums. | Incompatible dimmer switch. | Ensure dimmer switch is compatible with incandescent/LED bulbs (if applicable). Consult an electrician. |
Specifications
- Model: 60/5877
- Brand: Nuvo Lighting
- Style: Transitional, 6 Light Caged Pendant
- Finish: Brushed Nickel
- Material: Metal, Glass
- Dimensions: Approximately 17 inches (Width) x 32.75 inches (Height)
- Number of Lights: 6
- Bulb Type: Candelabra Base (Type B)
- Max Wattage: 60W per bulb
- Voltage: 120 Volts
- Safety Rating: UL Listed for Dry Locations
- Assembly Required: Yes
- Item Weight: 5 pounds
Warranty Information
Nuvo Lighting provides a 1-year limited warranty on this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
For detailed warranty terms and conditions, please refer to the official Nuvo Lighting website or contact customer support.
Customer Support
If you have any questions, require assistance with installation, or need to report a missing/damaged part, please contact Nuvo Lighting customer support.
For more information and product details, you may visit the official Nuvo Lighting store: