1. Introduction
This manual provides instructions for the safe and efficient use of your Kastar KLIC-7001 compatible battery and LCD Slim USB Charger. Please read this manual thoroughly before use and retain it for future reference.
The Kastar charger is designed to charge compatible camera batteries, featuring an intelligent LCD display for monitoring charging status and battery capacity. The kit includes two high-capacity batteries designed for extended life without memory effect.
Image 1.1: Kastar KLIC-7001 Battery and LCD Slim USB Charger.
2. Safety Information
CAUTION: Make sure you observe the following important battery precautions. Failure to do so can cause batteries to leak, overheat, or explode.
- Never expose batteries to heat or fire.
- Never try to disassemble, modify, or apply solder to batteries.
- Never short the terminals of the batteries or carry them together with metal objects that can cause shorting.
- Do not tear or remove the outer label of the batteries.
- Never use, charge, or store batteries in areas exposed to high temperature.
- Keep out of reach of children.
- Do not immerse the charger in water. Use in dry locations only.
- Do not open or modify the charger.
- Use only compatible batteries with this charger.
Image 2.1: Kastar KLIC-7001 Battery showing safety warnings on its label.
3. Setup
3.1 Unpacking
Carefully remove the charger and batteries from their packaging. Inspect all components for any signs of damage. If any part is damaged, do not use it and contact customer support.
Image 3.1: Kastar Battery and Charger Packaging.
3.2 Charger Overview
The Kastar LCD Slim USB Charger is compact and features an LCD screen to display charging progress. It is designed for ease of portability and use with various USB power sources.
Image 3.2: Kastar LCD Slim USB Charger with approximate dimensions (3.5 inches length, 1.75 inches width, 0.7 inches thickness).
4. Operating Instructions
4.1 Charging a Battery
- Connect the Charger: Plug the Micro USB cable into the charger's input port and connect the other end to a suitable USB power source (e.g., laptop, AC adapter, car charger, power bank). The charger requires a 5V 2A input.
- Insert the Battery: Align the battery contacts with the charger's pins. Ensure the battery is inserted correctly according to the polarity markings (+/-). The intelligent LCD display will activate and show the current charging status and battery capacity.
- Monitor Charging: The LCD screen will display the charging progress. Once the battery is fully charged, the display will indicate a full battery icon.
- Remove Battery: Once charging is complete, carefully remove the battery from the charger and disconnect the charger from the power source.
Image 4.1: The intelligent LCD display shows charging status and battery capacity. The charger can be powered by various USB sources including a laptop, AC adapter, car charger, or power bank.
4.2 LCD Display Indicators
The LCD display provides visual feedback on the battery's charge level:
| Indicator Status | Power Ratio | Statements |
|---|---|---|
| Empty Battery Icon | No power | No power |
| One Bar | 6%---25% | One LED on |
| Two Bars | 26%---50% | Two LED on |
| Three Bars | 51%---75% | Three LED on |
| Four Bars | 76%---100% | Four LED on |
5. Maintenance
- Cleaning: Use a soft, dry cloth to clean the charger and batteries. Do not use liquid cleaners or solvents.
- Storage: Store the charger and batteries in a cool, dry place away from direct sunlight and extreme temperatures. For long-term storage, ensure batteries are partially charged (around 50%) to maintain battery health.
- Battery Care: Avoid fully discharging the batteries frequently. While these batteries are designed with no memory effect, optimal performance is maintained with regular charging cycles.
6. Troubleshooting
6.1 Charger Not Powering On
- Ensure the USB cable is securely connected to both the charger and the power source.
- Verify that the USB power source is active and providing power (e.g., try a different USB port or wall adapter).
- Check the USB cable for any damage. Try using a different Micro USB cable if available.
6.2 Battery Not Charging
- Ensure the battery is inserted correctly into the charger with the contacts aligned.
- Check the battery contacts and charger pins for any dirt or obstruction. Clean gently if necessary.
- Confirm the battery is compatible with the charger (Kodak KLIC-7001 or equivalent).
- If the battery is severely depleted, it may take a few minutes for the charger to register and begin charging.
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Kastar |
| Model Number | 4331964366 |
| Input Voltage | 5 Volts (2A) |
| Output Voltage | 4.2V/8.4V |
| Current Rating | 600mA |
| Connector Type | Micro USB |
| Number of Ports | 1 (for charging one battery at a time) |
| Item Weight | 0.01 Ounces |
| Certifications | CE, FCC, RoHS |
| Compatible Battery Model | Kodak KLIC-7001, BenQ D-Li213 |
| Compatible Camera Models | Kodak EasyShare M320, M340, M341, M753 Zoom, M763, M853 Zoom, M863, M893 IS, M1063, M1073 IS, MD1063, MD41, MD853, MD863, MX1063, V550, V570, V610, V705, V750, Benq DC E1050, E1050T, E1220, E1220T, L1050, DXG-588V, DXG-599V, DXG-5C0V, DXG-5C1V, DXG-5C8V, Agfa Optima 1338, 1338mt, 2338, 2338mt, MEDION Life P47350, S47000, X47006, MD85416, MD85562, MD86063, MD86084, MD86288, MD86390, POLAROID T10035, T1031, T-1031, T1035, T-1035, T1232, T1234, T-1234, T1235, T-1235, PRAKTICA DMMC3D, DMMC-3D, LM 10-TS, LM 12-TS, RICOH HD-TD910, T1200, T-1200, ZUP120, ZUP-120, ROLLEI CL200, CL-200, Compactline 200, DA101, DA-101. |
8. Warranty and Support
8.1 Warranty Information
Kastar products are covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the product packaging or the official Kastar website for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
8.2 Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact Kastar customer support. Contact information can typically be found on the product packaging or the official Kastar website.
Note: This manual is for informational purposes only. Product specifications and features may change without prior notice.