1. Introduction
The iDevices Socket is a Wi-Fi enabled light bulb adapter designed to transform any standard light fixture into a smart light. It allows you to control the power and brightness of your light bulbs remotely, create schedules, and utilize voice commands through compatible smart home platforms such as Apple HomeKit, Amazon Alexa, and Google Assistant. The adapter also features a customizable LED light ring for ambient lighting.
This device supports standard Edison bulbs up to 60 watts, including LED, CFL, incandescent, and halogen types. For dimming functionality, a dimmable bulb is required.
Figure 1.1: The iDevices Socket Wi-Fi Light Bulb Adapter.
2. Safety Information
- Indoor Use Only: This product is designed for indoor use in dry locations. Do not expose to water or moisture.
- Power Rating: Do not exceed the maximum load of 60 watts. Overloading may cause damage to the device or create a fire hazard.
- Bulb Compatibility: Ensure the light bulb used is compatible with the iDevices Socket. For dimming features, use a dimmable bulb.
- Installation: Always ensure power is off at the switch before installing or removing the iDevices Socket or any light bulb.
- Clearance: Ensure adequate clearance around the installed socket and bulb within the lamp shade or fixture. The socket is compatible with standard light bulbs with a minimum lamp harp size of 8.5 inches.
3. Package Contents
Verify that all items are present in your package:
- iDevices Socket Wi-Fi Light Bulb Adapter
- Installation & Setup Instructions (this manual)
4. Setup
4.1. Physical Installation
- Power Off: Ensure the power to your light fixture is turned off at the wall switch or circuit breaker before beginning installation.
- Screw in Socket: Carefully screw the iDevices Socket into your existing light fixture's bulb socket. Do not overtighten.
- Install Light Bulb: Screw a standard light bulb (up to 60 watts) into the iDevices Socket. For dimming functionality, ensure the bulb is dimmable.
Figure 4.1: A user screwing a light bulb into the iDevices Socket.
Figure 4.2: The iDevices Socket installed within a lamp fixture.
4.2. App Connection and Configuration
- Download App: Download the free iDevices Connected app from the Apple App Store or Google Play Store on your smartphone or tablet.
- Power On: Turn on the power to your light fixture. The iDevices Socket's LED ring should illuminate.
- Open App: Launch the iDevices Connected app and follow the on-screen instructions to add your new Socket. You will typically be prompted to scan a unique code provided with your device.
- Connect to Wi-Fi: The app will guide you through connecting the Socket to your home Wi-Fi network. No hub is required.
- Name Device: Assign a name to your iDevices Socket (e.g., "Living Room Lamp") for easy identification and voice control.
Figure 4.3: Controlling the iDevices Socket via the iDevices Connected app.
Video 4.1: Official manufacturer video demonstrating the setup and features of the iDevices Socket.
5. Operating Instructions
5.1. Remote Control and Dimming
Once connected to the iDevices Connected app, you can control your light from anywhere with an internet connection. Use the app to turn the light on or off, and adjust its brightness. The dimming feature allows you to set the perfect ambiance for any situation, provided you are using a dimmable light bulb.
5.2. Scheduling
Create custom schedules within the iDevices Connected app to automate your lighting. You can set lights to turn on or off at specific times, or based on your daily routine. This feature can also help save energy by ensuring lights are only on when needed.
5.3. Voice Control
The iDevices Socket is compatible with Apple HomeKit, Amazon Alexa, and Google Assistant. After linking your iDevices account with these platforms, you can use voice commands to control your lights. For example, say "Hey Siri, turn on the living room lamp" or "Alexa, dim the bedroom light to 50%."
Figure 5.1: The iDevices Socket integrates with various smart home ecosystems, including Amazon Alexa.
5.4. Customizable LED Light Ring
The iDevices Socket features a customizable LED light ring. Use the iDevices Connected app to change the color of this ring, adding ambient lighting or a night light function to your space. This LED ring can be controlled independently of the main light bulb.
6. Maintenance
- Cleaning: Ensure the device is unplugged and the light fixture is off before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Firmware Updates: Periodically check the iDevices Connected app for available firmware updates to ensure optimal performance and security.
- Bulb Replacement: Always turn off power to the fixture before replacing a light bulb.
7. Troubleshooting
| Issue | Possible Cause / Solution |
|---|---|
| Device not connecting to Wi-Fi / App | Ensure your Wi-Fi network is 2.4GHz (5GHz is not supported). Verify correct Wi-Fi password. Move the device closer to your Wi-Fi router. Try resetting the Socket (refer to manufacturer's instructions for reset procedure, usually a button press). |
| Light not dimming | Confirm that the installed light bulb is explicitly labeled as dimmable. Not all LED or CFL bulbs are dimmable. |
| Voice control not working | Ensure your iDevices account is correctly linked to Apple HomeKit, Amazon Alexa, or Google Assistant. Verify the device name used in voice commands matches the name set in the app. Check internet connection for your voice assistant device. |
| LED ring not changing color | Ensure you are using the iDevices Connected app to adjust the LED ring color. Check for app updates. |
| Socket does not fit in fixture | The Socket requires a minimum lamp harp size of 8.5 inches. Verify your fixture provides adequate space. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | IDEV0002ANP5 |
| Brand | iDevices |
| Connectivity | Wi-Fi (2.4GHz only) |
| Control Method | App (iDevices Connected), Voice (Apple HomeKit, Amazon Alexa, Google Assistant) |
| Light Type Support | LED, CFL, Incandescent, Halogen |
| Max Wattage | 60 watts |
| Voltage | 120 volts |
| Bulb Base | E26 (Standard Edison) |
| Special Features | Customizable LED light ring, Dimming capability (with dimmable bulb) |
| Indoor/Outdoor Usage | Indoor Use Only |
| Material Type | Copper |
9. Warranty and Support
For detailed warranty information and customer support, please refer to the official iDevices website or contact their customer service directly. Warranty terms and conditions may vary and are typically provided with your purchase documentation.
Online Support: Visit the iDevices support page for FAQs, troubleshooting guides, and contact options.
Manufacturer: iDevices