Introduction
This manual provides essential information for the safe and effective use of your UpBright 2-Pin 29V AC/DC Adapter. This power supply is designed for compatibility with Okin Refined Electric Technology Co., Ltd. models, specifically the 02-290018, JLDP.10.025.000, and JLDP.10.022.000 series, commonly found in lift chairs and recliners. It delivers a stable DC 29.0V at 1.8A, providing 52.2W of power. Please read this manual thoroughly before operation.
Figure 1: The UpBright 2-Pin 29V AC/DC Adapter. This image displays the main power adapter unit with its attached DC output cable and the separate AC input power cord. The adapter features safety certifications and input/output specifications printed on its label.
Safety Precautions
- Ensure the adapter's input voltage (100-240VAC, 50/60Hz) matches your local power supply.
- Do not expose the adapter to water, moisture, or extreme temperatures.
- Avoid dropping or subjecting the adapter to strong impacts.
- Do not attempt to open or modify the adapter. Refer all servicing to qualified personnel.
- Disconnect the power supply from the wall outlet before cleaning or if not in use for extended periods.
- This adapter is designed for indoor use only.
Setup
- Identify the Correct Adapter: Verify that the model number on your existing power supply or the device requiring power matches the specifications of this UpBright adapter (Model: 02-290018, JLDP.10.025.000, JLDP.10.022.000).
- Connect the AC Power Cord: Insert the 2-prong AC power cord into the input receptacle on the UpBright adapter. Ensure a firm connection.
- Connect to Device: Plug the DC output connector of the UpBright adapter into the corresponding power input port on your Okin-compatible lift chair or recliner. The connector is a 2-pin type.
- Plug into Wall Outlet: Insert the AC power cord's plug into a standard wall outlet (100-240VAC, 50/60Hz).
Figure 2: Close-up of the 2-pin DC output connector. This image highlights the specific 2-pin connector type used by the adapter, which is crucial for compatibility with Okin Refined Electric Technology devices.
The adapter is designed with Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure safe operation and protect your connected device.
Operating Instructions
Once properly connected, the UpBright AC/DC adapter will supply continuous power to your compatible device. No further user interaction is typically required for its operation. The adapter functions as a direct power source for your lift chair or recliner.
- Ensure all connections are secure before operating your device.
- If the device does not power on, check all connections and the wall outlet.
- The adapter is designed for continuous use within its specified parameters.
Maintenance
The UpBright AC/DC adapter requires minimal maintenance to ensure longevity and optimal performance.
- Cleaning: Disconnect the adapter from the power source and the device. Use a soft, dry cloth to wipe the exterior of the adapter. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the adapter in a cool, dry place away from direct sunlight and extreme temperatures. Avoid tightly coiling the cables to prevent damage.
- Cable Inspection: Periodically inspect the AC input cord and the DC output cable for any signs of damage, fraying, or exposed wires. If damage is observed, discontinue use immediately and replace the adapter.
Troubleshooting
If you encounter issues with your UpBright AC/DC adapter, refer to the following common troubleshooting steps:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. |
|
|
| Adapter feels excessively hot. |
|
|
| Intermittent power. |
|
|
If the problem persists after attempting these solutions, please contact UpBright customer support.
Specifications
| Feature | Detail |
|---|---|
| Brand | UPBRIGHT |
| Model Number | Okin 02-290018 DC 29.0V 1.8A Power (Compatible with JLDP.10.025.000, JLDP.10.022.000) |
| Input Voltage | 100-240VAC, 50/60Hz |
| Output Voltage | DC 29.0V |
| Output Current | 1.8A (1800mA) |
| Output Power | 52.2W |
| Connector Type | 2-Prong Connector (DC Output) |
| Protection Features | OVP (Over Voltage Protection), OCP (Over Current Protection), SCP (Short Circuit Protection) |
| Product Dimensions | 6 x 4 x 2 inches (approximate) |
| Item Weight | 10 ounces (approximate) |
| Included Components | 1x AC/DC Adapter, 1x AC Power Cord |
Figure 3: The UpBright adapter is supplied with an appropriate AC power cord for your region. This image illustrates different types of AC power cords (US, EU, UK, AU) that may be included, along with a representation of the UpBright Limited Warranty Certificate.
Warranty and Support
UpBright products are designed for reliability and performance. This adapter comes with a warranty to ensure your satisfaction.
- Refund Policy: UpBright offers a 30-day refund policy from the date of purchase.
- Exchange Policy: A 24-month exchange policy is provided for defective units.
- For warranty claims, technical support, or any inquiries, please refer to the contact information provided with your product or visit the official UpBright store.
- You can visit the UPBRIGHT Store on Amazon for more information.
