Introduction
This manual provides essential instructions for the safe and efficient use of your Rayovac 4-Position AA/AAA Battery Charger. This compact charger is designed to keep your rechargeable AA and AAA batteries ready for use in various digital devices. It includes two AA and two AAA rechargeable batteries.
The charger is compatible with Nickel-Metal Hydride (NiMH) batteries and features overcharge protection to ensure battery longevity. Please read all instructions carefully before operating the device.
Safety Information
- Do not leave charging unattended. Always monitor the charging process.
- Batteries may become warm during charging. This is normal. However, if batteries become excessively hot, discontinue use immediately.
- Use only NiMH rechargeable batteries with this charger. Attempting to charge non-rechargeable batteries may result in personal injury or damage to the charger and batteries.
- Do not short-circuit batteries or dispose of them in fire.
- Keep the charger and batteries away from water and moisture.
- Do not disassemble or modify the charger.
- Dispose of used batteries and the charger according to local regulations.
- Proposition 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Package Contents
- 1 x Rayovac 4-Position AA/AAA Battery Charger
- 2 x Rayovac AA NiMH Rechargeable Batteries
- 2 x Rayovac AAA NiMH Rechargeable Batteries
Setup
- Unpack the Charger: Carefully remove all components from the packaging.
- Inspect for Damage: Check the charger and batteries for any visible damage. Do not use if damaged.
- Remove Protective Strip (if present): Some chargers may include a small, clear plastic strip between the battery contacts and the charger's top contacts for shipping protection. Ensure this strip is removed before first use. If the charger does not light up, check for this strip.
- Connect Power: Plug the USB charging cable into a compatible USB power source (e.g., computer USB port, USB wall adapter). The charger is designed to operate with a 5V DC output.
Image: Rayovac 4-Position AA/AAA Battery Charger in its retail packaging, illustrating the product as it appears when purchased.
Operating Instructions
- Insert Batteries: Place AA or AAA NiMH rechargeable batteries into the charging slots. Ensure correct polarity (+ and - ends) as indicated on the charger and batteries. The charger can accommodate up to four batteries simultaneously (any combination of AA and AAA).
- Initiate Charging: Once batteries are correctly inserted and the charger is connected to a power source, the LED indicators will illuminate to show that charging has begun.
- Charging Time: Batteries typically recharge fully in approximately 8 hours. The charger features overcharge protection to prevent damage to batteries if left connected after full charge.
- Remove Batteries: Once charging is complete, or after approximately 8 hours, carefully remove the batteries from the charger.
Image: The Rayovac charger with two AA and two AAA batteries correctly inserted into their respective charging slots, demonstrating proper battery placement.
Maintenance
- Cleaning: Disconnect the charger from the power source before cleaning. Use a dry, soft cloth to wipe the exterior of the charger. Do not use liquid cleaners or solvents.
- Storage: Store the charger and batteries in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Longevity: Rayovac rechargeable batteries can be recharged up to 1500 times. They are designed to hold power for up to 1 year in storage.
Image: A Rayovac rechargeable battery, highlighting its capability to retain charge for extended periods during storage.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Charger not lighting up / not charging. | Protective plastic strip still in place; loose USB connection; faulty power source. | Ensure the clear plastic protective strip (if any) is removed from between the battery contacts. Check that the USB cable is securely connected to both the charger and the power source. Try a different USB port or power adapter. |
| Batteries get excessively hot during charging. | Incorrect battery type (non-rechargeable); damaged batteries; charger malfunction. | Ensure only NiMH rechargeable batteries are used. Remove batteries immediately if they become excessively hot. Do not use damaged batteries. If the issue persists with new, compatible batteries, discontinue use of the charger. |
| Batteries not holding charge after charging. | Batteries have reached end of life; improper charging. | Rechargeable batteries have a finite number of charge cycles. If batteries no longer hold a charge, they may need to be replaced. Ensure batteries are fully charged (approx. 8 hours). |
Specifications
| Feature | Detail |
|---|---|
| Model Number | PS135-4B GEN |
| Compatible Battery Types | AA and AAA NiMH Rechargeable Batteries |
| Number of Charging Positions | 4 |
| Input Power | USB (5 Volts DC) |
| Typical Charge Time | 8 hours |
| Product Dimensions | 1.5 x 3.94 x 8.98 inches |
| Item Weight | 5.6 ounces |
| UPC | 0012800530441 |
Image: Rear view of the product packaging, detailing technical specifications, features, and multilingual information.
Warranty and Support
Rayovac rechargeable batteries come with a 5-year power guarantee in storage. For specific warranty details regarding the charger and batteries, please refer to the manufacturer's website or contact Rayovac customer support.
For further assistance or inquiries, please visit the official Rayovac website or consult the contact information provided with your product packaging.