Introduction
Thank you for choosing the EcoSmart A19 LED Light Bulb. This manual provides essential information for the safe installation, operation, and maintenance of your new LED bulbs. Please read these instructions carefully before use and retain them for future reference.
Image: An 8-pack of EcoSmart A19 LED light bulbs, showcasing the product packaging and the bulbs themselves.
Safety Information
- Risk of Electric Shock: Always turn off power to the fixture before inspecting, installing, or removing the bulb.
- Indoor Use Only: These bulbs are designed for indoor applications. Do not use in wet locations or where directly exposed to water.
- Non-Dimmable: This bulb is NOT compatible with dimmer switches. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
- Operating Temperature: Do not install in enclosed fixtures that restrict airflow or exceed the bulb's recommended operating temperature.
- Weight: Ensure the fixture can support the weight of the bulb.
- Disposal: Dispose of bulbs according to local regulations.
Setup and Installation
- Turn Off Power: Before installation, ensure the power to the light fixture is turned off at the circuit breaker or wall switch.
- Remove Old Bulb: Carefully unscrew the existing light bulb from the fixture. Allow it to cool if it was recently in use.
- Install New Bulb: Screw the EcoSmart A19 LED bulb into the standard E26 medium screw base socket. Do not overtighten.
- Restore Power: Turn the power back on at the circuit breaker or wall switch.
Image: A close-up of a single EcoSmart A19 LED light bulb, showing its standard screw-in base for easy installation.
Operating Instructions
Once installed, operate the EcoSmart A19 LED bulb using the standard wall switch connected to the fixture. These bulbs provide instant full brightness upon activation.
- On/Off Function: Use the wall switch to turn the light bulb on or off.
- Non-Dimmable: As noted in the safety section, these bulbs are not designed for use with dimmer switches. Attempting to dim them may result in flickering, reduced lifespan, or damage.
Maintenance
- Cleaning: Ensure the power is off before cleaning. Wipe the bulb with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Replacement: Due to their long lifespan (up to 15,000 hours), frequent replacement is not typically required. When replacement is necessary, follow the "Setup and Installation" steps.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bulb does not light up. | No power to the fixture, loose connection, or faulty bulb. | Check circuit breaker and wall switch. Ensure bulb is screwed in securely. Test bulb in another working fixture. |
| Bulb flickers. | Used with a dimmer switch, loose connection, or voltage fluctuation. | Do not use with dimmer switches. Ensure bulb is securely tightened. Consult an electrician if voltage issues are suspected. |
| Light is too dim or too bright. | Incorrect bulb type for application. | Verify the bulb's specifications (840 lumens, 5000K daylight) match your lighting needs. This bulb is not dimmable. |
Specifications
- Brand: EcoSmart
- Model Number: 1001561229
- Bulb Type: LED A19
- Wattage: 9.5 Watts
- Incandescent Equivalent: 60 Watts
- Brightness: 840 Lumens
- Color Temperature: 5000 Kelvin (Daylight)
- Voltage: 120 Volts
- Average Life: 15,000 Hours
- Special Features: Energy Efficient, Non-Dimmable
- Indoor/Outdoor Usage: Indoor
- Product Dimensions: 2.35" W x 4.17" H
- Certification: UL Listed
- Estimated Yearly Energy Cost: $1.14 (based on 3 hrs/day, 11¢/kWh)
Image: A "Lighting Facts" label detailing the bulb's brightness (840 lumens), estimated yearly energy cost ($1.14), life (13.6 years), light appearance (5000K Daylight), and energy used (9.5 watts).
Warranty and Support
For warranty information and customer support, please refer to the packaging of your EcoSmart A19 LED Light Bulbs or visit the official EcoSmart website. Keep your purchase receipt for warranty claims.
Manufacturer: Ecosmart
UPC: 693690568075
