1. Introduction
Thank you for choosing the Citizen Quartz Men's Watch Model BI5017-50E. This timepiece combines classic design with reliable Japanese-quartz movement and Citizen's renowned quality. This manual provides essential information for the proper setup, operation, and care of your watch to ensure its longevity and accurate performance.
Figure 1: Front view of the Citizen Quartz Men's Watch BI5017-50E.
2. Key Features
- Japanese-Quartz Movement: Ensures precise and reliable timekeeping.
- 3-Hand Basic Display: Features hour, minute, and second hands for clear time indication.
- Mineral Crystal: Durable and scratch-resistant watch face protection.
- Stainless Steel Case and Bracelet: Provides durability and a classic aesthetic.
- Case Diameter: 40mm, suitable for a comfortable fit.
- Water Resistance: Rated to 50 meters (165 feet), suitable for short periods of recreational swimming, but not for diving or snorkeling.
3. Setup
3.1 Initial Powering
Your Citizen Quartz watch is powered by a long-lasting battery that is charged by light. While it does not require frequent battery changes, it may arrive in a low power state. To ensure optimal performance, expose the watch face to bright light (natural or artificial) for several hours before initial use. Avoid extreme heat.
3.2 Setting the Time and Date
- Locate the Crown: The crown is the small knob on the right side of the watch case.
- Pull Out the Crown: Gently pull the crown out to the first click position to set the date, or to the second click position to set the time. When the screw lock is released, the crown pops out a little and stops in the normal position.
- Set the Date (First Click): Rotate the crown clockwise or counter-clockwise to adjust the date. Avoid setting the date between 9 PM and 1 AM, as this can damage the movement.
- Set the Time (Second Click): Pull the crown out to the second click position. Rotate the crown to move the hour and minute hands. To ensure accurate time setting, synchronize with a reliable time source. Push the crown back in completely to start the watch.
Figure 2: Side view of the watch, highlighting the crown for time and date adjustment.
3.3 Adjusting the Bracelet
The stainless steel bracelet can be adjusted to fit your wrist. This process typically involves removing or adding links. Due to the precision required, it is recommended to have this adjustment performed by a qualified jeweler or watchmaker to prevent damage to the bracelet or watch.
Figure 3: Back view of the watch, showing the bracelet and clasp mechanism.
4. Operating Instructions
4.1 Timekeeping
Once the time and date are set, your watch will continuously display the current time. The quartz movement ensures high accuracy. If the watch stops, ensure it is exposed to sufficient light for recharging.
4.2 Water Resistance
This watch is water resistant to 50 meters (165 feet). This means it is suitable for everyday use and can withstand splashes, rain, and short periods of recreational swimming. It is not suitable for diving, snorkeling, or prolonged water exposure. Always ensure the crown is fully pushed in before any contact with water.
5. Maintenance
5.1 Cleaning
To maintain the appearance of your watch, wipe the case and bracelet regularly with a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid using chemical cleaners, as these can damage the watch's finish.
5.2 Powering and Storage
As a light-powered watch, regular exposure to light is essential. If stored in darkness for extended periods, the watch may stop. To restart, expose it to bright light. Store your watch in a cool, dry place, away from direct sunlight for prolonged periods when not in use, to prevent potential discoloration or damage from excessive heat.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Watch has stopped or is running slowly. | Insufficient light exposure. | Expose the watch face to bright light for several hours to recharge. |
| Time is incorrect. | Crown not fully pushed in after setting, or accidental adjustment. | Reset the time and ensure the crown is fully pushed back into the case. |
| Date is incorrect. | Date not set correctly, or month with fewer than 31 days. | Adjust the date using the crown. Manually adjust at the end of months with less than 31 days. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | BI5017-50E |
| Movement | Japanese-Quartz |
| Case Material | Stainless Steel |
| Band Material | Stainless Steel |
| Crystal Type | Mineral Crystal |
| Case Diameter | 40mm |
| Water Resistance | 50m (165ft) - Suitable for recreational swimming, not diving. |
| Product Dimensions | 3.15 x 4.02 x 3.94 inches |
| Item Weight | 5.29 ounces |
| Battery Type | 1 Lithium Ion battery (included, light-charged) |
8. Product Video Demonstration
Video 1: A brief overview of the Citizen Men's Quartz Stainless Steel Casual Watch, Model BI5017-50E, showcasing its design and features.
9. Warranty & Support
For warranty information and customer support, please refer to the official Citizen Watch Company website or the warranty card included with your purchase. Keep your proof of purchase for any warranty claims.
For further assistance, please contact Citizen customer service through their official channels.