Winix 116130 Replacement Filter H Instruction Manual

Introduction

This manual provides essential information for the proper installation, operation, and maintenance of the Genuine Winix 116130 Replacement Filter H. This filter is specifically designed for use with the Winix 5500-2 Air Purifier to ensure optimal air purification performance.

The Winix 116130 Replacement Filter H is a one-year replacement set that includes a True HEPA filter and an Advanced Odor Control (AOC) Carbon filter. The True HEPA filter is 99.97% efficient at capturing particles as small as 0.3 microns, while the AOC Carbon filter is designed to reduce odors and volatile organic compounds (VOCs).

Filter Components

The Winix 116130 Replacement Filter H package contains two primary filter components:

• True HEPA Filter: This pleated filter captures fine airborne particles such as dust mites, pet dander, pollen, and other allergens. It is designed for long-term use, typically requiring replacement annually.
• Advanced Odor Control (AOC) Carbon Filter: This filter is composed of activated carbon granules that absorb household odors, smoke, and VOCs. It is also designed for annual replacement.

Image: The Genuine Winix 116130 Replacement Filter H, showing both the True HEPA filter (white, pleated) and the AOC Carbon filter (black, honeycomb structure).

Image: Close-up views of the AOC Carbon filter (left) and the True HEPA filter (right), highlighting their distinct structures.

Installation Instructions

Follow these steps to correctly install the Winix 116130 Replacement Filter H into your Winix 5500-2 Air Purifier:

1. Power Off and Unplug: Before beginning, ensure the air purifier is turned off and unplugged from the electrical outlet.
2. Remove Front Panel: Gently pull the front panel of the air purifier to detach it.
3. Remove Pre-Filter: Locate the washable pre-filter (mesh-like filter) and remove it. Clean it if necessary according to your air purifier's manual.
4. Remove Old Filters: Carefully remove the used AOC Carbon filter and True HEPA filter from the air purifier. Dispose of them properly.
5. Install New Filters:
   • First, insert the new True HEPA filter into the air purifier. Ensure it is seated correctly.
   • Next, place the new AOC Carbon filter on top of the True HEPA filter. The carbon filter typically has a honeycomb structure.
6. Reinstall Pre-Filter and Front Panel: Place the cleaned pre-filter back into position, then reattach the front panel of the air purifier.
7. Reset Filter Indicator: Plug the air purifier back in. Press and hold the "Filter Reset" button (or equivalent, refer to your air purifier's specific model manual) for approximately 3-5 seconds until the indicator light turns off. This resets the filter life monitor.

Image: An exploded diagram illustrating the correct order of filter installation within the Winix 5500-2 Air Purifier, showing the True HEPA and AOC Carbon filters.

Operating Considerations

Once installed, the Winix 116130 Replacement Filter H works in conjunction with your Winix 5500-2 Air Purifier to continuously clean the air. No specific operational steps are required for the filter itself beyond proper installation and timely replacement.

Ensure your air purifier is operating in an appropriate environment, free from obstructions to airflow, to maximize the effectiveness and lifespan of the filters.

Maintenance and Replacement

The Winix 116130 Replacement Filter H is designed for approximately one year of use under normal operating conditions. The actual lifespan may vary depending on air quality and usage frequency.

• Filter Life Indicator: Your Winix 5500-2 Air Purifier is equipped with a filter replacement indicator. When this indicator illuminates, it signifies that the filters need to be replaced.
• Regular Pre-Filter Cleaning: While the HEPA and Carbon filters are not washable, the pre-filter (which is separate from this replacement set) should be cleaned regularly (e.g., every 2-4 weeks) to maintain optimal performance and extend the life of the main filters.
• Replacement Frequency: For best results and to maintain air purifier efficiency, replace both the True HEPA and AOC Carbon filters annually, or when the filter indicator light signals replacement.

Image: Visual representation of the Winix filter system capturing various airborne particles, emphasizing the importance of regular filter replacement for continued effectiveness.

Troubleshooting

If you experience issues after replacing your filters, consider the following:

• Filter Indicator Still On: Ensure you have properly reset the filter indicator light on your air purifier after installation. Refer to your air purifier's user manual for specific instructions on resetting the filter life monitor.
• Reduced Airflow or Odor Persistence:
  • Verify that the new filters are installed in the correct orientation and are fully seated within the air purifier.
  • Check if the pre-filter is clean and not obstructed. A dirty pre-filter can restrict airflow.
  • Ensure the air purifier's intake and output vents are not blocked.
• Unusual Noise: Confirm that all filters and the front panel are securely in place. Loose components can cause rattling or buzzing sounds.

If problems persist, consult the full user manual for your Winix 5500-2 Air Purifier or contact Winix customer support.

Specifications

Warranty and Support

The Winix 116130 Replacement Filter H is a consumable item. According to product specifications, there is no specific warranty provided for this replacement filter.

For any questions regarding the installation, performance, or compatibility of your Winix filter, please refer to the user manual of your Winix 5500-2 Air Purifier or contact Winix customer support directly. Genuine Winix filters are recommended to ensure optimal performance and maintain the warranty of your Winix air purifier unit.

You can find more information and support on the official Winix website or through authorized Winix retailers.