1. Introduction
The Yale DDV5800 Digital Door Viewer enhances your home security by providing a clear view of who is at your door. Equipped with a 4.3-inch LCD screen, a 110-degree wide-angle camera, and an integrated doorbell, this device allows you to see and record visitors. It features night vision for low-light conditions and automatically captures images or videos when the doorbell is pressed or motion is detected, storing them on a supplied Micro-SD card.
Image 1: The Yale DDV5800 Digital Door Viewer's indoor display unit, featuring a large screen and control buttons on the side.
2. Package Contents
Please check that all the following components are included in your package:
- 1 x Digital Door Viewer (Outdoor Camera Unit)
- 1 x LCD Screen (Indoor Display Unit)
- 1 x Screen Holder
- 3 x Adapter Tubes (for various door thicknesses)
- 1 x Set of AAA Batteries (4 included)
- 1 x Tool Key
- 1 x Instruction Manual (this document)
- 1 x Adhesive Fixing
- 1 x 4GB Micro-SD Card (pre-installed or separate)
3. Setup and Installation
The Yale DDV5800 is designed for easy installation, replacing a traditional optical peephole. It is suitable for doors with a thickness between 38mm and 110mm and existing peephole holes with a diameter between 14mm and 22mm.
3.1. Preparation
- Ensure your door meets the thickness and peephole diameter requirements.
- Remove any existing traditional peephole from your door.
- Insert the 4 AAA batteries into the indoor display unit.
- Ensure the 4GB Micro-SD card is correctly inserted into the designated slot on the indoor unit.
3.2. Installing the Outdoor Camera Unit
- Insert the outdoor camera unit through the peephole hole from the exterior side of the door.
- Ensure the unit is oriented correctly with the camera lens and doorbell button facing outwards.
Image 2: The outdoor camera unit of the Yale DDV5800, showing the camera lens, infrared sensor, and doorbell button, along with an illustration of its 110-degree viewing angle.
3.3. Attaching the Indoor Display Unit
- From the interior side of the door, slide the screen holder over the cable extending from the outdoor unit.
- Select the appropriate adapter tube based on your door's thickness and screw it onto the outdoor unit's thread.
- Connect the cable from the outdoor unit to the indoor display unit.
- Mount the indoor display unit onto the screen holder, securing it with the provided adhesive fixing or screws if applicable. Ensure the unit is level and firmly attached.
- Use the tool key to tighten the components if necessary.
4. Operating Instructions
The Yale DDV5800 is designed for straightforward operation to monitor your doorstep.
4.1. Viewing Live Feed
To view who is at your door, simply press the power button on the side of the indoor display unit. The 4.3-inch LCD screen will activate, showing a live video feed from the outdoor camera. The 110-degree wide-angle lens provides a broad perspective of your doorstep.
Image 3: A hand pressing a button on the Yale DDV5800 indoor unit, displaying a clear image of a person standing outside the door.
4.2. Photo and Video Recording
The device can record images or videos automatically:
- Doorbell Activation: When a visitor presses the doorbell button on the outdoor unit, the indoor screen will activate, and the device will automatically capture an image or record a short video.
- Motion Detection: The integrated motion sensor can detect movement at your door and automatically trigger image or video recording.
- All recorded images and videos are stamped with the date and time for accurate record-keeping.
Image 4: A person viewing the Yale DDV5800 screen, which displays a family standing at the door, demonstrating the clear visual output.
4.3. Night Vision
The outdoor camera unit is equipped with infrared (IR) capabilities, enabling clear visibility even in low-light or nighttime conditions. This ensures you can identify visitors at any time of day.
4.4. Accessing Recordings
Recorded images and videos are stored on the 4GB Micro-SD card. You can access these recordings directly from the indoor display unit using the menu buttons, or by removing the Micro-SD card and viewing its contents on a computer or compatible device.
5. Maintenance
Regular maintenance ensures optimal performance and longevity of your Yale DDV5800 Digital Door Viewer.
- Battery Replacement: The device is powered by 4 AAA batteries. When the battery indicator shows low power, replace all four batteries with new ones. Ensure correct polarity.
- Cleaning: Use a soft, dry cloth to clean the LCD screen and the camera lens. Avoid abrasive cleaners or solvents that could damage the surfaces.
- Micro-SD Card Management: Periodically review the contents of your Micro-SD card. If the card becomes full, you may need to delete old recordings or format the card to free up space. Back up important recordings before deleting.
- Environmental Conditions: While the outdoor unit is designed for exterior use, extreme weather conditions may affect performance. Ensure the unit is securely mounted and protected from direct heavy rain if possible.
6. Troubleshooting
If you encounter issues with your Yale DDV5800, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Dead or incorrectly inserted batteries. | Replace batteries with new AAA batteries, ensuring correct polarity. |
| Poor image quality / Screen displays stripes. | Dirty camera lens or screen; loose cable connection; low light conditions. | Clean the camera lens and screen. Check the cable connection between the outdoor and indoor units. Ensure sufficient lighting for optimal image clarity. |
| No recording when doorbell is pressed or motion detected. | Micro-SD card full or not inserted; recording function disabled. | Check if the Micro-SD card is correctly inserted and has free space. Ensure automatic recording is enabled in the device settings. |
| Night vision is unclear or ineffective. | Obstruction of IR sensors; extreme darkness beyond sensor capability. | Ensure nothing is blocking the IR sensors on the outdoor unit. While night vision is provided, extreme darkness may still limit visibility. |
| Doorbell sound is not working. | Speaker issue; volume set to minimum. | Check device settings to ensure doorbell sound is enabled and volume is not muted. |
7. Specifications
Detailed technical specifications for the Yale DDV5800 Digital Door Viewer:
| Feature | Specification |
|---|---|
| Model Name | DDV 5800 |
| Screen Size | 4.3 inches LCD |
| Camera Resolution | 0.3 Megapixel (Infrared) |
| Video Recording Resolution | 1080p (for recorded video) |
| Viewing Angle | 110 Degrees |
| Door Thickness Compatibility | 38mm to 110mm |
| Peephole Diameter Compatibility | 14mm to 22mm |
| Power Source | 4 x AAA Batteries (included) |
| Storage | 4GB Micro-SD Card (included) |
| Special Features | Night Vision, Motion Detection, Integrated Doorbell (80 dB), Date/Time Stamp |
| Material | Metal |
| Color | Silver |
| Dimensions (L x W x H) | 17.5 x 5.5 x 19.5 cm |
| Weight | 380 grams |
Image 5: Dimensions of the Yale DDV5800 indoor display unit, showing a width of 138mm, height of 86mm, and a 4.3-inch screen diagonal.
8. Warranty and Support
Yale products are manufactured to high standards and undergo rigorous quality control. For specific warranty details, please refer to the warranty card included in your product packaging or visit the official Yale website for your region.
If you require technical assistance, have questions about installation, or need to report a fault, please contact Yale customer support. Contact information can typically be found on the Yale website or in the product documentation.
When contacting support, please have your product model (DDV5800) and purchase information readily available.
