AIBOO Dimmable LED Under Cabinet Puck Lights (Model YK-300000197) Instruction Manual

Introduction

This instruction manual provides comprehensive guidance for the installation, operation, and maintenance of your AIBOO Dimmable LED Under Cabinet Puck Lights. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Package Contents

Verify that all components listed below are included in your package:

3 x LED Puck Lights
1 x 3-Way Splitter
1 x RF Remote Control
1 x LED Controller
1 x 12V 0.5A Power Adapter
1 x On/Off Switch Cable
6 x Adhesive Stickers
6 x Mounting Screws

Image showing all components included in the AIBOO Dimmable LED Under Cabinet Puck Lights kit: three puck lights, a 3-way splitter, an RF remote control, an LED controller, a 12V 0.5A power adapter, an on/off switch cable, adhesive stickers, and mounting screws.

Figure 1: All components included in the package. This image displays the puck lights, splitter, remote, controller, adapter, on/off switch, stickers, and screws.

Specifications

Feature	Detail
Model Number	YK-300000197
Brand	AIBOO
Puck Light Dimensions (L x W x H)	6 x 6 x 0.8 cm (2.3 x 2.3 x 0.3 inches)
Weight	204 grams (total package)
Number of Puck Lights	3
Input Voltage	110 Volts
Wattage (per light)	2 Watts
Remote Control Battery	1 x CR2 (included)
UPC / GTIN	712411876784

Image displaying the dimensions of the puck lights (6cm diameter, 0.8cm thickness) and the lengths of various cables: on/off switch cable (50cm), 3-way splitter cable (100cm), LED controller cable (30cm), and power adapter cable (150cm).

Figure 2: Product dimensions and cable lengths. This image provides measurements for the puck lights and connecting cables.

Setup and Installation

Follow these steps to properly install your LED puck lights:

Plan Placement: Determine the desired locations for your three puck lights under your cabinet or shelf. Ensure the cables can reach the central splitter and power source.
Mount Puck Lights:
- Using Adhesive Stickers: Peel the backing from the adhesive stickers and firmly press them onto the back of each puck light. Then, press the lights onto the desired clean, dry surface.
- Using Screws: For a more permanent installation, use the provided screws to mount the puck lights. Mark the screw holes, pre-drill if necessary, and secure the lights.
Connect Puck Lights to Splitter: Connect the cable from each puck light to one of the three ports on the 3-way splitter.
Connect Splitter to Controller: Connect the main cable from the 3-way splitter to the input port of the LED controller.
Connect On/Off Switch (Optional): If you wish to use the inline on/off switch, connect the LED controller to the switch cable. If not, proceed to the next step.
Connect On/Off Switch (or Controller) to Power Adapter: Connect the output of the on/off switch cable (or directly from the LED controller if not using the switch) to the 12V 0.5A power adapter.
Plug into Power: Plug the power adapter into a standard 110V electrical outlet.
Cable Management: Secure any excess cabling using cable clips or ties (not included) for a neat and safe installation.

Operating Instructions

Your AIBOO LED puck lights are controlled by the included RF remote. Ensure the remote has a working CR2 battery installed.

Image of the new version RF remote control with buttons labeled ON, OFF, LIGHT+, LIGHT-, BRIGHT+, BRIGHT-, 100%, 50%, 25%, Pair, 1H, Decode, 8H, 4H, 2H. Text descriptions explain that ON/OFF gradually adjusts brightness, Pair/Decode repairs the remote, and 1H/2H/4H/8H set auto-off timers.

Figure 3: RF Remote Control Functions (New Version). This image details the buttons and their corresponding actions for controlling the lights.

Power On/Off: Press the ON button to turn the lights on. Press the OFF button to turn them off.
Adjust Brightness:
- Use the BRIGHT+ and BRIGHT- buttons to gradually increase or decrease the light intensity.
- Use the 100%, 50%, and 25% buttons for quick brightness presets.
Pairing/Decoding Remote: If the remote does not control the lights, or if you are pairing a new remote, press the Pair or Decode button. The lights will flicker to indicate successful pairing.
Timer Function: Set an automatic shut-off timer by pressing the 1H, 2H, 4H, or 8H buttons. The lights will turn off after the selected duration.

Image demonstrating 10 levels of adjustable brightness for the puck lights, ranging from very dim to very bright, controlled by the RF remote.

Figure 4: Adjustable Brightness Levels. This image illustrates the range of brightness settings available via the remote control.

Maintenance

Cleaning: Disconnect power before cleaning. Use a soft, dry cloth to wipe the puck lights and remote control. Do not use abrasive cleaners or solvents.
Remote Battery Replacement: If the remote control's range decreases or it stops responding, replace the CR2 battery. Refer to the remote's battery compartment for instructions on how to open and replace the battery.
General Care: Avoid exposing the lights or controller to excessive moisture or extreme temperatures.

Troubleshooting

Problem	Possible Cause	Solution
Lights do not turn on.	No power to adapter. Loose connections. Remote not paired or battery dead.	Check if the power adapter is securely plugged into a working outlet. Ensure all cables (puck lights, splitter, controller, adapter) are firmly connected. Replace remote battery or re-pair the remote using the "Pair" or "Decode" button.
Remote control is unresponsive.	Dead battery. Remote not paired. Obstruction between remote and controller.	Replace the CR2 battery in the remote. Re-pair the remote with the controller. Ensure the remote has a clear line of sight or is within range of the controller.
Lights flicker or dim unexpectedly.	Loose connection. Power supply issue.	Check all cable connections for tightness. Ensure the power outlet is stable and not overloaded.

Warranty and Support

AIBOO products are designed for reliability and performance. For specific warranty information or technical support, please refer to the product packaging or contact AIBOO customer service directly through their official website or the retailer where the product was purchased. Please have your model number (YK-300000197) and purchase date available when contacting support.

AIBOO YK-300000197