1. Product Overview
The SPARTAN RJ8 Restroom Cleaner is a powerful solution designed for effective cleaning of various restroom surfaces. It features strong whitening action and enhanced cleaning capabilities to keep tile and grout bright. This product is formulated to rejuvenate tile and grout, fighting tough stains and soap scum. It is supplied in 32 oz. quart bottles, with 12 bottles per case, and includes 3 trigger sprayers and gloves for application.
Image of SPARTAN RJ8 Restroom Cleaner bottles and packaging. This image displays the SPARTAN RJ8 Restroom Cleaner product, typically sold in cases of 12 quart bottles, along with included trigger sprayers and gloves.
Key Features:
- Powerful restroom cleaner for various surfaces.
- pH level: 13.0 - 13.2.
- Designed for simple spray and wipe application.
- Acts as a tile and grout rejuvenator.
- Effectively fights stains and soap scum.
2. Safety Information
This product is a strong chemical cleaner. Adhere to all safety precautions to prevent injury or damage.
- Wear Protective Gear: Always wear chemical-resistant gloves and eye protection (safety glasses or goggles) when handling this product.
- Ventilation: Use in a well-ventilated area. If ventilation is inadequate, wear appropriate respiratory protection (e.g., a respirator).
- Skin and Eye Contact: Avoid contact with skin and eyes. In case of contact, flush immediately with plenty of water for at least 15 minutes and seek medical attention.
- Ingestion: Do not ingest. If swallowed, do not induce vomiting. Drink plenty of water and seek immediate medical attention.
- Clothing: This product may bleach or damage clothing. Avoid contact with fabrics.
- Storage: Keep container tightly closed when not in use. Store in a cool, dry place, away from direct sunlight and incompatible materials.
- Keep Out of Reach: Keep out of reach of children and pets.
- Mixing: Do not mix with other cleaning products, especially those containing bleach or acids, as this may release hazardous gases.
3. Setup
Before first use, prepare the product and your work area.
- Unpack Contents: Remove the RJ8 Restroom Cleaner bottles, trigger sprayers, and gloves from the packaging.
- Attach Sprayer: Twist the trigger sprayer onto a bottle of RJ8 Restroom Cleaner until securely fastened. Ensure the nozzle is in the 'OFF' position when not in use.
- Prepare Work Area: Ensure the area to be cleaned is well-ventilated. Remove any items that could be damaged by the cleaner.
- Don Protective Gear: Put on the provided gloves and any other recommended personal protective equipment (PPE) such as eye protection and a respirator if necessary.
4. Operating Instructions
Follow these steps for effective cleaning:
General Application:
- Ensure the sprayer nozzle is set to the 'SPRAY' or 'STREAM' position.
- Spray the RJ8 Restroom Cleaner directly onto the surface to be cleaned.
- Allow the product to dwell on the surface for a few minutes (typically 1-5 minutes) to allow the powerful cleaning agents to work. For tougher stains, a longer dwell time may be beneficial, but do not allow the product to dry on the surface.
- Wipe the surface clean with a damp cloth, sponge, or brush.
- Rinse the surface thoroughly with water, especially on surfaces that come into contact with skin or food.
- For heavily soiled areas, a second application or light scrubbing may be required.
Specific Applications:
- Tile and Grout: Spray directly onto tile and grout lines. Allow to penetrate, then scrub with a brush and rinse.
- Soap Scum: Apply to soap scum buildup on shower walls, tubs, and sinks. Let sit briefly, then wipe and rinse.
- Stains: For stubborn stains, apply directly, allow a longer dwell time (up to 5 minutes), then scrub and rinse. Test on an inconspicuous area first.
- Urinals/Toilets: Spray inside the bowl and under the rim. Allow to dwell, then brush and flush.
5. Maintenance
Proper storage and handling ensure the longevity and effectiveness of the product.
- Storage: Store RJ8 Restroom Cleaner in its original container, tightly sealed, in a cool, dry, well-ventilated area. Avoid extreme temperatures.
- Container Integrity: Do not reuse empty containers. Dispose of them according to local regulations.
- Sprayer Care: After use, ensure the trigger sprayer nozzle is set to 'OFF'. If the sprayer becomes clogged, rinse it with warm water.
6. Troubleshooting
Refer to the table below for common issues and their solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Stains or soap scum not fully removed. | Insufficient dwell time or heavy buildup. | Increase dwell time (up to 5 minutes). Reapply and scrub with a brush. |
| Product not spraying correctly. | Sprayer nozzle clogged or loose. | Check nozzle for blockages and rinse with warm water. Ensure sprayer is tightly attached to the bottle. |
| Strong odor during use. | Inadequate ventilation. | Ensure the area is well-ventilated. Open windows or use exhaust fans. Consider wearing a respirator. |
7. Specifications
Detailed product specifications for SPARTAN RJ8 Restroom Cleaner Model 711003.
| Attribute | Value |
|---|---|
| Brand | SPARTAN |
| Model Number | 711003 |
| Item Form | Spray |
| Scent | Fresh |
| Specific Uses For Product | Bathtub, Tile, Grout, Restroom Surfaces |
| Material Feature | Scented |
| pH | 13.0 - 13.2 |
| Package Dimensions | 14 x 10.75 x 10.5 inches |
| Item Weight | 28.78 Pounds (per case) |
| Manufacturer | Spartan Chemical |
| Date First Available | August 24, 2016 |
8. Warranty Information
Specific warranty details for SPARTAN RJ8 Restroom Cleaner Model 711003 are not provided in this manual. For information regarding product warranties, please contact Spartan Chemical directly or refer to the product packaging for any included warranty statements.
9. Support
For further assistance, technical support, or inquiries regarding SPARTAN RJ8 Restroom Cleaner Model 711003, please contact the manufacturer or your authorized distributor.
- Manufacturer: Spartan Chemical
- Contact Information: Please refer to the official Spartan Chemical website or product packaging for current contact details.
