1. Introduction
This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your EVGA GeForce GTX 1070 FTW GAMING ACX 3.0 graphics card. This high-performance graphics card is designed to deliver an exceptional visual experience for gaming and demanding applications. It features NVIDIA's Pascal architecture, EVGA ACX 3.0 cooling technology, RGB LED lighting, and a double BIOS for enhanced reliability and customization.
Please read this manual carefully before installing and operating your new graphics card to ensure proper functionality and to maximize its performance and lifespan.
2. What's in the Box
Verify that all components are present in your package:
- EVGA GTX 1070 FTW GAMING ACX 3.0 Graphics Card
- Driver CD
- Installation Guide
- 6Pin(2) to 8 Pin Adapter
- EVGA Gaming Poster
- Powered by EVGA Case Badge
- EVGA Enthusiast Built Sticker
Image: Retail packaging for the EVGA GeForce GTX 1070 FTW GAMING ACX 3.0 graphics card.
3. System Requirements
Before installing your graphics card, ensure your system meets the following minimum requirements:
- Motherboard: PCI Express, PCI Express 2.0, or PCI Express 3.0 compliant motherboard with one graphics slot.
- Power Supply: Minimum 500 Watt or greater power supply with two 8-pin PCI Express power connectors.
- Operating System: Windows 10 (32/64bit), Windows 8 (32/64bit), or Windows 7 (32/64bit).
- Memory: 4GB system memory (8GB recommended).
- Storage: 100MB of available hard-disk space for driver installation.
- Display: DVI, HDMI, or DisplayPort compatible monitor.
4. Setup and Installation
Follow these steps to install your EVGA GeForce GTX 1070 FTW GAMING ACX 3.0 graphics card:
- Prepare Your System:
- Turn off your computer and disconnect the power cable from the wall outlet.
- Open your computer case.
- If an existing graphics card is installed, carefully remove it.
- Install the Graphics Card:
- Locate an available PCI Express x16 slot on your motherboard.
- Remove the corresponding expansion slot covers from your computer case.
- Align the graphics card with the PCI Express slot and press down firmly until it is securely seated.
- Secure the card to the case with the retaining screw or clip.
Image: Front view of the EVGA GeForce GTX 1070 FTW GAMING ACX 3.0 graphics card, showing the dual fans and ACX 3.0 cooler.
- Connect Power Cables:
- Connect two 8-pin PCI Express power connectors from your power supply to the corresponding ports on the top edge of the graphics card.
- If your power supply only has 6-pin connectors, use the provided 6Pin(2) to 8 Pin Adapter.
Image: Top view of the graphics card, highlighting the two 8-pin power connectors.
Image: A 6-pin to 8-pin PCI Express power adapter cable.
- Close Case and Connect Display:
- Close your computer case.
- Connect your display monitor to one of the output ports on the graphics card (DisplayPort, HDMI, or DVI).
Image: Rear I/O panel of the graphics card, showing DisplayPort, HDMI, and DVI outputs.
- Power On and Install Drivers:
- Reconnect the power cable and turn on your computer.
- Once Windows loads, install the graphics drivers from the included CD or download the latest drivers from the official NVIDIA or EVGA website.
5. Operating Instructions
After successful installation and driver setup, your EVGA GeForce GTX 1070 FTW GAMING ACX 3.0 graphics card is ready for use. The card will automatically manage its clock speeds and power consumption based on the workload.
5.1 EVGA PrecisionX OC Software
For advanced control and monitoring, install the EVGA PrecisionX OC software. This utility allows you to:
- Monitor GPU temperature, clock speeds, and fan speeds.
- Adjust clock speeds for overclocking.
- Customize the RGB LED lighting on the card.
- Create custom fan curves for optimized cooling and noise levels.
- Utilize DX12 OSD (On-Screen Display) for real-time performance metrics in games.
5.2 Double BIOS Feature
The graphics card is equipped with a Double BIOS feature, providing a backup BIOS in case of a failed overclock or BIOS corruption. A small switch on the card allows you to toggle between the primary and secondary BIOS. This feature enhances reliability and safety during experimentation with custom settings.
5.3 ACX 3.0 Cooling Technology
The EVGA ACX 3.0 cooling system features optimized swept fan blades, double ball bearings, and an extreme low power motor. This design delivers increased airflow with less power consumption, contributing to cooler operation and quieter gaming. SHP 2.0 technology further enhances cooling with increased heat pipes and copper contact area.
6. Maintenance
Proper maintenance ensures the longevity and optimal performance of your graphics card:
- Keep Drivers Updated: Regularly check the NVIDIA or EVGA website for the latest graphics drivers. Updated drivers often include performance improvements, bug fixes, and compatibility enhancements.
- Dust Removal: Periodically clean dust from the graphics card fans and heatsink using compressed air. Ensure the computer is powered off and unplugged before cleaning. Dust buildup can impede cooling performance.
- Monitor Temperatures: Use EVGA PrecisionX OC or similar software to monitor GPU temperatures, especially during heavy loads. Ensure temperatures remain within safe operating limits (typically below 80-85°C under load).
- Ensure Proper Airflow: Maintain good airflow within your computer case by ensuring proper cable management and adequate case fans.
7. Troubleshooting
If you encounter issues with your graphics card, refer to the following troubleshooting tips:
- No Display Output:
- Ensure the monitor cable is securely connected to the graphics card and the monitor.
- Verify that the graphics card is fully seated in the PCI Express slot.
- Confirm that all required 8-pin power connectors are securely attached to the graphics card.
- Test with a different monitor or cable if possible.
- System Instability or Crashes:
- Ensure graphics drivers are up to date. Consider performing a clean installation of drivers.
- Check GPU temperatures. Overheating can cause instability.
- Verify your power supply meets the minimum wattage requirement and provides stable power.
- If overclocking, revert to default clock speeds to rule out instability caused by aggressive settings.
- Poor Performance in Games:
- Ensure graphics drivers are up to date.
- Check in-game graphics settings; reduce settings if necessary.
- Monitor GPU usage and clock speeds using PrecisionX OC to ensure the card is boosting correctly.
- Verify that your CPU and RAM are not bottlenecking the GPU.
- RGB LED Not Working:
- Ensure EVGA PrecisionX OC software is installed and running.
- Check LED settings within PrecisionX OC.
8. Specifications
Detailed technical specifications for the EVGA GeForce GTX 1070 FTW GAMING ACX 3.0 (Model: 08G-P4-6276-KR):
| Feature | Specification |
|---|---|
| GPU | NVIDIA GeForce GTX 1070 |
| CUDA Cores | 1920 |
| Base Clock | 1607 MHz |
| Boost Clock | 1797 MHz |
| Memory Detail | 8192MB GDDR5 |
| Memory Clock | 8000 MHz Effective |
| Memory Bit Width | 256 Bit |
| Memory Bandwidth | 256.3 GB/s |
| Interface | PCI Express 3.0 |
| Max Digital Resolution | 7680x4320 |
| Max Monitors Supported | 4 |
| Video Output | HDMI, DisplayPort 1.4, Dual-Link DVI |
| Power Connectors | Two 8-pin |
| Dimensions (LxWxH) | 10.5 x 5.06 x 1.5 inches (266.7 x 128.625 x 38.1 mm) |
| Weight | 3 pounds |
| Cooling | EVGA ACX 3.0 |
| Features | RGB LED, Double BIOS, DX12 OSD Support (PXOC) |
Image: A chart detailing the specifications of the EVGA GeForce GTX 1070 FTW GAMING ACX 3.0 graphics card.
9. Warranty and Support
EVGA products are backed by a limited warranty. For specific warranty terms and conditions applicable to your region and product, please visit the official EVGA website. Registration of your product is recommended to facilitate warranty claims and access support resources.
9.1 Technical Support
For technical assistance, driver downloads, or further information, please visit the EVGA support website:
You can also find FAQs, user forums, and contact information for customer service on their website.
