Introduction
This manual provides instructions for the installation and maintenance of the ENERLITES 8836-W Decorator Wall Plate. This product is designed to cover standard decorator light switches or receptacle outlets, offering a durable and aesthetically pleasing finish to your electrical installations.
Image: Front view of the ENERLITES 6-gang decorator wall plate in white, showing six openings for switches or receptacles and screw holes.
Product Features
- Material: Constructed from polycarbonate thermoplastic for enhanced durability, flexibility, and resistance to impacts.
- Heat and Fade Resistance: Designed to withstand temperatures over 100 degrees Fahrenheit, preventing discoloration and fading over time.
- Flammability Rating: UL94, V2 rated for safety.
- Easy Installation: Direct replacement for any wall plate of the same configuration.
- Smooth Finish: Features a smooth surface without recessed lines, facilitating easy cleaning.
- Matching Screws: Includes painted screws that match the wall plate color for a cohesive appearance.
- Certifications: UL-listed for safety and quality assurance.
Image: Two ENERLITES 6-gang wall plates, one with standard switches and another with a combination of switches and timers, illustrating complementary variety.
Safety Information
Always prioritize safety when working with electrical components. Failure to follow these instructions may result in electrical shock, fire, or property damage.
- Turn Off Power: Before beginning any installation or maintenance, always turn off power at the circuit breaker or fuse box.
- Verify Power Off: Use a voltage tester to confirm that power is off at the switch or outlet box before touching any wires.
- Qualified Personnel: If you are unsure about any part of the installation process, consult a qualified electrician.
- Proper Tools: Use appropriate insulated tools for electrical work.
Installation Instructions
Follow these steps to install your ENERLITES Decorator Wall Plate:
- Prepare the Area: Ensure the power to the corresponding circuit is turned off at the main electrical panel. Verify with a voltage tester.
- Remove Existing Wall Plate: Carefully unscrew and remove the old wall plate from the electrical box.
- Position New Wall Plate: Align the ENERLITES 8836-W wall plate over the decorator-style switches or receptacles. Ensure the openings match the devices.
- Secure Wall Plate: Use the provided painted screws to attach the wall plate to the electrical box. Tighten screws until the plate is snug against the wall, but do not overtighten, as this can cause cracking.
- Restore Power: Once the wall plate is securely installed, restore power at the circuit breaker.
Image: A person using a power drill to install a wall plate over an electrical box, demonstrating the installation process.
Operation
The ENERLITES 8836-W wall plate serves as a protective and decorative cover for your electrical switches and receptacles. Once installed, it provides a finished appearance and protects the internal wiring and devices from dust and accidental contact. The operation of the underlying electrical devices (switches, outlets) remains unchanged.
Maintenance
To maintain the appearance and cleanliness of your wall plate:
- Cleaning: Wipe the surface with a soft, damp cloth. For stubborn marks, a mild soap solution can be used.
- Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish of the wall plate.
- Regular Inspection: Periodically check the wall plate for any signs of damage or loosening.
Troubleshooting
| Issue | Possible Cause | Solution |
|---|---|---|
| Wall plate does not sit flush. | Electrical box or wall surface is uneven. | Gently adjust the screws. If the issue persists, shims may be needed behind the electrical box. |
| Screws appear stripped or damaged. | Overtightening during installation. | Replace with new screws. Avoid overtightening. |
| Wall plate cracks during installation. | Excessive force or overtightening. | Replace the wall plate. Ensure screws are tightened only until snug. |
Specifications
- Model: 8836-W
- Brand: ENERLITES
- Material: Polycarbonate Thermoplastic
- Color: White
- Configuration: 6-Gang Decorator
- Dimensions (Height x Length): 4.50" x 11.81"
- Thickness: 0.22 Inches
- Finish Type: Smooth
- Installation Type: Screw-In
- Item Weight: 0.01 Ounces
- Certification: UL Listed
- Special Features: Impact Resistance, Heat & Fade Resistant
- Usage: Commercial/Residential
- Included Components: Wall Plate, Screws
Image: A diagram illustrating the dimensions of the 6-gang wall plate, with a height of 4.50 inches and a length of 11.81 inches.
Warranty and Support
For warranty information or technical support regarding your ENERLITES product, please contact the manufacturer directly. Refer to the product packaging or the official ENERLITES website for current contact details and warranty terms.
Manufacturer: Top Greener Inc.
You can visit the ENERLITES Store on Amazon for more product information.
