Pinnacle ED 860 Compact Electric Dryer User Manual

1. Introduction

Thank you for choosing the Pinnacle ED 860 Compact Electric Dryer. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new appliance. Please read all instructions carefully before using the dryer and retain this manual for future reference.

Figure 1.1: Front view of the Pinnacle ED 860 Compact Electric Dryer, showing the control panel and circular door.

2. Safety Information

Your safety and the safety of others are very important. Please read all safety messages in this manual and on your appliance. Failure to follow these instructions may result in fire, electric shock, property damage, personal injury, or death.

General Safety Precautions:

• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Keep children away from the dryer. Do not allow children to play on or in the dryer.
• Do not install or store this appliance where it will be exposed to the weather.
• Do not dry articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances.
• Do not reach into the dryer if the drum is moving.
• Always disconnect the dryer from the power supply before attempting any service or cleaning.
• Ensure proper ventilation for the dryer.
• The dryer is equipped with overheating protection. If the dryer overheats, it will automatically shut off.

3. Product Overview

The Pinnacle ED 860 is a compact electric dryer designed for efficient and convenient laundry care. Key features include:

• Sensor Dry Feature: Automatically detects moisture levels and adjusts drying time to prevent over-drying.
• Refresh Function: A 12-minute hot dry cycle to ease folding and reduce wrinkles.
• Pause Function: Allows you to temporarily stop the cycle.
• Child Lock: Prevents unintended operation by children.
• Wrinkle Guard: Helps minimize wrinkles by tumbling clothes intermittently after the cycle ends.
• Digital Control Panel: Modern interface for easy program selection and monitoring.
• 180-Degree Door Swing: Provides wide access to the drum for loading and unloading.
• Adjustable Leveling Legs: For stable installation on uneven surfaces.

Control Panel Features:

Figure 3.1: Close-up of the digital control panel, showing program and heat level options.

The digital control panel allows you to select various drying programs and heat levels. Options typically include:

• Program: Time, Sensor, Air+High, Half
• Heat Level: High, Air+High, Half

Figure 3.2: Illustrates the selection of custom dry times for specific items.

4. Setup & Installation

Proper installation is crucial for the safe and efficient operation of your dryer. This appliance is designed for freestanding installation.

Unpacking:

• Carefully remove all packaging materials.
• Inspect the dryer for any shipping damage. Report any damage immediately to your retailer.
• Confirm all included components are present: Only the unit is included.

Location Requirements:

• Place the dryer on a firm, level floor.
• Ensure adequate clearance around the dryer for proper ventilation and maintenance.
• Do not install in an area where water freezing may occur.

Leveling the Dryer:

The dryer is equipped with adjustable leveling legs. Use a level to ensure the dryer is perfectly balanced. Adjust the legs by turning them clockwise or counter-clockwise until the appliance is stable and level.

Electrical Connection:

• The dryer requires a 120 Volts electrical supply.
• It comes with a 3-pin standard electrical plug. Ensure the outlet is properly grounded and matches the plug type.
• Do not use an extension cord.

Venting:

This is a vented dryer. Ensure the exhaust vent is properly installed and clear of obstructions to allow hot, moist air to escape.

5. Operating Instructions

Loading the Dryer:

• Open the dryer door (it swings 180 degrees for easy access).
• Load clothes loosely into the drum. Do not overload.
• Close the door firmly.

Selecting a Drying Cycle:

1. Press the POWER button to turn on the dryer.
2. Use the PROGRAM button to cycle through available drying programs (e.g., Time Dry, Sensor Dry).
3. Use the TEMP button to select the desired heat level (e.g., High, Air+High, Half).
4. For Sensor Dry cycles, the dryer will automatically detect moisture and stop when clothes are dry.


Figure 5.1: Illustration of the Sensor Dry option, which automatically adjusts drying time.

5. To use the Refresh Function, select the appropriate program. This is a 12-minute hot dry cycle designed to reduce wrinkles and ease folding.


Figure 5.2: Explains the Refresh Function, a 12-minute hot dry cycle.

Starting and Pausing:

• Press the START/PAUSE button to begin the selected cycle.
• Press START/PAUSE again to temporarily stop the cycle. Press it once more to resume.

Child Lock:

To activate the Child Lock, refer to the specific instructions on your control panel, usually involving holding down a combination of buttons for a few seconds. This prevents accidental operation.

Wrinkle Guard:

After a cycle completes, the Wrinkle Guard feature may tumble clothes intermittently without heat to help prevent wrinkles from setting in. Refer to your control panel for activation or automatic operation.

6. Maintenance & Care

Regular maintenance ensures optimal performance and extends the life of your dryer.

Cleaning the Lint Filter:

The lint filter should be cleaned after every load to maintain drying efficiency and prevent fire hazards.

1. Open the dryer door.
2. Locate and remove the lint filter, typically found inside the door opening or at the front of the drum.
3. Remove any accumulated lint by hand.
4. Reinsert the lint filter securely.

Figure 6.1: Shows the lint filter being removed for cleaning, highlighting its importance for discarding fiber and dust buildup.

Cleaning the Air Intake:

The air intake should be cleaned occasionally to ensure proper airflow.

1. Locate the air intake shroud, usually at the lower front or side of the dryer.
2. Carefully remove the upper and lower ends of the shroud.
3. Clean any dust or debris from the intake area.
4. Reattach the shroud securely.

Figure 6.2: Demonstrates how to clean the air intake by removing its shroud.

Exterior Cleaning:

Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.

7. Troubleshooting

Before contacting customer service, try the following solutions for common issues:

• Dryer does not start:
  • Ensure the dryer is plugged in securely.
  • Check if the circuit breaker has tripped.
  • Make sure the door is fully closed.
  • Deactivate Child Lock if it is engaged.
• Clothes are not drying properly:
  • Clean the lint filter.
  • Check for obstructions in the exhaust vent.
  • Do not overload the dryer.
  • Select an appropriate drying program and heat level for the fabric type.
• Dryer is noisy:
  • Ensure the dryer is level.
  • Check for foreign objects in the drum.
• Dryer stops unexpectedly:
  • This could be due to the overheating protection system. Allow the dryer to cool down.
  • Check for power interruptions.

8. Specifications

Detailed specifications for the Pinnacle ED 860 Compact Electric Dryer:

Energy Guide:

Figure 8.1: Estimated Yearly Energy Cost and Electricity Use for similar models.

9. Warranty and Support

For warranty information, please refer to the documentation provided with your purchase or visit the official Pinnacle website. For customer support, you may visit the Pinnacle Store on Amazon or contact your retailer.