Introduction
This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Mount-It! MI-509B TV Ceiling Mount Bracket. Please read all instructions carefully before assembly and use. Retain this manual for future reference.
Image: Mount-It! MI-509B TV Ceiling Mount Bracket with a television attached, suspended from a ceiling.
The Mount-It! MI-509B is a full-motion ceiling mount designed for flat panel LCD, LED, and OLED Plasma TVs up to 75 inches and weighing up to 110 pounds. It offers adjustable height, 360-degree rotation, and tilting capabilities to optimize your viewing experience.
Safety Information
- Weight Capacity: Do not exceed the maximum weight capacity of 110 lbs (50 kg). Exceeding this limit may result in serious injury or property damage.
- Screen Size: This mount is designed for TVs between 32 and 75 inches. Ensure your TV's VESA pattern is compatible.
- Structural Integrity: The ceiling structure must be capable of supporting at least five times the weight of the TV and the mount combined. If unsure, consult a qualified professional.
- Installation: Follow all installation instructions carefully. Improper installation can lead to equipment damage or personal injury.
- Tools: Use appropriate tools for installation. Ensure all fasteners are securely tightened.
- Children: Keep children away from the installation area during assembly. Small parts may be a choking hazard.
- Maintenance: Periodically check that the mount is secure and all fasteners are tight.
Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Mount-It! customer support.
- Ceiling Plate
- Adjustable Pole Assembly
- TV Mounting Plate
- VESA Brackets (4 pieces)
- Hardware Kit (various screws, washers, spacers, anchors)
- Instruction Manual
Setup and Installation
Important: Ensure you have identified the correct mounting location and ceiling type (wood stud, concrete, or vaulted ceiling) before proceeding. Two people are recommended for safe installation.
Image: Dimensional diagram of the ceiling mount, illustrating adjustable height from 22 to 35.8 inches and bracket width.
Step 1: Prepare the Ceiling Plate
- Locate the desired mounting position on your ceiling. Use a stud finder to locate wood studs or ensure the concrete ceiling is suitable for drilling.
- Position the ceiling plate and mark the drilling points. For vaulted ceilings, the base allows up to 60 degrees of swivel to accommodate the angle.
- Drill pilot holes according to the marked points and the type of ceiling material.
- Secure the ceiling plate to the ceiling using the appropriate fasteners from the hardware kit. Ensure it is firmly attached.
Image: The ceiling mount shown installed on both a flat ceiling and a slanted ceiling, demonstrating its versatility.
Step 2: Assemble the Pole
- Attach the adjustable pole assembly to the ceiling plate. Ensure the locking mechanism is engaged.
- Adjust the pole to the desired height (between 22 and 36 inches) and secure it using the provided bolts and nuts.
Image: A visual representation of the mount's height adjustment feature, ranging from 22 to 36 inches.
Step 3: Attach VESA Brackets to TV
- Lay your TV face down on a soft, clean surface to prevent scratches.
- Identify the VESA mounting holes on the back of your TV.
- Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern.
- Attach the VESA brackets to the back of your TV, ensuring they are level and securely fastened.
Image: Illustration of the VESA compatibility, showing adjustable arm brackets to fit various VESA patterns.
Step 4: Mount TV to Pole Assembly
- With assistance, carefully lift the TV and hook the VESA brackets onto the TV mounting plate on the pole assembly.
- Ensure the TV is properly seated and level.
- Secure the TV to the mounting plate using the safety screws or locking mechanism provided.
Step 5: Cable Management
Utilize the cable management holes in the bracket plate and pole to route your power and HDMI cables for a clean and organized appearance.
Operating Instructions
The Mount-It! MI-509B offers full motion flexibility to achieve optimal viewing angles.
- Height Adjustment: To adjust the height, loosen the securing bolts on the pole, slide the inner pole to the desired height (22-36 inches), and re-tighten the bolts securely.
- Tilt Adjustment: The TV can be tilted down up to 25 degrees. Loosen the tilt adjustment knobs or bolts on the TV mounting plate, adjust the screen to the desired angle, and re-tighten to secure.
- Swivel/Rotation: The mount allows for a full 360-degree rotation of the TV. Gently rotate the TV to the desired orientation. For slanted ceilings, the base offers up to 60 degrees of swivel.
Image: Visual guide to the mount's full motion capabilities, including base angle, leveling range, and screen tilt.
Maintenance
- Cleaning: Wipe the mount with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the finish.
- Periodic Checks: Every few months, check all screws and bolts to ensure they remain tight and secure. Re-tighten if necessary.
- Damage: If any part of the mount appears damaged or worn, discontinue use and contact Mount-It! customer support for assistance.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level | Mounting plate or VESA brackets not aligned. | Adjust the leveling screws on the mounting plate or re-align VESA brackets on the TV. |
| Mount feels unstable | Loose fasteners or inadequate ceiling support. | Check all bolts and screws for tightness. Ensure ceiling structure meets weight requirements. Consult a professional if needed. |
| Difficulty adjusting tilt/swivel | Adjustment knobs/bolts are too tight. | Loosen the relevant adjustment knobs or bolts slightly, make the adjustment, then re-tighten. |
| Missing parts | Packaging error. | Contact Mount-It! customer support for replacement parts. |
Specifications
| Model Number | MI-509B |
| Brand | Mount-It! |
| Material | Alloy Steel |
| Color | Black |
| Compatible TV Sizes | 32 - 75 inches |
| Weight Capacity | 110 lbs (50 kg) |
| VESA Compatibility | 200x200, 300x300, 400x200, 400x300, 400x400, 600x200, 600x300, 600x400 mm |
| Height Adjustment | 22 - 36 inches (55.9 - 91.4 cm) |
| Tilt Angle | Up to 25 degrees downward |
| Swivel/Rotation | 360 degrees (TV), up to 60 degrees (base for slanted ceilings) |
| Product Dimensions | 30 x 14.5 x 6 inches (approximate, packaged) |
| Item Weight | 0.01 ounces (This value seems incorrect from source, typical mount weight is several pounds) |
Warranty Information
Mount-It! products are backed by a limited warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Mount-It! website.
Customer Support
For technical assistance, missing parts, or warranty claims, please contact Mount-It! customer support. You can find contact information and additional resources on the official Mount-It! website:
