Apollo Valves 69PFT Press Fast Tool User Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of the Apollo 69PFT Press Fast Tool. This tool is designed for use with PEX or copper press fittings, enabling secure and reliable connections. Please read this manual thoroughly before operation to ensure proper usage and to prevent damage or injury.

Important Safety Information

Always observe the following safety precautions:

• Wear appropriate personal protective equipment (PPE), including safety glasses and gloves.
• Ensure the tool is properly attached to an impact wrench capable of 130 pounds of torque.
• Do not use this tool with stainless-steel press fittings.
• Keep hands and loose clothing away from moving parts during operation.
• Disconnect the tool from the power source before performing any maintenance or changing jaws.
• Store the tool and accessories in a dry, secure location when not in use.
• This product may expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Package Contents

Verify that all items listed below are included in your package:

• PressFAST Tool
• 1/2-inch Press Jaw
• 3/4-inch Press Jaw
• 1-inch Press Jaw
• 1/2-inch PEX Jaw
• 3/4-inch PEX Jaw
• 1-inch PEX Jaw
• 3/16-inch Allen Wrench

Image: The Apollo 69PFT Press Fast Tool shown with its included 1/2-inch, 3/4-inch, and 1-inch press jaws, as well as 1/2-inch, 3/4-inch, and 1-inch PEX jaws, and a 3/16-inch Allen wrench.

Setup

1. Prepare the Impact Wrench: Ensure your impact wrench is capable of delivering at least 130 pounds of torque.
2. Attach the PressFAST Tool: Securely attach the Apollo 69PFT PressFAST tool to the chuck of your impact wrench. Ensure it is firmly seated and locked in place to prevent dislodgement during operation.
3. Select the Correct Jaws: Choose the appropriate press or PEX jaws (1/2-inch, 3/4-inch, or 1-inch) that match the size and type of fitting you intend to press.
4. Install the Jaws: Carefully insert the selected jaws into the PressFAST tool. Ensure they are correctly aligned and seated within the tool's mechanism.

Operating Instructions

1. Prepare the Fitting: Ensure the PEX or copper fitting and pipe are clean and properly prepared according to the fitting manufacturer's instructions.
2. Position the Tool: Place the open jaws of the PressFAST tool around the fitting. Ensure the fitting is centered within the jaws.
3. Initiate Pressing: Activate your impact wrench. The tool will begin to press the fitting.
4. Monitor the Blue LED Sensor: Observe the blue LED sensor on the tool. This sensor indicates when a properly sealed connection has been achieved. Continue pressing until the LED illuminates steadily, confirming the seal.
5. Release the Tool: Once the connection is sealed and the LED is steady, release the impact wrench trigger and remove the tool from the fitting.
6. Inspect the Connection: Visually inspect the pressed connection to ensure it is uniform and secure.

Note: The blue LED sensor is a critical indicator for a properly sealed connection. Do not rely solely on visual inspection without confirmation from the LED.

Maintenance

• Cleaning: After each use, wipe down the tool and jaws with a clean, dry cloth to remove any debris or residue.
• Lubrication: Periodically apply a light coat of machine oil to the moving parts of the jaws and tool mechanism to ensure smooth operation and prevent corrosion.
• Inspection: Regularly inspect the jaws for wear, damage, or deformation. Worn or damaged jaws can lead to improper seals and should be replaced immediately.
• Storage: Store the tool and its jaws in their original case or a protective container in a dry environment to prevent rust and damage.
• Allen Wrench: Use the provided 3/16-inch Allen wrench for any necessary adjustments or disassembly as outlined in specific maintenance procedures (if applicable, though not detailed here).

Troubleshooting

Specifications

Warranty and Support

The Apollo 69PFT Press Fast Tool comes with a 2-Year Warranty from the date of purchase, covering defects in materials and workmanship. This warranty does not cover damage resulting from misuse, abuse, normal wear and tear, or unauthorized modifications.

For warranty claims, technical assistance, or replacement parts, please contact Apollo customer support. Keep your proof of purchase for warranty validation.

For further assistance, please refer to the official Apollo Valves website or contact their customer service department.