NAMESAKE Foothill 4-in-1 Convertible Crib User Manual

Introduction

Thank you for choosing the NAMESAKE Foothill 4-in-1 Convertible Crib. This manual provides essential information for the safe assembly, operation, maintenance, and conversion of your crib. The Foothill crib is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and ultimately a full-size bed.

Please read all instructions carefully before assembly and keep this manual for future reference.

Safety Information

Your child's safety is our top priority. This product is manufactured to meet or exceed the following safety standards:

• ASTM International Safety Standards
• U.S. CPSC Safety Standards
• GREENGUARD Gold Certified for low chemical emissions

Important Safety Warnings:

• Always ensure all hardware is securely tightened before use and periodically check for loose fasteners.
• Do not use the crib if any parts are missing, damaged, or broken. Contact customer support for replacement parts.
• The finish is lead and phthalate safe, and non-toxic.
• Maximum Weight Capacity:
  • Toddler Bed Rail: 50 lbs (22.68 kg)
  • Full-Size Bed: 500 lbs
  • Slat Strength: 135 lbs
• Ensure the mattress used with the crib is of the correct size to prevent gaps that could entrap a child.

Setup and Assembly

Initial assembly of the crib is required. Please refer to the separate assembly instructions included in your product packaging for detailed step-by-step guidance on constructing the crib frame. Ensure all components are present and undamaged before beginning assembly.

The crib features hidden hardware construction and four adjustable mattress positions. Adjust the mattress support to the appropriate height for your child's age and developmental stage. The highest position is for infants, and the lowest position is for children who can stand.

Image: The Foothill 4-in-1 Convertible Crib in Manor Grey, shown in a nursery setting, highlighting its design and initial crib configuration.

Operating: Conversion Instructions

The Foothill crib is designed for easy conversion to accommodate your child's growth. Follow these instructions for each conversion stage.

1. Crib Configuration

This is the initial setup. Ensure the mattress support is adjusted to a safe height. For newborns, the highest position is recommended. Lower the mattress support as your child grows and becomes more mobile to prevent climbing out.

Image: A front view of the Foothill Convertible Crib, showcasing its classic design and sturdy construction in Manor Grey.

2. Toddler Bed Conversion

The toddler bed conversion kit is included with your crib. This conversion is suitable when your child begins to climb out of the crib or reaches 35 inches in height. To convert:

1. Remove the front rail of the crib.
2. Attach the toddler bed safety rail to the designated points on the crib frame.
3. Ensure all hardware is securely tightened.

Image: The Foothill Convertible Crib transformed into a toddler bed, featuring a low safety rail for easy access and security, shown in Manor Grey.

3. Daybed Conversion

The daybed configuration provides an open sleeping or lounging space. This conversion typically involves removing the front rail without adding the toddler safety rail. To convert:

1. Remove the front rail of the crib.
2. Ensure all remaining hardware is securely tightened.

Image: The Foothill Convertible Crib configured as a daybed, offering an open design without a front rail, in a dark wood finish. Note: The product is available in Manor Grey, but this image shows a dark wood finish for illustrative purposes.

4. Full-Size Bed Conversion

To convert the crib into a full-size bed, a separate full-size bed conversion kit is required (sold separately). This conversion utilizes the headboard and footboard from the crib. To convert:

1. Disassemble the crib, retaining the headboard and footboard.
2. Attach the full-size bed rails (from the conversion kit) to the headboard and footboard.
3. Install a full-size mattress and box spring (not included).
4. Ensure all hardware is securely tightened.

Image: The Foothill Convertible Crib fully converted into a full-size bed, utilizing the original headboard and footboard, in a dark wood finish. Note: The product is available in Manor Grey, but this image shows a dark wood finish for illustrative purposes.

Maintenance

Proper care and maintenance will ensure the longevity and safety of your Foothill Convertible Crib.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or strong chemicals, as they may damage the finish.
• Hardware: Periodically check all screws, bolts, and fasteners to ensure they are tight. Loose hardware can compromise the crib's stability and safety.
• Storage: If storing the crib, disassemble it carefully and store all parts in a dry, temperate environment to prevent warping or damage.
• Wood Care: The crib is made with New Zealand pine wood and CARB II compliant MDF. Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can affect the wood.

Troubleshooting

If you encounter any issues with your crib, please refer to the following common solutions:

• Squeaking or Wobbling: Check all hardware connections. Tighten any loose screws or bolts. Ensure the crib is on a level surface.
• Difficulty with Conversion: Review the conversion instructions carefully. Ensure all necessary parts are used and aligned correctly. Do not force components into place.
• Missing Parts: If any parts were missing upon delivery, do not attempt to assemble or use the crib. Contact customer support immediately for replacement parts.

Specifications

Warranty Information

The NAMESAKE Foothill 4-in-1 Convertible Crib comes with a 1-year limited warranty from the date of purchase. This warranty covers manufacturing defects in materials and workmanship under normal use. It does not cover damage resulting from misuse, abuse, improper assembly, negligence, alteration, or normal wear and tear.

Please retain your proof of purchase for warranty claims.

Customer Support

For assistance with assembly, missing parts, warranty claims, or any other inquiries regarding your NAMESAKE Foothill 4-in-1 Convertible Crib, please contact the manufacturer, Million Dollar Baby Classic, or your retailer.

When contacting support, please have your product model name (Foothill 4-in-1 Convertible Crib) and ASIN (B01HEUT36U) available.