User Manual: Thumbs Up Pixel Go (150 Games) Mini Retro Games Console

Introduction

This manual provides essential information for the safe and effective use of your Thumbs Up Pixel Go (150 Games) Mini Retro Games Console. Please read this manual thoroughly before operating the device and retain it for future reference.

Package Contents

Verify that all items are present in the package:

• Thumbs Up Pixel Go (150 Games) Mini Retro Games Console
• User Manual (this document)
• (Note: Batteries are not included and must be purchased separately.)

Product Overview

Familiarize yourself with the components of your Pixel Go console:

Figure 1: Front view of the Thumbs Up Pixel Go console, showing the screen, control buttons, and directional pad.

Figure 2: Detailed view of the console's features, including the 1.8-inch full-color LCD screen, A/B action buttons, built-in speakers, and 4-way directional joystick.

The console features a 1.8-inch full-color LCD screen, A/B action buttons, a 4-way directional joystick, and built-in speakers for immersive sound. A mute button is also included for quiet gameplay.

Setup

Battery Installation

The Pixel Go console requires AAA batteries for operation. Follow these steps to install the batteries:

1. Locate the battery compartment on the rear of the console.
2. Open the battery compartment cover.
3. Insert the required AAA batteries, ensuring correct polarity (+/-) as indicated inside the compartment.
4. Close the battery compartment cover securely.

Note: Always use new batteries of the same type. Do not mix old and new batteries, or different types of batteries.

Operating Instructions

Power On/Off

• To power on the console, press and hold the Power button (usually located near the top of the console) until the screen illuminates.
• To power off the console, press and hold the Power button again until the screen turns off.

Game Selection and Play

The console comes pre-loaded with 150 built-in 8-bit games. To select and play a game:

1. Once powered on, the main menu or game list will appear on the screen.
2. Use the 4-way directional joystick to navigate through the game list.
3. Press the 'A' button (action button) to select a game.
4. Follow the on-screen instructions to start playing.

Figure 3: The Pixel Go console in use, displaying a game on its screen.

Figure 4: Examples of the classic 8-bit retro games included with the console.

Volume Control

The console features built-in speakers. To adjust the volume or mute the sound:

• Locate the volume control buttons (usually marked with '+' and '-') or a dedicated mute button on the console.
• Press the '+' button to increase volume, '-' to decrease volume.
• Press the mute button to toggle sound on or off.

Portability

The compact design of the Pixel Go allows for easy portability, fitting into pockets for gaming on the go.

Figure 5: The Pixel Go console is designed for portability, easily fitting into a pocket.

Figure 6: Dimensions of the Pixel Go console: approximately 9.1 cm (3.62 inches) in length, 5 cm (1.97 inches) in height, and 1.6 cm (0.85 inches) in width.

Maintenance

Cleaning

To clean your console:

• Use a soft, dry cloth to wipe the exterior of the console.
• Do not use liquid cleaners, aerosols, or abrasive cleaning agents.

Storage

When not in use, store the console in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the batteries to prevent leakage.

Troubleshooting

If you encounter issues with your Pixel Go console, refer to the following common problems and solutions:

Specifications

Warranty and Support

For warranty information and customer support, please refer to the contact details provided on the product packaging or visit the official Thumbs Up website. Keep your purchase receipt as proof of purchase.

For additional support, you may also contact the seller, You Tec Limited, through the platform where the product was purchased.

Official Product Video